|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Valley Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Valley Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Valley Cemetery. We've listed the following communities based on their distance, with the closest first.
- Taylorsville
(Less than 2 miles to the east)
- Yoder
(2 miles [3.2 km] to the northeast)
- Jump to our Gazetteer entry for Yoder
- Yoder is located in Spencer County
- Normandy
(4 miles [6.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Normandy. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Normandy
- Normandy is located in Spencer County
- Wakefield
(5 miles [8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Wakefield. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Wakefield
- Wakefield is located in Spencer County
- Fairfield
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield
- Fairfield is located in Nelson County
- Population from the 2020 Census: 113 people
- Little Mount
(6 miles [9.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Little Mount. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Little Mount
- Little Mount is located in Spencer County
- Highgrove
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Highgrove have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Highgrove
- Highgrove is located in Nelson County
- Figgs
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Figgs
- Figgs is located in Shelby County
- Whitfield
(7 miles [11.3 km] to the northwest)
- Jump to our Gazetteer entry for Whitfield
- Whitfield is located in Bullitt County
- Bloomfield
(8 miles [12.9 km] to the south)
- Finchville
(8 miles [12.9 km] to the north)
- Jump to our Gazetteer entry for Finchville
- Finchville is located in Shelby County
- Solitude
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Solitude. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Solitude
- Solitude is located in Bullitt County
- Lenore
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Lenore. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lenore
- Lenore is located in Nelson County
- Coxs Creek
(10 miles [16.1 km] to the southwest)
- Mount Washington
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Mount Washington have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Washington
- Mount Washington is located in Bullitt County
- Population from the 2020 Census: 14,907 people
- Jump to TripAdvisor's Tourism page for Mount Washington <2>
- Chaplin
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Chaplin have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chaplin
- Chaplin is located in Nelson County
- Jump to TripAdvisor's Tourism page for Chaplin <2>
- Van Buren
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Anderson County
- Mount Eden
(11 miles [17.7 km] to the east)
- Jump to our Gazetteer entry for Mount Eden
- Mount Eden is located in Spencer County
- Southville
(11 miles [17.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Southville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Southville
- Southville is located in Shelby County
- Fisherville
(12 miles [19.3 km] to the northwest)
- Hopewell
(12 miles [19.3 km] to the northwest)
- Jump to our Gazetteer entry for Hopewell
- Hopewell is located in Jefferson County
- Samuels
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Samuels have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Samuels
- Samuels is located in Nelson County
- Hunters
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Hunters have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hunters
- Hunters is located in Nelson County
- Bourbon Springs
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Bourbon Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bourbon Springs
- Bourbon Springs is located in Nelson County
- Nazareth
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Nazareth have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nazareth
- Nazareth is located in Nelson County
- East Bardstown
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for East Bardstown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Bardstown
- East Bardstown is located in Nelson County
- Sparrow
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Sparrow. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sparrow
- Sparrow is located in Anderson County
- Simpsonville
(13 miles [20.9 km] to the north)
- Lincoln Ridge
(13 miles [20.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Lincoln Ridge. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lincoln Ridge
- Lincoln Ridge is located in Shelby County
Off-the-Road Links ...
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Valley Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.0298, Longitude: -85.3627 In this case, the coordinates for the Valley Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|