RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Kentucky >> Washington County >> Jimtown >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Kentucky

The Commemorative Quarter for Kentucky





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Jimtown (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Jimtown. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Jimtown is located in Washington County.

To see how the shape of Kentucky's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Washington County: Anderson, Marion, Mercer & Nelson.

Below are the counties that are near Jimtown. For each of these counties, we show a sample of those communities that are closest to Jimtown:

  • Washington County     (The home county of Jimtown)
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Springfield
      (Less than 2 miles to the north)
      • Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Springfield
      • Springfield is located in Washington County
      • Population from the 2020 Census: 2,987 people
      • Jump to TripAdvisor's Tourism page for Springfield <2>
    • Saint Catharine
      (3 miles [4.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Saint Catharine have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Catharine
      • Saint Catharine is located in Washington County
    • Thompsonville
      (5 miles [8 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Thompsonville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Thompsonville
      • Thompsonville is located in Washington County
    • Litsey
      (6 miles [9.7 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Litsey. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Litsey
      • Litsey is located in Washington County
    • Mooresville
      (9 miles [14.5 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Mooresville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Mooresville
      • Mooresville is located in Washington County
    • Mackville
      (9 miles [14.5 km] to the northeast)
      • Jump to our Gazetteer entry for Mackville
      • Mackville is located in Washington County
      • Population from the 2020 Census: 224 people
    • Booker
      (9 miles [14.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Booker. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Booker
      • Booker is located in Washington County
    • Fredericktown
      (9 miles [14.5 km] to the northwest)
      • Jump to our Gazetteer entry for Fredericktown
      • Fredericktown is located in Washington County
    • Jenkinsville
      (10 miles [16.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Jenkinsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Jenkinsville
      • Jenkinsville is located in Washington County
    • Willisburg
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Willisburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Willisburg
      • Willisburg is located in Washington County
      • Population from the 2020 Census: 282 people
      • Jump to TripAdvisor's Tourism page for Willisburg <2>
    • Brush Grove
      (12 miles [19.3 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Brush Grove. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Brush Grove
      • Brush Grove is located in Washington County
    • Pulliam
      (12 miles [19.3 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Pulliam. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Pulliam
      • Pulliam is located in Washington County
    • Sharpsville
      (14 miles [22.5 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Sharpsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sharpsville
      • Sharpsville is located in Washington County
  • Adair County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Feathersburg
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Feathersburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Feathersburg
      • Feathersburg is located in Adair County
    • Speck
      (25 miles [40.2 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Speck. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Speck
      • Speck is located in Adair County
    • Casey Creek
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Casey Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Casey Creek
      • Casey Creek is located in Adair County
    • Knifley
      (29 miles [46.7 km] to the south)
      • Jump to our Gazetteer entry for Knifley
      • Knifley is located in Adair County
    • Barnett Springs
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Barnett Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Barnett Springs
      • Barnett Springs is located in Adair County
  • Anderson County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Sparrow
      (17 miles [27.4 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Sparrow. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sparrow
      • Sparrow is located in Anderson County
    • Ashbrook
      (20 miles [32.2 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Ashbrook. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Ashbrook
      • Ashbrook is located in Anderson County
    • Van Buren
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Van Buren
      • Van Buren is located in Anderson County
    • Sinai
      (22 miles [35.4 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Sinai. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sinai
      • Sinai is located in Anderson County
    • Glensboro
      (24 miles [38.6 km] to the north)
      • Jump to our Gazetteer entry for Glensboro
      • Glensboro is located in Anderson County
    • Anderson City
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Anderson City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Anderson City
      • Anderson City is located in Anderson County
    • Fox Creek
      (25 miles [40.2 km] to the northeast)
      • Jump to our Gazetteer entry for Fox Creek
      • Fox Creek is located in Anderson County
    • Birdie
      (27 miles [43.5 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Birdie. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Birdie
      • Birdie is located in Anderson County
    • McBrayer
      (27 miles [43.5 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for McBrayer. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for McBrayer
      • McBrayer is located in Anderson County
    • Lawrenceburg
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Lawrenceburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lawrenceburg
      • Lawrenceburg is located in Anderson County
      • Population from the 2020 Census: 11,529 people
      • Jump to TripAdvisor's Tourism page for Lawrenceburg <2>
  • Boyle County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Craintown
      (10 miles [16.1 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Craintown. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Craintown
