|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Dyer in the Atlas, the following communities of the 1890's would have been found near the current location of Dyer. The following communities are listed based on their distance, with the one closest to Dyer listed first.
- Constantine
(2 miles [3.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Constantine. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Constantine
- Constantine is located in Breckinridge County
- Google driving directions:
- From your current location to Constantine
- From Dyer to Constantine
- Custer
(2 miles [3.2 km] to the northwest)
- Hudson
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Hudson have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hudson
- Hudson is located in Breckinridge County
- Buras
(5 miles [8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Buras. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Buras
- Buras is located in Breckinridge County
- Google driving directions:
- From your current location to Buras
- From Dyer to Buras
- Hardin Springs
(6 miles [9.7 km] to the south)
- Rosetta
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Rosetta have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rosetta
- Rosetta is located in Breckinridge County
- Limp
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Limp have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Limp
- Limp is located in Hardin County
- Howe Valley
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Howe Valley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howe Valley
- Howe Valley is located in Hardin County
- Big Spring
(7 miles [11.3 km] to the northeast)
- Garfield
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Garfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garfield
- Garfield is located in Breckinridge County
- Bewleyville
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Bewleyville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bewleyville
- Bewleyville is located in Breckinridge County
- Eveleigh
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Eveleigh have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eveleigh
- Eveleigh is located in Grayson County
- Harned
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Harned have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harned
- Harned is located in Breckinridge County
- Jump to TripAdvisor's Tourism page for Harned <3>
- Westview
(10 miles [16.1 km] to the west)
- Big Clifty
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Big Clifty have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Big Clifty
- Big Clifty is located in Grayson County
- Guston
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Guston have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Guston
- Guston is located in Meade County
- Irvington
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Irvington have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Irvington
- Irvington is located in Breckinridge County
- Population from the 2020 Census: 1,192 people
- Jump to TripAdvisor's Tourism page for Irvington <3>
- Summit
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Summit. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Summit
- Summit is located in Hardin County
- Google driving directions:
- From your current location to Summit
- From Dyer to Summit
- Stephensburg
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Stephensburg. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Stephensburg
- Stephensburg is located in Hardin County
- Google driving directions:
- From your current location to Stephensburg
- From Dyer to Stephensburg
- Flaherty
(12 miles [19.3 km] to the northeast)
- Hillgrove
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Hillgrove have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillgrove
- Hillgrove is located in Meade County
- McDaniels
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for McDaniels have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McDaniels
- McDaniels is located in Breckinridge County
- Jump to TripAdvisor's Tourism page for McDaniels <3>
- West Clifty
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for West Clifty have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Clifty
- West Clifty is located in Grayson County
- Saint John
(13 miles [20.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Saint John. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Saint John
- Saint John is located in Hardin County
- Google driving directions:
- From your current location to Saint John
- From Dyer to Saint John
- Rineyville
(13 miles [20.9 km] to the east)
Off-the-Road Links ...
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Dyer, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|