|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Big Springs Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Big Springs Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Big Springs Cemetery. We've listed the following communities based on their distance, with the closest first.
- Upton
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Upton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Upton
- Upton is located in Hardin County
- Population from the 2020 Census: 691 people
- Jump to TripAdvisor's Tourism page for Upton <3>
- Sonora
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Sonora have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sonora
- Sonora is located in Hardin County
- Population from the 2020 Census: 523 people
- Jump to TripAdvisor's Tourism page for Sonora <3>
- Melrose
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Melrose. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Melrose
- Melrose is located in Hardin County
- Flint Hill
(5 miles [8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Flint Hill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Flint Hill
- Flint Hill is located in Hardin County
- Seven Corners
(5 miles [8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Seven Corners. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Seven Corners
- Seven Corners is located in Hardin County
- Bonnieville
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Bonnieville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bonnieville
- Bonnieville is located in Hart County
- Population from the 2020 Census: 260 people
- Jump to TripAdvisor's Tourism page for Bonnieville <3>
- Hammonville
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Hammonville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hammonville
- Hammonville is located in Hart County
- Nolin
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Nolin. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Nolin
- Nolin is located in Hardin County
- Priceville
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for Priceville
- Priceville is located in Hart County
- Wheelers Mill
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Wheelers Mill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Wheelers Mill
- Wheelers Mill is located in Grayson County
- Magnolia
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for Magnolia
- Magnolia is located in Larue County
- Glendale Junction
(8 miles [12.9 km] to the north)
- Jump to our Gazetteer entry for Glendale Junction
- Glendale Junction is located in Hardin County
- Spurrier
(8 miles [12.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Spurrier. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Spurrier
- Spurrier is located in Hardin County
- Star Mills
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Star Mills. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Star Mills
- Star Mills is located in Hardin County
- Glendale
(9 miles [14.5 km] to the north)
- White Mills
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for White Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Mills
- White Mills is located in Hardin County
- White Mills Junction
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for White Mills Junction have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Mills Junction
- White Mills Junction is located in Hardin County
- Buffalo
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Buffalo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Larue County
- Hodgenville
(11 miles [17.7 km] to the northeast)
- Tonieville
(11 miles [17.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Tonieville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Tonieville
- Tonieville is located in Larue County
- Old Stephensburg
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Old Stephensburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Stephensburg
- Old Stephensburg is located in Hardin County
- Eastview
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Eastview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eastview
- Eastview is located in Hardin County
- Summit
(11 miles [17.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Summit. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Summit
- Summit is located in Hardin County
- Rio
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Rio. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rio
- Rio is located in Hart County
- Hansbrough
(12 miles [19.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Hansbrough. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hansbrough
- Hansbrough is located in Hardin County
- Stephensburg
(12 miles [19.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Stephensburg. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Stephensburg
- Stephensburg is located in Hardin County
- Gaithers
(12 miles [19.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Gaithers. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Gaithers
- Gaithers is located in Hardin County
Off-the-Road Links ...
The official website for Hardin County: www.hcky.org/ The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Big Springs Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.4695, Longitude: -85.9058 In this case, the coordinates for the Big Springs Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|