|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Elmville had a post office and no railroad service.
The following communities are listed based on their distance from Elmville, with the one closest to Elmville listed first.
- Harmony
(2 miles [3.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Harmony. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Harmony
- Harmony is located in Owen County
- Google driving directions:
- From your current location to Harmony
- From Elmville to Harmony
- Tacketts Mill
(2 miles [3.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Tacketts Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tacketts Mill
- Tacketts Mill is located in Owen County
- Minorsville
(3 miles [4.8 km] to the east)
- Peaks Mill
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Peaks Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peaks Mill
- Peaks Mill is located in Franklin County
- Beechwood
(4 miles [6.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Beechwood. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Beechwood
- Beechwood is located in Owen County
- Google driving directions:
- From your current location to Beechwood
- From Elmville to Beechwood
- Longlick
(5 miles [8 km] to the east)
- Switzer
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Switzer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Switzer
- Switzer is located in Franklin County
- Stamping Ground
(6 miles [9.7 km] to the southeast)
- Skinnersburg
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Skinnersburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Skinnersburg
- Skinnersburg is located in Scott County
- Rockdale
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Rockdale. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rockdale
- Rockdale is located in Owen County
- Google driving directions:
- From your current location to Rockdale
- From Elmville to Rockdale
- Polsgrove
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Polsgrove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Polsgrove
- Polsgrove is located in Franklin County
- Josephine
(7 miles [11.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Josephine. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Josephine
- Josephine is located in Scott County
- Google driving directions:
- From your current location to Josephine
- From Elmville to Josephine
- Forks of Elkhorn
(8 miles [12.9 km] to the south)
- Biddle
(8 miles [12.9 km] to the east)
- Porter
(8 miles [12.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Porter. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Porter
- Porter is located in Scott County
- Google driving directions:
- From your current location to Porter
- From Elmville to Porter
- Monterey
(8 miles [12.9 km] to the northwest)
- Gest
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Gest have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gest
- Gest is located in Henry County
- Hesler
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Hesler have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hesler
- Hesler is located in Owen County
- Woodlake
(9 miles [14.5 km] to the south)
- White Sulphur
(9 miles [14.5 km] to the south)
- Duval
(9 miles [14.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Duval. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Duval
- Duval is located in Scott County
- Google driving directions:
- From your current location to Duval
- From Elmville to Duval
- Harvieland
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Harvieland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harvieland
- Harvieland is located in Franklin County
- New Columbus
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for New Columbus have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Columbus
- New Columbus is located in Owen County
- Breck
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Breck. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Breck
- Breck is located in Owen County
- Google driving directions:
- From your current location to Breck
- From Elmville to Breck
- Frankfort
(11 miles [17.7 km] to the southwest)
- Jett
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Jett have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jett
- Jett is located in Franklin County
- Hallam
(11 miles [17.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hallam. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Hallam
- Hallam is located in Owen County
- Google driving directions:
- From your current location to Hallam
- From Elmville to Hallam
Off-the-Road Links ...
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Elmville, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|