      • Craintown is located in Boyle County
    • Aliceton
      (11 miles [17.7 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Aliceton. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Aliceton
      • Aliceton is located in Boyle County
    • Brumfield
      (13 miles [20.9 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Brumfield. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Brumfield
      • Brumfield is located in Boyle County
    • Mitchellsburg
      (14 miles [22.5 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Mitchellsburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Mitchellsburg
      • Mitchellsburg is located in Boyle County
    • Perryville
      (14 miles [22.5 km] to the east)
    • Forkland
      (14 miles [22.5 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Forkland. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Forkland
      • Forkland is located in Boyle County
    • Needmore
      (18 miles [29 km] to the east)
      • Note: The GPS coordinates that we are using for Needmore have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Needmore
      • Needmore is located in Boyle County
    • Parksville
      (18 miles [29 km] to the east)
    • Wilsonville
      (18 miles [29 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Wilsonville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Wilsonville
      • Wilsonville is located in Boyle County
    • Atoka
      (19 miles [30.6 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Atoka. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Atoka
      • Atoka is located in Boyle County
    • Alum Springs
      (20 miles [32.2 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Alum Springs. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Alum Springs
      • Alum Springs is located in Boyle County
    • Davis Hill
      (20 miles [32.2 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Davis Hill. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Davis Hill
      • Davis Hill is located in Boyle County
    • West Danville
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for West Danville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Danville
      • West Danville is located in Boyle County
  • Bullitt County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Lotus
      (27 miles [43.5 km] to the northwest)
      • Jump to our Gazetteer entry for Lotus
      • Lotus is located in Bullitt County
    • Solitude
      (27 miles [43.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Solitude. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Solitude
      • Solitude is located in Bullitt County
    • Clermont
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Clermont have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clermont
      • Clermont is located in Bullitt County
      • Jump to TripAdvisor's Tourism page for Clermont <2>
    • Lebanon Junction
      (30 miles [48.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Lebanon Junction. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Lebanon Junction
      • Lebanon Junction is located in Bullitt County
      • Population from the 2020 Census: 1,970 people
      • Jump to TripAdvisor's Tourism page for Lebanon Junction <2>
  • Casey County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Butchertown
      (20 miles [32.2 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Butchertown. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Butchertown
      • Butchertown is located in Casey County
    • Atterson
      (24 miles [38.6 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Atterson. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Atterson
      • Atterson is located in Casey County
    • Liberty
      (28 miles [45.1 km] to the southeast)
    • Creston
      (29 miles [46.7 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Creston. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Creston
      • Creston is located in Casey County
    • Rheber
      (30 miles [48.3 km] to the south)
      • Jump to our Gazetteer entry for Rheber
      • Rheber is located in Casey County
    • Middleburg
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Middleburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Middleburg
      • Middleburg is located in Casey County
    • Yosemite
      (30 miles [48.3 km] to the southeast)
  • Garrard County
    • Bryantsville
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Bryantsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bryantsville
      • Bryantsville is located in Garrard County
      • Jump to TripAdvisor's Tourism page for Bryantsville <2>
  • Green County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Allendale
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Allendale
      • Allendale is located in Green County
    • Summersville
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Summersville
      • Summersville is located in Green County
  • Hardin County
    • Younger Creek
      (28 miles [45.1 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Younger Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Younger Creek
      • Younger Creek is located in Hardin County
  • Jessamine County
    • High Bridge
      (28 miles [45.1 km] to the east)
      • Jump to our Gazetteer entry for High Bridge
      • High Bridge is located in Jessamine County
  • Larue County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Gleanings
      (19 miles [30.6 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Gleanings. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Gleanings
      • Gleanings is located in Larue County
    • White City ‑ Historic
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for White City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White City
      • White City is located in Larue County
    • Roanoke
      (27 miles [43.5 km] to the west)
      • Jump to our Gazetteer entry for Roanoke
      • Roanoke is located in Larue County
    • Buffalo
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Buffalo have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Buffalo
      • Buffalo is located in Larue County
    • Mount Sherman
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Mount Sherman
      • Mount Sherman is located in Larue County
    • Hodgenville
      (29 miles [46.7 km] to the west)
  • Lincoln County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Milledgeville
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Milledgeville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Milledgeville
      • Milledgeville is located in Lincoln County
    • Moreland
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Moreland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Moreland
      • Moreland is located in Lincoln County
