Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the John A. Partin Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the John A. Partin Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the John A. Partin Cemetery (FG ID #75440). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the John A. Partin Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Frakes
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for Frakes
- Frakes is located in Bell County
- Pearl
(Less than 2 miles to the northwest)
- Note: The GPS coordinates that we are using for Pearl have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pearl
- Pearl is located in Bell County
- Pruden
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for Pruden
- Pruden is located in Claiborne County (TN)
- Pruden
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for Pruden
- Pruden is located in Bell County
- Hamlin Town
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Hamlin Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hamlin Town
- Hamlin Town is located in Claiborne County (TN)
- Fonde
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for Fonde
- Fonde is located in Bell County
- Clairfield
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for Clairfield
- Clairfield is located in Claiborne County (TN)
- Siler
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for Siler
- Siler is located in Whitley County
- Capito
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Capito have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Capito
- Capito is located in Bell County
- Morley
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for Morley
- Morley is located in Campbell County (TN)
- Nevisdale
(7 miles [11.3 km] to the northwest)
- Jump to our Gazetteer entry for Nevisdale
- Nevisdale is located in Whitley County
- Packard
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Packard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Packard
- Packard is located in Whitley County
- White Oak
(8 miles [12.9 km] to the southwest)
- Jump to our Gazetteer entry for White Oak
- White Oak is located in Campbell County (TN)
- Yellow Creek
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Yellow Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yellow Creek
- Yellow Creek is located in Bell County
- Edgewood
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Edgewood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edgewood
- Edgewood is located in Bell County
- Wheeler
(8 miles [12.9 km] to the northeast)
- Jump to our Gazetteer entry for Wheeler
- Wheeler is located in Knox County
- Lot
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Lot
- Lot is located in Whitley County
- Fairview
(9 miles [14.5 km] to the west)
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Whitley County
- Stony Fork Junction
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Stony Fork Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stony Fork Junction
- Stony Fork Junction is located in Bell County
- Louden
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for Louden
- Louden is located in Whitley County
- Ingram
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Ingram have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ingram
- Ingram is located in Bell County
- Warren
(10 miles [16.1 km] to the northeast)
- Jump to our Gazetteer entry for Warren
- Warren is located in Knox County
- Verne
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for Verne
- Verne is located in Whitley County
- Saxton
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Saxton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saxton
- Saxton is located in Whitley County
- Red Ash
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Red Ash have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Ash
- Red Ash is located in Whitley County
Off-the-Road Links ...
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the John A. Partin Cemetery. The point we use is located at these GPS coordinates - Latitude: 36.6200, Longitude: -83.9313 |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |