|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Emerson in the Atlas, the following communities of the 1890's would have been found near the current location of Emerson. The following communities are listed based on their distance, with the one closest to Emerson listed first.
- Smoky Valley
(2 miles [3.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Smoky Valley. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Smoky Valley
- Smoky Valley is located in Carter County
- Olive Hill
(5 miles [8 km] to the southeast)
- Wesleyville
(5 miles [8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Wesleyville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Wesleyville
- Wesleyville is located in Carter County
- Enterprise
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Enterprise have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Enterprise
- Enterprise is located in Carter County
- Lawton
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for Lawton
- Lawton is located in Carter County
- Limestone
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Limestone have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Limestone
- Limestone is located in Carter County
- Soldier
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Soldier have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Soldier
- Soldier is located in Carter County
- Counts Crossroads
(7 miles [11.3 km] to the east)
- Jump to our Gazetteer entry for Counts Crossroads
- Counts Crossroads is located in Carter County
- Triplett
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Triplett have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Triplett
- Triplett is located in Rowan County
- Jacobs
(8 miles [12.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Jacobs. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Jacobs
- Jacobs is located in Carter County
- Mountain Top
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Mountain Top. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Mountain Top
- Mountain Top is located in Carter County
- Smiths Creek
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Smiths Creek have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smiths Creek
- Smiths Creek is located in Carter County
- Rugless
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Rugless have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rugless
- Rugless is located in Lewis County
- Gates
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Gates. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Gates
- Gates is located in Rowan County
- Grahn
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Grahn have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grahn
- Grahn is located in Carter County
- Elliottville
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Elliottville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elliottville
- Elliottville is located in Rowan County
- Gimlet
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Gimlet
- Gimlet is located in Elliott County
- Aden
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Aden have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aden
- Aden is located in Carter County
- Charlotte Furnace
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Charlotte Furnace have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Charlotte Furnace
- Charlotte Furnace is located in Carter County
- Crum
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Crum have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crum
- Crum is located in Lewis County
- Ryan
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Ryan. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Ryan
- Ryan is located in Fleming County
- Rodburn
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Rodburn have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rodburn
- Rodburn is located in Rowan County
- Stark
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Stark have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stark
- Stark is located in Elliott County
- Fultz
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Fultz have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fultz
- Fultz is located in Carter County
- Tannery
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Tannery have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tannery
- Tannery is located in Lewis County
Off-the-Road Links ...
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Emerson, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|