    • Hustonville
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Hustonville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hustonville
      • Hustonville is located in Lincoln County
      • Population from the 2020 Census: 368 people
      • Jump to TripAdvisor's Tourism page for Hustonville <2>
    • Chicken Bristle
      (27 miles [43.5 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Chicken Bristle. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Chicken Bristle
      • Chicken Bristle is located in Lincoln County
    • McKinney
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for McKinney have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McKinney
      • McKinney is located in Lincoln County
      • Jump to TripAdvisor's Tourism page for McKinney <2>
    • Mount Salem
      (28 miles [45.1 km] to the southeast)
      • Jump to our Gazetteer entry for Mount Salem
      • Mount Salem is located in Lincoln County
    • Turnersville
      (28 miles [45.1 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Turnersville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Turnersville
      • Turnersville is located in Lincoln County
    • Geneva
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Geneva have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Geneva
      • Geneva is located in Lincoln County
    • Boneyville
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Boneyville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Boneyville
      • Boneyville is located in Lincoln County
    • Hubble
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Hubble have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hubble
      • Hubble is located in Lincoln County
    • Blue Lick
      (30 miles [48.3 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Blue Lick. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Blue Lick
      • Blue Lick is located in Lincoln County
    • New Salem
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for New Salem have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Salem
      • New Salem is located in Lincoln County
  • Marion County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Simstown
      (2 miles [3.2 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Simstown. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Simstown
      • Simstown is located in Marion County
    • Poplar Corner
      (5 miles [8 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Poplar Corner. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Poplar Corner
      • Poplar Corner is located in Marion County
    • Lebanon
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lebanon
      • Lebanon is located in Marion County
      • Population from the 2020 Census: 5,733 people
      • Jump to TripAdvisor's Tourism page for Lebanon <2>
    • Penick
      (7 miles [11.3 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Penick. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Penick
      • Penick is located in Marion County
    • Burkes Spring
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for Burkes Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burkes Spring
      • Burkes Spring is located in Marion County
    • Riley
      (9 miles [14.5 km] to the southeast)
      • Jump to our Gazetteer entry for Riley
      • Riley is located in Marion County
    • Saint Mary
      (9 miles [14.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Saint Mary have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Mary
      • Saint Mary is located in Marion County
      • Jump to TripAdvisor's Tourism page for Saint Mary <2>
    • Gandertown
      (9 miles [14.5 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Gandertown. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Gandertown
      • Gandertown is located in Marion County
    • Gravel Switch
      (10 miles [16.1 km] to the southeast)
      • Jump to our Gazetteer entry for Gravel Switch
      • Gravel Switch is located in Marion County
    • Belltown
      (10 miles [16.1 km] to the southwest)
      • Jump to our Gazetteer entry for Belltown
      • Belltown is located in Marion County
    • Frogtown
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Frogtown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Frogtown
      • Frogtown is located in Marion County
    • Loretto
      (10 miles [16.1 km] to the west)
      • Note: The GPS coordinates that we are using for Loretto have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Loretto
      • Loretto is located in Marion County
      • Population from the 2020 Census: 692 people
      • Jump to TripAdvisor's Tourism page for Loretto <2>
    • Nerinx
      (10 miles [16.1 km] to the west)
      • Note: The GPS coordinates that we are using for Nerinx have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nerinx
      • Nerinx is located in Marion County
  • Mercer County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Stewart
      (11 miles [17.7 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Stewart. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Stewart
      • Stewart is located in Mercer County
    • Dixville
      (14 miles [22.5 km] to the east)
      • Jump to our Gazetteer entry for Dixville
      • Dixville is located in Mercer County
    • Nevada
      (16 miles [25.7 km] to the east)
      • Jump to our Gazetteer entry for Nevada
      • Nevada is located in Mercer County
    • Duncan
      (17 miles [27.4 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Duncan. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Duncan
      • Duncan is located in Mercer County
    • Tablow
      (17 miles [27.4 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Tablow. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Tablow
      • Tablow is located in Mercer County
    • Harrodsburg
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Harrodsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harrodsburg
      • Harrodsburg is located in Mercer County
      • Population from the 2020 Census: 8,544 people
      • Jump to TripAdvisor's Tourism page for Harrodsburg <2>
    • Mayo
      (20 miles [32.2 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Mayo. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Mayo
      • Mayo is located in Mercer County
    • Jackson
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Jackson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jackson
      • Jackson is located in Mercer County
    • McAfee
      (23 miles [37 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for McAfee. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for McAfee
      • McAfee is located in Mercer County
    • Vanarsdell
      (23 miles [37 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Vanarsdell. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Vanarsdell
