|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Carpenter Family Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Carpenter Family Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Carpenter Family Cemetery (FG ID #2190770). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Carpenter Family Cemetery. We've listed the following communities based on their distance, with the closest first.
- Florence
(Less than 2 miles to the north)
- Devon
(Less than 2 miles to the southeast)
- Elsmere
(Less than 2 miles to the east)
- Note: The GPS coordinates that we are using for Elsmere have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elsmere
- Elsmere is located in Kenton County
- Population from the 2020 Census: 8,646 people
- Erlanger
(2 miles [3.2 km] to the northeast)
- Crestview Hills
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Crestview Hills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crestview Hills
- Crestview Hills is located in Kenton County
- Population from the 2020 Census: 3,333 people
- Jump to TripAdvisor's Tourism page for Crestview Hills <3>
- Edgewood
(3 miles [4.8 km] to the northeast)
- Limaburg
(3 miles [4.8 km] to the northwest)
- Oakbrook
(3 miles [4.8 km] to the west)
- Union
(4 miles [6.4 km] to the southwest)
- Richwood
(4 miles [6.4 km] to the south)
- Lakeside Park
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Lakeside Park have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeside Park
- Lakeside Park is located in Kenton County
- Population from the 2020 Census: 2,753 people
- Jump to TripAdvisor's Tourism page for Lakeside Park <3>
- Crescent Park
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Crescent Park have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crescent Park
- Crescent Park is located in Kenton County
- Constance
(5 miles [8 km] to the north)
- Hueys Corners
(5 miles [8 km] to the southwest)
- Independence
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Independence have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Independence
- Independence is located in Kenton County
- Population from the 2020 Census: 28,903 people
- Jump to TripAdvisor's Tourism page for Independence <3>
- Maurice
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Maurice have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maurice
- Maurice is located in Kenton County
- Fort Mitchell
(5 miles [8 km] to the northeast)
- Crescent Springs
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Crescent Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crescent Springs
- Crescent Springs is located in Kenton County
- Population from the 2020 Census: 4,138 people
- Jump to TripAdvisor's Tourism page for Crescent Springs <3>
- Villa Hills
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Villa Hills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Villa Hills
- Villa Hills is located in Kenton County
- Population from the 2020 Census: 7,481 people
- Jump to TripAdvisor's Tourism page for Villa Hills <3>
- Burlington
(5 miles [8 km] to the northwest)
- Kensington
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Kensington have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kensington
- Kensington is located in Boone County
- Fort Wright
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Fort Wright have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Wright
- Fort Wright is located in Kenton County
- Population from the 2020 Census: 5,779 people
- Jump to TripAdvisor's Tourism page for Fort Wright <3>
- Hebron
(6 miles [9.7 km] to the northwest)
- Stringtown
(6 miles [9.7 km] to the north)
- Nicholson
(7 miles [11.3 km] to the southeast)
- Latonia Lakes
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Latonia Lakes have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Latonia Lakes
- Latonia Lakes is located in Kenton County
- Fairview
(7 miles [11.3 km] to the east)
- Taylor Mill
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Taylor Mill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylor Mill
- Taylor Mill is located in Kenton County
- Population from the 2020 Census: 6,820 people
- Jump to TripAdvisor's Tourism page for Taylor Mill <3>
- Latonia
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Latonia have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Latonia
- Latonia is located in Kenton County
- Jump to TripAdvisor's Tourism page for Latonia <3>
- Kenton Vale
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Kenton Vale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kenton Vale
- Kenton Vale is located in Kenton County
- Population from the 2020 Census: 109 people
- Park Hills
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Park Hills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Park Hills
- Park Hills is located in Kenton County
- Population from the 2020 Census: 2,995 people
- Jump to TripAdvisor's Tourism page for Park Hills <3>
- Bromley
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Bromley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bromley
- Bromley is located in Kenton County
- Population from the 2020 Census: 799 people
- Delhi
(7 miles [11.3 km] to the north)
- Delhi Hills
(7 miles [11.3 km] to the north)
- Cotillion Village
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Cotillion Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cotillion Village
- Cotillion Village is located in Hamilton County (OH)
Off-the-Road Links ...
The official website for Boone County: www.boonecountyky.org/ The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Carpenter Family Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.9915, Longitude: -84.6298 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|