|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Lacon in the Atlas, the following communities of the 1890's would have been found near the current location of Lacon. The following communities are listed based on their distance, with the one closest to Lacon listed first.
- Horntown
(2 miles [3.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Horntown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Horntown
- Horntown is located in Grayson County
- Millerstown
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Millerstown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millerstown
- Millerstown is located in Grayson County
- Higdon
(5 miles [8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Higdon. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Higdon
- Higdon is located in Grayson County
- Melrose
(5 miles [8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Melrose. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Melrose
- Melrose is located in Hardin County
- White Mills
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for White Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Mills
- White Mills is located in Hardin County
- Summit
(5 miles [8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Summit. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Summit
- Summit is located in Hardin County
- Big Clifty
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Big Clifty have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Big Clifty
- Big Clifty is located in Grayson County
- West Clifty
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for West Clifty have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Clifty
- West Clifty is located in Grayson County
- Wheelers Mill
(7 miles [11.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Wheelers Mill. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Wheelers Mill
- Wheelers Mill is located in Grayson County
- Clarkson
(7 miles [11.3 km] to the west)
- Grayson Springs
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Grayson Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grayson Springs
- Grayson Springs is located in Grayson County
- Peonia
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Peonia. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Peonia
- Peonia is located in Grayson County
- Wax
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Wax have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wax
- Wax is located in Grayson County
- Lines Mill
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Lines Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lines Mill
- Lines Mill is located in Hart County
- Priceville
(9 miles [14.5 km] to the southeast)
- Jump to our Gazetteer entry for Priceville
- Priceville is located in Hart County
- Stephensburg
(9 miles [14.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Stephensburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Stephensburg
- Stephensburg is located in Hardin County
- Limp
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Limp have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Limp
- Limp is located in Hardin County
- Upton
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Upton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Upton
- Upton is located in Hardin County
- Population from the 2020 Census: 691 people
- Jump to TripAdvisor's Tourism page for Upton <4>
- Sonora
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Sonora have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sonora
- Sonora is located in Hardin County
- Population from the 2020 Census: 523 people
- Jump to TripAdvisor's Tourism page for Sonora <4>
- Nolin
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Nolin. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Nolin
- Nolin is located in Hardin County
- Dogcreek
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Dogcreek
- Dogcreek is located in Hart County
- Leitchfield
(11 miles [17.7 km] to the west)
- Anneta
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Anneta have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anneta
- Anneta is located in Grayson County
- Cub Run
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Cub Run have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cub Run
- Cub Run is located in Hart County
- Jump to TripAdvisor's Tourism page for Cub Run <4>
- Bonnieville
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Bonnieville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bonnieville
- Bonnieville is located in Hart County
- Population from the 2020 Census: 260 people
- Jump to TripAdvisor's Tourism page for Bonnieville <4>
- Glendale
(12 miles [19.3 km] to the northeast)
- Hardin Springs
(12 miles [19.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Hardin Springs. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hardin Springs
- Hardin Springs is located in Hardin County
Off-the-Road Links ...
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Lacon, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|