      • Vanarsdell is located in Mercer County
    • Burgin
      (24 miles [38.6 km] to the east)
    • Braxton
      (25 miles [40.2 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Braxton. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Braxton
      • Braxton is located in Mercer County
    • Salvisa
      (25 miles [40.2 km] to the northeast)
  • Montgomery County
    • Hedgeville
      (28 miles [45.1 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Hedgeville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Hedgeville
      • Hedgeville is located in Montgomery County
      • Hedgeville has also been known as:
      • Hedges
  • Nelson County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Botland
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Botland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Botland
      • Botland is located in Nelson County
    • Woodlawn
      (13 miles [20.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Woodlawn have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodlawn
      • Woodlawn is located in Nelson County
    • Greenbrier
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for Greenbrier have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Greenbrier
      • Greenbrier is located in Nelson County
    • Chaplin
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Chaplin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chaplin
      • Chaplin is located in Nelson County
      • Jump to TripAdvisor's Tourism page for Chaplin <2>
    • East Bardstown
      (15 miles [24.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for East Bardstown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Bardstown
      • East Bardstown is located in Nelson County
    • Balltown
      (16 miles [25.7 km] to the west)
      • Note: The GPS coordinates that we are using for Balltown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Balltown
      • Balltown is located in Nelson County
    • New Hope
      (16 miles [25.7 km] to the west)
      • Jump to our Gazetteer entry for New Hope
      • New Hope is located in Nelson County
    • Bloomfield
      (17 miles [27.4 km] to the north)
    • Bardstown
      (17 miles [27.4 km] to the northwest)
    • Culvertown
      (17 miles [27.4 km] to the west)
      • Note: The GPS coordinates that we are using for Culvertown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Culvertown
      • Culvertown is located in Nelson County
    • Nazareth
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Nazareth have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nazareth
      • Nazareth is located in Nelson County
    • Withrow
      (18 miles [29 km] to the northwest)
      • Jump to our Gazetteer entry for Withrow
      • Withrow is located in Nelson County
    • Gethsemane
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for Gethsemane have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gethsemane
      • Gethsemane is located in Nelson County
  • Shelby County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Harrisonville
      (29 miles [46.7 km] to the north)
      • Jump to our Gazetteer entry for Harrisonville
      • Harrisonville is located in Shelby County
    • Figgs
      (30 miles [48.3 km] to the north)
      • Jump to our Gazetteer entry for Figgs
      • Figgs is located in Shelby County
    • Southville
      (30 miles [48.3 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Southville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Southville
      • Southville is located in Shelby County
  • Spencer County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Wakefield
      (21 miles [33.8 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Wakefield. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Wakefield
      • Wakefield is located in Spencer County
    • Mount Eden
      (26 miles [41.8 km] to the north)
      • Jump to our Gazetteer entry for Mount Eden
      • Mount Eden is located in Spencer County
    • Taylorsville
      (26 miles [41.8 km] to the north)
    • Little Mount
      (27 miles [43.5 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Little Mount. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Little Mount
      • Little Mount is located in Spencer County
    • Yoder
      (27 miles [43.5 km] to the north)
      • Jump to our Gazetteer entry for Yoder
      • Yoder is located in Spencer County
    • Normandy
      (30 miles [48.3 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Normandy. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Normandy
      • Normandy is located in Spencer County
  • Taylor County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Mannsville
      (20 miles [32.2 km] to the south)
      • Note: The GPS coordinates that we are using for Mannsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mannsville
      • Mannsville is located in Taylor County
    • Saloma
      (20 miles [32.2 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Saloma. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Saloma
      • Saloma is located in Taylor County
    • Maple
      (21 miles [33.8 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Maple. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Maple
      • Maple is located in Taylor County
    • Acton
      (22 miles [35.4 km] to the south)
      • Jump to our Gazetteer entry for Acton
      • Acton is located in Taylor County
    • Campbellsville
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Campbellsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Campbellsville
      • Campbellsville is located in Taylor County
      • Population from the 2020 Census: 11,430 people
      • Jump to TripAdvisor's Tourism page for Campbellsville <2>
    • Elk Horn
      (24 miles [38.6 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Elk Horn. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Elk Horn
      • Elk Horn is located in Taylor County
      • Jump to TripAdvisor's Tourism page for Elk Horn <2>
    • Bengal
      (25 miles [40.2 km] to the southwest)
      • Jump to our Gazetteer entry for Bengal
      • Bengal is located in Taylor County
    • Wright's
      (26 miles [41.8 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Wright's. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Wright's
      • Wright's is located in Taylor County
  • Woodford County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Mundys Landing
      (27 miles [43.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Mundys Landing have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mundys Landing
      • Mundys Landing is located in Woodford County
    • Nonesuch
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Nonesuch have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nonesuch
      • Nonesuch is located in Woodford County

