Nearby Airports

Introduction ...

When we're on the road, rather than always picking an airport that is close to our destination, we try to see if there might be another airport that would better fit our travel plans.<1> To help with your planning, the following list of airports is organized by type and proximity to Kimper.

Please keep in mind that these airports were chosen based on their air-distance from Kimper. You should check the map and see how accessible they are when considering one airport over another.

For each of the airports listed below, we've linked to websites where detailed information about the airport can be found.

Of the airports that we know about, these are some of the closest to Kimper.

Large Airports ...

McGhee Tyson Airport (TYS/KTYS)
(147 miles [236.6 km] to the southwest)
- Official website: https://flyknoxville.com/
- Airport Identification Code:
  IATA: TYS ICAO: KTYS
- GPS Coordinates: 35.810972, -83.994028<2>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on McGhee Tyson Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for McGhee Tyson Airport
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to McGhee Tyson Airport
- From Kimper to McGhee Tyson Airport
Airborne Airpark (ILN/KILN)
(154 miles [247.8 km] to the north northwest)
- Airport Identification Code:
  IATA: ILN ICAO: KILN
- GPS Coordinates: 39.427920, -83.792119<3>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Airborne Airpark
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Airborne Airpark
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Airborne Airpark
- From Kimper to Airborne Airpark
Northern Kentucky Intl. (CVG/KCVG)
(165 miles [265.5 km] to the northwest)
- Official website: https://www.cvgairport.com/
- Airport Identification Code:
  IATA: CVG ICAO: KCVG
- GPS Coordinates: 39.048837, -84.667822<4>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Cincinnati / Northern Kentucky International Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Northern Kentucky Intl.
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Cincinnati / Northern Kentucky International
- From Kimper to Cincinnati / Northern Kentucky International
Port Columbus Intl. (CMH/KCMH)
(175 miles [281.6 km] to the north)
- Official website: https://columbusairports.com/
- Airport Identification Code:
  IATA: CMH ICAO: KCMH
- GPS Coordinates: 39.997972, -82.891889<5>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Port Columbus International Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Port Columbus Intl.
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Port Columbus International Airport
- From Kimper to Port Columbus International Airport
Continue List (3 more) ...
- Louisville Intl. (SDF/KSDF)
  (190 miles [305.8 km] to the west northwest)
  - Official website: https://www.flylouisville.com/
  - Airport Identification Code:
    IATA: SDF ICAO: KSDF
  - GPS Coordinates: 38.174086, -85.736499<6>
    (These coordinates were provided by the GNIS)
  - Jump to a Google Map centered on Louisville International Airport
  - Flight Tracking: [FlightAware]
  - From SkyVector:
    [Chart] [Terminal Procedures]
  - Current Airport Weather for Louisville Intl.
  - Additional airport information:
    [AirNav] [FlightAware]
  - Google driving directions:
  - From your current location to Louisville International Airport
  - From Kimper to Louisville International Airport
- Dayton Intl. (DAY/KDAY)
  (194 miles [312.2 km] to the north northwest)
  - Official website: www.flydayton.com/
  - Airport Identification Code:
    IATA: DAY ICAO: KDAY
  - GPS Coordinates: 39.902251, -84.219410<7>
    (These coordinates were provided by the FAA)
  - Jump to a Google Map centered on Dayton International Airport
  - Flight Tracking: [FlightAware]
  - From SkyVector:
    [Chart] [Terminal Procedures]
  - Current Airport Weather for Dayton Intl.
  - Additional airport information:
    [AirNav] [FlightAware]
  - Google driving directions:
  - From your current location to Dayton International
  - From Kimper to Dayton International
- Morgantown Muni. (MGW/KMGW)
  (197 miles [317 km] to the northeast)
  - Official website: https://www.morgantownairport.com/
  - Airport Identification Code:
    IATA: MGW ICAO: KMGW
  - GPS Coordinates: 39.642908, -79.916314<8>
    (These coordinates were provided by the GNIS)
  - Jump to a Google Map centered on Morgantown Municipal Airport
  - Flight Tracking: [FlightAware]
  - From SkyVector:
    [Chart] [Terminal Procedures]
  - Current Airport Weather for Morgantown Muni.
  - Additional airport information:
    [AirNav] [FlightAware]
  - Google driving directions:
  - From your current location to Morgantown Municipal
  - From Kimper to Morgantown Municipal

Smaller Airports with Scheduled Flights / Air Taxi Service ...

