|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Spaw Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Spaw Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Spaw Cemetery. We've listed the following communities based on their distance, with the closest first.
- Ansel
(3 miles [4.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Ansel. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Ansel
- Ansel is located in Pulaski County
- Google driving directions:
- From your current location to Ansel
- From the Spaw Cemetery to Ansel
- Ware
(4 miles [6.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Ware. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Ware
- Ware is located in Casey County
- Google driving directions:
- From your current location to Ware
- From the Spaw Cemetery to Ware
- Mintonville
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Mintonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mintonville
- Mintonville is located in Casey County
- Nancy
(5 miles [8 km] to the south)
- Bethelridge
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Bethelridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethelridge
- Bethelridge is located in Casey County
- Science Hill
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Science Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Science Hill
- Science Hill is located in Pulaski County
- Population from the 2020 Census: 693 people
- Jump to TripAdvisor's Tourism page for Science Hill <4>
- Argyle
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Argyle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Argyle
- Argyle is located in Casey County
- Faubush
(7 miles [11.3 km] to the southwest)
- Somerset
(8 miles [12.9 km] to the southeast)
- Ferguson
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Ferguson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ferguson
- Ferguson is located in Pulaski County
- Population from the 2020 Census: 943 people
- Evona
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Evona have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evona
- Evona is located in Casey County
- Windsor
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Windsor have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Windsor
- Windsor is located in Casey County
- Jump to TripAdvisor's Tourism page for Windsor <4>
- Dabney
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Dabney. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Dabney
- Dabney is located in Pulaski County
- Google driving directions:
- From your current location to Dabney
- From the Spaw Cemetery to Dabney
- Eubank
(10 miles [16.1 km] to the northeast)
- Gilpin
(10 miles [16.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Gilpin. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Gilpin
- Gilpin is located in Casey County
- Google driving directions:
- From your current location to Gilpin
- From the Spaw Cemetery to Gilpin
- Vinnie
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Vinnie. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Vinnie
- Vinnie is located in Pulaski County
- Google driving directions:
- From your current location to Vinnie
- From the Spaw Cemetery to Vinnie
- Labascus
(11 miles [17.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Labascus. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Labascus
- Labascus is located in Casey County
- Google driving directions:
- From your current location to Labascus
- From the Spaw Cemetery to Labascus
- Teddy
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Teddy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Teddy
- Teddy is located in Casey County
- Honey Acre
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Honey Acre have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Honey Acre
- Honey Acre is located in Casey County
- Bronston
(12 miles [19.3 km] to the southeast)
- Grundy
(12 miles [19.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Grundy. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Grundy
- Grundy is located in Pulaski County
- Google driving directions:
- From your current location to Grundy
- From the Spaw Cemetery to Grundy
- Cantown
(12 miles [19.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Cantown. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Cantown
- Cantown is located in Casey County
- Google driving directions:
- From your current location to Cantown
- From the Spaw Cemetery to Cantown
- Phil
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Phil. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Phil
- Phil is located in Casey County
- Google driving directions:
- From your current location to Phil
- From the Spaw Cemetery to Phil
- Frazer
(13 miles [20.9 km] to the south)
- Burnside
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Burnside have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burnside
- Burnside is located in Pulaski County
- Population from the 2020 Census: 791 people
- Jump to TripAdvisor's Tourism page for Burnside <4>
- Coin
(13 miles [20.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Coin. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Coin
- Coin is located in Pulaski County
- Google driving directions:
- From your current location to Coin
- From the Spaw Cemetery to Coin
- Waynesburg
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Waynesburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waynesburg
- Waynesburg is located in Lincoln County
- Rubert Ford
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Rubert Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rubert Ford
- Rubert Ford is located in Casey County
Off-the-Road Links ...
The official website for Pulaski County: www.pulaskicountygovt.org/ The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Spaw Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.1489, Longitude: -84.7439 |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|