For an expanded list of the communities that are closest to Jimtown, see our County-by-County Page for Jimtown.

Cemeteries Near Jimtown ...

Below are cemeteries that are in the vicinity of Jimtown.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Jimtown covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Jimtown, with the one closest to Jimtown listed first.

  • Cemetery Hill Cemetery
    (Less than 2 miles to the northwest)
  • St. Dominics Cemetery
    (2 miles [3.2 km] to the northwest)
    • Jump to our Gazetteer entry for the St. Dominics Cemetery
    • Note: The GPS coordinates that we are using for the St. Dominics Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • St. Ivos Cemetery
    (3 miles [4.8 km] to the southeast)
    • Jump to our Gazetteer entry for the St. Ivos Cemetery
    • Note: The GPS coordinates that we are using for the St. Ivos Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Keene Cemetery
    (3 miles [4.8 km] to the north)
    • Jump to our Gazetteer entry for the Keene Cemetery
    • Note: The GPS coordinates that we are using for the Keene Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • St. Rose Cemetery
    (3 miles [4.8 km] to the northwest)
  • Ryder Cemetery
    (6 miles [9.7 km] to the south)
    • Jump to our Gazetteer entry for the Ryder Cemetery
    • Note: The GPS coordinates that we are using for the Ryder Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Hall Cemetery
    (6 miles [9.7 km] to the northeast)
    • Jump to our Gazetteer entry for the Hall Cemetery
    • Note: The GPS coordinates that we are using for the Hall Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Pleasant Grove Church Cemetery
    (6 miles [9.7 km] to the north)
    • Jump to our Gazetteer entry for the Pleasant Grove Church Cemetery
    • Note: The GPS coordinates that we are using for the Pleasant Grove Church Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • St. Agustines Cemetery
    (7 miles [11.3 km] to the southwest)
    • Jump to our Gazetteer entry for the St. Agustines Cemetery
    • Note: The GPS coordinates that we are using for the St. Agustines Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Cocanougher Cemetery
    (7 miles [11.3 km] to the east)
    • Jump to our Gazetteer entry for the Cocanougher Cemetery
    • Note: The GPS coordinates that we are using for the Cocanougher Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Young Cemetery
    (7 miles [11.3 km] to the east)
    • Jump to our Gazetteer entry for the Young Cemetery
    • Note: The GPS coordinates that we are using for the Young Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Russell Cemetery
    (7 miles [11.3 km] to the east)
    • Jump to our Gazetteer entry for the Russell Cemetery
    • Note: The GPS coordinates that we are using for the Russell Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (290 more) ...
    • Lebanon National Cemetery
      (8 miles [12.9 km] to the south)
    • Holderman Cemetery
      (8 miles [12.9 km] to the east)
      • Jump to our Gazetteer entry for the Holderman Cemetery
      • Note: The GPS coordinates that we are using for the Holderman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • St. Charles Cemetery
      (9 miles [14.5 km] to the southwest)
      • Jump to our Gazetteer entry for the St. Charles Cemetery
      • Note: The GPS coordinates that we are using for the St. Charles Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Jimtown in the Atlas, the following 1895 communities would have been found near the current location of Jimtown.