Tri-State Airport (HTS/KHTS)
(61 miles [98.2 km] to the north)
- Official website: https://www.tristateairport.com/
- Airport Identification Code:
  IATA: HTS ICAO: KHTS
- GPS Coordinates: 38.366667, -82.558028<9>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Tri-State Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Tri-State Airport
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Tri-State Airport
- From Kimper to Tri-State Airport
Raleigh County Meml. (BKW/KBKW)
(69 miles [111 km] to the east northeast)
- Official website: flybeckley.com/
- Airport Identification Code:
  IATA: BKW ICAO: KBKW
- GPS Coordinates: 37.787326, -81.124164<10>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Raleigh County Memorial Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Raleigh County Meml.
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Raleigh County Memorial
- From Kimper to Raleigh County Memorial
Tri-Cities Rgnl. (TRI/KTRI)
(70 miles [112.7 km] to the south)
- Official website: https://triflight.com/
- Airport Identification Code:
  IATA: TRI ICAO: KTRI
- GPS Coordinates: 36.475222, -82.407417<11>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Tri-Cities Regional Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Tri-Cities Rgnl.
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Tri-Cities Regional
- From Kimper to Tri-Cities Regional
Yeager Airport (CRW/KCRW)
(73 miles [117.5 km] to the north northeast)
- Official website: https://yeagerairport.com/
- Airport Identification Code:
  IATA: CRW ICAO: KCRW
- GPS Coordinates: 38.373139, -81.593194<12>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Yeager Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Yeager Airport
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Yeager Airport
- From Kimper to Yeager Airport
Greeneville Muni. (GCY/KGCY)
(93 miles [149.7 km] to the south southwest)
- Airport Identification Code:
  IATA: GCY ICAO: KGCY
- GPS Coordinates: 36.192991, -82.815070<13>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Greeneville - Greene County Municipal Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Greeneville Muni.
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Greeneville - Greene County Municipal
- From Kimper to Greeneville - Greene County Municipal
Greenbrier Valley Airport (LWB/KLWB)
(109 miles [175.4 km] to the east northeast)
- Official website: https://www.gvairport.com/
- Airport Identification Code:
  IATA: LWB ICAO: KLWB
- GPS Coordinates: 37.858306, -80.399472<14>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Greenbrier Valley Airport
- Flight Tracking: [FlightAware]
- From SkyVector:
  [Chart] [Terminal Procedures]
- Current Airport Weather for Greenbrier Valley Airport
- Additional airport information:
  [AirNav] [FlightAware]
- Google driving directions:
- From your current location to Greenbrier Valley
- From Kimper to Greenbrier Valley

General Aviation Airports ...

Belcher Rgnl. (FAA ID: 57KY)
(8 miles [12.9 km] to the south)
- GPS Coordinates: 37.369444, -82.324167<15>
  (These coordinates were provided by the FAA)
- Jump to a Google Map centered on Belcher Regional Airport
- Current Airport Weather for Belcher Rgnl.
- Google driving directions:
- From your current location to Belcher Regional
- From Kimper to Belcher Regional
Pike Co. Airport (FAA ID: PBX)
(12 miles [19.3 km] to the west northwest)
- GPS Coordinates: 37.561764, -82.566389<16>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Pike County Airport
- Current Airport Weather for Pike Co. Airport
- Google driving directions:
- From your current location to Pike County Airport
- From Kimper to Pike County Airport
Mingo Co. Airport (FAA ID: 4I0)
(13 miles [20.9 km] to the north northeast)
- GPS Coordinates: 37.687601, -82.260973<17>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Mingo County Airport
- Current Airport Weather for Mingo Co. Airport
- Google driving directions:
- From your current location to Mingo County Airport
- From Kimper to Mingo County Airport
Grundy Muni. (FAA ID: GDY)
(22 miles [35.4 km] to the southeast)
- GPS Coordinates: 37.232393, -82.124997<18>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Grundy Municipal Airport
- Current Airport Weather for Grundy Muni.
- Google driving directions:
- From your current location to Grundy Municipal
- From Kimper to Grundy Municipal
Big Sandy Rgnl. (FAA ID: K22)
(23 miles [37 km] to the northwest)
- Official website: https://www.bigsandyregional.com/
- GPS Coordinates: 37.751028, -82.636694<19>
  (These coordinates were provided by the GNIS)
- Jump to a Google Map centered on Big Sandy Regional Airport
- Current Airport Weather for Big Sandy Rgnl.
- Google driving directions:
- From your current location to Big Sandy Regional
- From Kimper to Big Sandy Regional

