|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hall Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hall Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hall Cemetery. We've listed the following communities based on their distance, with the closest first.
- Mackville
(2 miles [3.2 km] to the northeast)
- Jump to our Gazetteer entry for Mackville
- Mackville is located in Washington County
- Population from the 2020 Census: 224 people
- Thompsonville
(2 miles [3.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Thompsonville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Thompsonville
- Thompsonville is located in Washington County
- Jenkinsville
(3 miles [4.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Jenkinsville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Jenkinsville
- Jenkinsville is located in Washington County
- Stewart
(5 miles [8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Stewart. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Stewart
- Stewart is located in Mercer County
- Simstown
(6 miles [9.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Simstown. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Simstown
- Simstown is located in Marion County
- Litsey
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Litsey. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Litsey
- Litsey is located in Washington County
- Springfield
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in Washington County
- Population from the 2020 Census: 2,987 people
- Jump to TripAdvisor's Tourism page for Springfield <4>
- Poplar Corner
(7 miles [11.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Poplar Corner. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Poplar Corner
- Poplar Corner is located in Marion County
- Craintown
(7 miles [11.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Craintown. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Craintown
- Craintown is located in Boyle County
- Willisburg
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Willisburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willisburg
- Willisburg is located in Washington County
- Population from the 2020 Census: 282 people
- Jump to TripAdvisor's Tourism page for Willisburg <4>
- Aliceton
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Aliceton. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Aliceton
- Aliceton is located in Boyle County
- Dixville
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for Dixville
- Dixville is located in Mercer County
- Saint Catharine
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Saint Catharine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Catharine
- Saint Catharine is located in Washington County
- Pulliam
(9 miles [14.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Pulliam. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Pulliam
- Pulliam is located in Washington County
- Penick
(9 miles [14.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Penick. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Penick
- Penick is located in Marion County
- Gravel Switch
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Gravel Switch
- Gravel Switch is located in Marion County
- Brumfield
(9 miles [14.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Brumfield. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Brumfield
- Brumfield is located in Boyle County
- Perryville
(9 miles [14.5 km] to the southeast)
- Riley
(10 miles [16.1 km] to the south)
- Jump to our Gazetteer entry for Riley
- Riley is located in Marion County
- Brush Grove
(10 miles [16.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Brush Grove. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Brush Grove
- Brush Grove is located in Washington County
- Nevada
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for Nevada
- Nevada is located in Mercer County
- Sharpsville
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sharpsville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Sharpsville
- Sharpsville is located in Washington County
- Mooresville
(10 miles [16.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Mooresville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Mooresville
- Mooresville is located in Washington County
- Mitchellsburg
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Mitchellsburg. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Mitchellsburg
- Mitchellsburg is located in Boyle County
- Duncan
(11 miles [17.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Duncan. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Duncan
- Duncan is located in Mercer County
- Tatham Springs
(11 miles [17.7 km] to the north)
- Jump to our Gazetteer entry for Tatham Springs
- Tatham Springs is located in Washington County
- Booker
(11 miles [17.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Booker. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Booker
- Booker is located in Washington County
Off-the-Road Links ...
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hall Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.7061, Longitude: -85.1041 In this case, the coordinates for the Hall Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|