|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Glendale Junction in the Atlas, the following communities of the 1890's would have been found near the current location of Glendale Junction. The following communities are listed based on their distance, with the one closest to Glendale Junction listed first.
- Glendale
(2 miles [3.2 km] to the west)
- Nolin
(3 miles [4.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Nolin. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Nolin
- Nolin is located in Hardin County
- Google driving directions:
- From your current location to Nolin
- From Glendale Junction to Nolin
- Tonieville
(3 miles [4.8 km] to the east)
- Sonora
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Sonora have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sonora
- Sonora is located in Hardin County
- Population from the 2020 Census: 523 people
- Jump to TripAdvisor's Tourism page for Sonora <2>
- Hodgenville
(6 miles [9.7 km] to the east)
- Elizabethtown
(7 miles [11.3 km] to the north)
- Cecilia
(7 miles [11.3 km] to the northwest)
- Stephensburg
(8 miles [12.9 km] to the west)
- White Mills
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for White Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Mills
- White Mills is located in Hardin County
- Upton
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Upton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Upton
- Upton is located in Hardin County
- Population from the 2020 Census: 691 people
- Jump to TripAdvisor's Tourism page for Upton <2>
- Tunnel Hills
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Tunnel Hills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tunnel Hills
- Tunnel Hills is located in Hardin County
- Saint John
(9 miles [14.5 km] to the northwest)
- Melrose
(10 miles [16.1 km] to the southwest)
- Buffalo
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Buffalo have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Larue County
- Roanoke
(10 miles [16.1 km] to the northeast)
- Hammonville
(12 miles [19.3 km] to the south)
- Magnolia
(12 miles [19.3 km] to the southeast)
- Rineyville
(12 miles [19.3 km] to the northwest)
- Summit
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Summit. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Summit
- Summit is located in Hardin County
- Google driving directions:
- From your current location to Summit
- From Glendale Junction to Summit
- Howe Valley
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Howe Valley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howe Valley
- Howe Valley is located in Hardin County
- Millerstown
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Millerstown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millerstown
- Millerstown is located in Grayson County
- Mount Sherman
(14 miles [22.5 km] to the southeast)
- Colesburg
(14 miles [22.5 km] to the north)
- Bonnieville
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Bonnieville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bonnieville
- Bonnieville is located in Hart County
- Population from the 2020 Census: 260 people
- Jump to TripAdvisor's Tourism page for Bonnieville <2>
- Pike View
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Pike View have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pike View
- Pike View is located in Hart County
- New Haven
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for New Haven have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Haven
- New Haven is located in Nelson County
- Population from the 2020 Census: 900 people
- Jump to TripAdvisor's Tourism page for New Haven <2>
- Nelsonville
(15 miles [24.1 km] to the northeast)
Off-the-Road Links ...
The official website for Hardin County: www.hcky.org/ The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Glendale Junction, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|