|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Milby Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Milby Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Milby Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Gabe
(Less than 2 miles to the east)
- Gabe is located in Green County
- Jump to our Gazetteer entry for Gabe
- Summersville
(3 miles [4.8 km] to the east)
- Summersville is located in Green County
- Jump to our Gazetteer entry for Summersville
- Allendale
(4 miles [6.4 km] to the north)
- Allendale is located in Green County
- Jump to our Gazetteer entry for Allendale
- Greensburg
(6 miles [9.7 km] to the southeast)
- Mac
(7 miles [11.3 km] to the northeast)
- Mac is located in Taylor County
- Jump to our Gazetteer entry for Mac
- Bengal
(8 miles [12.9 km] to the northeast)
- Bengal is located in Taylor County
- Jump to our Gazetteer entry for Bengal
- Pascal
(9 miles [14.5 km] to the southwest)
- Pascal is located in Hart County
- Jump to our Gazetteer entry for Pascal
- Rio
(9 miles [14.5 km] to the west)
- Rio is located in Hart County
- Jump to our Gazetteer entry for Rio
- Canmer
(9 miles [14.5 km] to the west)
- Canmer is located in Hart County
- Jump to our Gazetteer entry for Canmer
- Mount Sherman
(10 miles [16.1 km] to the north)
- Mount Sherman is located in Larue County
- Jump to our Gazetteer entry for Mount Sherman
- Roachville
(10 miles [16.1 km] to the southeast)
- Roachville is located in Green County
- Jump to our Gazetteer entry for Roachville
- Wright's
(10 miles [16.1 km] to the east)
- Wright's is located in Taylor County
- Jump to our Gazetteer entry for Wright's
- Hardyville
(11 miles [17.7 km] to the west)
- Hardyville is located in Hart County
- Jump to our Gazetteer entry for Hardyville
- Liletown
(11 miles [17.7 km] to the south)
- Liletown is located in Green County
- Jump to our Gazetteer entry for Liletown
- Exie
(11 miles [17.7 km] to the south)
- Exie is located in Green County
- Jump to our Gazetteer entry for Exie
- Maple
(11 miles [17.7 km] to the northeast)
- Maple is located in Taylor County
- Jump to our Gazetteer entry for Maple
- Bunnell Crossing
(12 miles [19.3 km] to the southwest)
- Bunnell Crossing is located in Hart County
- Jump to our Gazetteer entry for Bunnell Crossing
- Three Springs
(12 miles [19.3 km] to the southwest)
- Three Springs is located in Hart County
- Jump to our Gazetteer entry for Three Springs
- Center
(12 miles [19.3 km] to the southwest)
- Center is located in Metcalfe County
- Jump to our Gazetteer entry for Center
- Magnolia
(12 miles [19.3 km] to the northwest)
- Magnolia is located in Larue County
- Jump to our Gazetteer entry for Magnolia
- Saloma
(13 miles [20.9 km] to the northeast)
- Saloma is located in Taylor County
- Jump to our Gazetteer entry for Saloma
- Hammonville
(13 miles [20.9 km] to the northwest)
- Hammonville is located in Hart County
- Jump to our Gazetteer entry for Hammonville
- Pickett
(14 miles [22.5 km] to the southeast)
- Pickett is located in Adair County
- Jump to our Gazetteer entry for Pickett
- Kemp
(14 miles [22.5 km] to the southeast)
- Kemp is located in Adair County
- Jump to our Gazetteer entry for Kemp
- Buffalo
(14 miles [22.5 km] to the north)
- Buffalo is located in Larue County
- Jump to our Gazetteer entry for Buffalo
- Campbellsville
(14 miles [22.5 km] to the east)
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Milby Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|