These communities are listed based on their distance from Jimtown, with the one closest to Jimtown listed first.

  • Springfield
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Springfield
    • Springfield is located in Washington County
    • Population from the 2020 Census: 2,987 people
    • Jump to TripAdvisor's Tourism page for Springfield <2>
  • Texas
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Texas have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Texas
    • Texas is located in Washington County
  • Valley Hill
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Valley Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Valley Hill
    • Valley Hill is located in Washington County
  • Lebanon
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lebanon
    • Lebanon is located in Marion County
    • Population from the 2020 Census: 5,733 people
    • Jump to TripAdvisor's Tourism page for Lebanon <2>
  • Penick
    (7 miles [11.3 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Penick. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Penick
    • Penick is located in Marion County
  • Mooresville
    (9 miles [14.5 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Mooresville. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Mooresville
    • Mooresville is located in Washington County
  • Riley
    (9 miles [14.5 km] to the southeast)
    • Jump to our Gazetteer entry for Riley
    • Riley is located in Marion County
  • Mackville
    (9 miles [14.5 km] to the northeast)
    • Jump to our Gazetteer entry for Mackville
    • Mackville is located in Washington County
    • Population from the 2020 Census: 224 people
  • Booker
    (9 miles [14.5 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Booker. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Booker
    • Booker is located in Washington County
  • Fredericktown
    (9 miles [14.5 km] to the northwest)
    • Jump to our Gazetteer entry for Fredericktown
    • Fredericktown is located in Washington County
  • Loretto
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Loretto have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Loretto
    • Loretto is located in Marion County
    • Population from the 2020 Census: 692 people
    • Jump to TripAdvisor's Tourism page for Loretto <2>
  • Gravel Switch
    (10 miles [16.1 km] to the southeast)
    • Jump to our Gazetteer entry for Gravel Switch
    • Gravel Switch is located in Marion County
  • Continue List   (18 more) ...
    • Willisburg
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Willisburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Willisburg
      • Willisburg is located in Washington County
      • Population from the 2020 Census: 282 people
      • Jump to TripAdvisor's Tourism page for Willisburg <2>
    • Polin
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for Polin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Polin
      • Polin is located in Washington County
    • Calvary
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Calvary have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Calvary
      • Calvary is located in Marion County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Jimtown. See our List of 1890's Communities around Jimtown.

Newspapers Published in Jimtown ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 102 newspapers that have been published in the area around Jimtown.

Although we're unaware of any newspapers that were published in the immediate area of Jimtown, there are papers which were published within 23 miles [37 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Jimtown.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Jimtown:

Unfortunately, we don't know of a website for Jimtown. If you can help, please contact us through our Feedback Page.

The official website for State of Kentucky: https://kentucky.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Jimtown, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Jimtown) to Point B.Our distance measurements begin at a specific point in Jimtown. The point we use is located at these GPS coordinates - Latitude: 37.6698, Longitude: -85.2094       In this case, the coordinates for Jimtown have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025