Footnotes ...

<1>	When we are planning a trip (for example, to Kimper), we usually look for the obvious: the choice of airlines that fly into the airport, the number of flights, the connections we have to make, which car rentals are available, etc. We also look for sights and attractions that we might find between any given airport and our destination - we do love exploring. We're willing to fly into a more distant airport if we can get the services and amenities that we like. Even though our choice of airport might be inconvenient to others, it usually gives us a better trip.
<2>	GPS Coordinates for McGhee Tyson Airport: Decimal: 35.81097, -83.994028 DDMMSS: 35° 48' 39", -83° 59' 38"
<3>	GPS Coordinates for Airborne Airpark: Decimal: 39.42792, -83.792119 DDMMSS: 39° 25' 40", -83° 47' 31"
<4>	GPS Coordinates for Cincinnati / Northern Kentucky International Airport: Decimal: 39.04883, -84.667822 DDMMSS: 39° 2' 55", -84° 40' 4"
<5>	GPS Coordinates for Port Columbus International Airport: Decimal: 39.99797, -82.891889 DDMMSS: 39° 59' 52", -82° 53' 30"
<6>	GPS Coordinates for Louisville International Airport: Decimal: 38.17408, -85.736499 DDMMSS: 38° 10' 26", -85° 44' 11"
<7>	GPS Coordinates for Dayton International Airport: Decimal: 39.90225, -84.219410 DDMMSS: 39° 54' 8", -84° 13' 9"
<8>	GPS Coordinates for Morgantown Municipal Airport: Decimal: 39.64290, -79.916314 DDMMSS: 39° 38' 34", -79° 54' 58"
<9>	GPS Coordinates for Tri-State Airport: Decimal: 38.36666, -82.558028 DDMMSS: 38° 21' 59", -82° 33' 28"
<10>	GPS Coordinates for Raleigh County Memorial Airport: Decimal: 37.78732, -81.124164 DDMMSS: 37° 47' 14", -81° 7' 26"
<11>	GPS Coordinates for Tri-Cities Regional Airport: Decimal: 36.47522, -82.407417 DDMMSS: 36° 28' 30", -82° 24' 26"
<12>	GPS Coordinates for Yeager Airport: Decimal: 38.37313, -81.593194 DDMMSS: 38° 22' 23", -81° 35' 35"
<13>	GPS Coordinates for Greeneville - Greene County Municipal Airport: Decimal: 36.19299, -82.815070 DDMMSS: 36° 11' 34", -82° 48' 54"
<14>	GPS Coordinates for Greenbrier Valley Airport: Decimal: 37.85830, -80.399472 DDMMSS: 37° 51' 29", -80° 23' 58"
<15>	GPS Coordinates for Belcher Regional Airport: Decimal: 37.36944, -82.324167 DDMMSS: 37° 22' 9", -82° 19' 27"
<16>	GPS Coordinates for Pike County Airport: Decimal: 37.56176, -82.566389 DDMMSS: 37° 33' 42", -82° 33' 59"
<17>	GPS Coordinates for Mingo County Airport: Decimal: 37.68760, -82.260973 DDMMSS: 37° 41' 15", -82° 15' 39"
<18>	GPS Coordinates for Grundy Municipal Airport: Decimal: 37.23239, -82.124997 DDMMSS: 37° 13' 56", -82° 7' 29"
<19>	GPS Coordinates for Big Sandy Regional Airport: Decimal: 37.75102, -82.636694 DDMMSS: 37° 45' 3", -82° 38' 12"