|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Limp had a post office and no railroad service.
The following communities are listed based on their distance from Limp, with the one closest to Limp listed first.
- Hardin Springs
(3 miles [4.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hardin Springs. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Hardin Springs
- Hardin Springs is located in Hardin County
- Big Clifty
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Big Clifty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Big Clifty
- Big Clifty is located in Grayson County
- West Clifty
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for West Clifty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Clifty
- West Clifty is located in Grayson County
- Hudson
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Hudson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hudson
- Hudson is located in Breckinridge County
- Clarkson
(6 miles [9.7 km] to the south)
- Constantine
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Constantine. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Constantine
- Constantine is located in Breckinridge County
- Summit
(6 miles [9.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Summit. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Summit
- Summit is located in Hardin County
- Eveleigh
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Eveleigh have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eveleigh
- Eveleigh is located in Grayson County
- Horntown
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Horntown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Horntown
- Horntown is located in Grayson County
- Howe Valley
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Howe Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howe Valley
- Howe Valley is located in Hardin County
- Leitchfield
(9 miles [14.5 km] to the southwest)
- Grayson Springs
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Grayson Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grayson Springs
- Grayson Springs is located in Grayson County
- White Mills
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for White Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Mills
- White Mills is located in Hardin County
- Buras
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Buras. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Buras
- Buras is located in Breckinridge County
- Custer
(10 miles [16.1 km] to the north)
- Stephensburg
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Stephensburg. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Stephensburg
- Stephensburg is located in Hardin County
- Higdon
(11 miles [17.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Higdon. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Higdon
- Higdon is located in Grayson County
- Duff
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Duff. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Duff
- Duff is located in Grayson County
- Black Rock
(12 miles [19.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Black Rock. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Black Rock
- Black Rock is located in Grayson County
- Peonia
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Peonia. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Peonia
- Peonia is located in Grayson County
- Millerstown
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Millerstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millerstown
- Millerstown is located in Grayson County
- McDaniels
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for McDaniels have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McDaniels
- McDaniels is located in Breckinridge County
- Jump to TripAdvisor's Tourism page for McDaniels <4>
- Melrose
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Melrose. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Melrose
- Melrose is located in Hardin County
- Westview
(13 miles [20.9 km] to the northwest)
- Jump to our Gazetteer entry for Westview
- Westview is located in Breckinridge County
- Millwood
(14 miles [22.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Millwood. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Millwood
- Millwood is located in Grayson County
- Rosetta
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Rosetta have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rosetta
- Rosetta is located in Breckinridge County
- Cecilia
(14 miles [22.5 km] to the east)
- Saint John
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Saint John. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Saint John
- Saint John is located in Hardin County
- Big Spring
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Big Spring
- Big Spring is located in Meade County
Off-the-Road Links ...
The official website for Hardin County: www.hcky.org/ The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Limp, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|