Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Belltown (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Belltown. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Belltown is located in Marion County.
To see how the shape of Kentucky's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Marion County: Boyle, Casey, Larue, Nelson, Taylor & Washington.
Below are the counties that are near Belltown. For each of these counties, we show a sample of those communities that are closest to Belltown:
- Marion County (The home county of Belltown)
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- New Market
(2 miles [3.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for New Market. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for New Market
- New Market is located in Marion County
- Google driving directions:
- From your current location to New Market
- From Belltown to New Market
- Calvary
(2 miles [3.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Calvary have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calvary
- Calvary is located in Marion County
- Lebanon
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Marion County
- Population from the 2020 Census: 5,733 people
- Jump to TripAdvisor's Tourism page for Lebanon <3>
- Saint Mary
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Saint Mary have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Mary
- Saint Mary is located in Marion County
- Jump to TripAdvisor's Tourism page for Saint Mary <3>
- Jessietown
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Jessietown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jessietown
- Jessietown is located in Marion County
- Saint Joseph
(4 miles [6.4 km] to the west)
- Frogtown
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Frogtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Frogtown
- Frogtown is located in Marion County
- Greenbriar
(5 miles [8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Greenbriar. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Greenbriar
- Greenbriar is located in Marion County
- Google driving directions:
- From your current location to Greenbriar
- From Belltown to Greenbriar
- Peck Ford
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Peck Ford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peck Ford
- Peck Ford is located in Marion County
- Phillipsburg
(6 miles [9.7 km] to the southeast)
- Burkes Spring
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Burkes Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burkes Spring
- Burkes Spring is located in Marion County
- Raywick
(7 miles [11.3 km] to the west)
- Adair County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Feathersburg
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Feathersburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Feathersburg
- Feathersburg is located in Adair County
- Speck
(17 miles [27.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Speck. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Speck
- Speck is located in Adair County
- Google driving directions:
- From your current location to Speck
- From Belltown to Speck
- Casey Creek
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Casey Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Casey Creek
- Casey Creek is located in Adair County
- Knifley
(21 miles [33.8 km] to the south)
- Holmes
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Holmes have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holmes
- Holmes is located in Adair County
- Coburg
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Coburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coburg
- Coburg is located in Adair County
- Dunbar Hill
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Dunbar Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunbar Hill
- Dunbar Hill is located in Adair County
- Kellyville
(23 miles [37 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Kellyville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Kellyville
- Kellyville is located in Adair County
- Google driving directions:
- From your current location to Kellyville
- From Belltown to Kellyville
- Barnett Springs
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Barnett Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnett Springs
- Barnett Springs is located in Adair County
- Cane Valley
(24 miles [38.6 km] to the south)
- Absher
(25 miles [40.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Absher. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Absher
- Absher is located in Adair County
- Google driving directions:
- From your current location to Absher
- From Belltown to Absher
- Neatsville
(25 miles [40.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Neatsville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Neatsville
- Neatsville is located in Adair County
- Google driving directions:
- From your current location to Neatsville
- From Belltown to Neatsville
- Anderson County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Sparrow
(27 miles [43.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sparrow. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sparrow
- Sparrow is located in Anderson County
- Google driving directions:
- From your current location to Sparrow
- From Belltown to Sparrow
- Ashbrook
(30 miles [48.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Ashbrook. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ashbrook
- Ashbrook is located in Anderson County
- Google driving directions:
- From your current location to Ashbrook
- From Belltown to Ashbrook
- Boyle County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Aliceton
(15 miles [24.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Aliceton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Aliceton
- Aliceton is located in Boyle County
- Google driving directions:
- From your current location to Aliceton
- From Belltown to Aliceton
- Craintown
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Craintown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Craintown
- Craintown is located in Boyle County
- Google driving directions:
- From your current location to Craintown
- From Belltown to Craintown
- Forkland
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Forkland. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Forkland
- Forkland is located in Boyle County
- Google driving directions:
- From your current location to Forkland
- From Belltown to Forkland
- Brumfield
(18 miles [29 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Brumfield. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Brumfield
- Brumfield is located in Boyle County
- Google driving directions:
- From your current location to Brumfield
- From Belltown to Brumfield
- Mitchellsburg
(19 miles [30.6 km] to the east)
- Perryville
(20 miles [32.2 km] to the northeast)
- Parksville
(23 miles [37 km] to the east)
- Wilsonville
(23 miles [37 km] to the east)
- Needmore
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Needmore have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Needmore
- Needmore is located in Boyle County
- Alum Springs
(25 miles [40.2 km] to the east)
- Atoka
(25 miles [40.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Atoka. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Atoka
- Atoka is located in Boyle County
- Google driving directions:
- From your current location to Atoka
- From Belltown to Atoka
- Davis Hill
(26 miles [41.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Davis Hill. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Davis Hill
- Davis Hill is located in Boyle County
- Google driving directions:
- From your current location to Davis Hill
- From Belltown to Davis Hill
- Bullitt County
- Lotus
(30 miles [48.3 km] to the northwest)
- Casey County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Atterson
(18 miles [29 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Atterson. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Atterson
- Atterson is located in Casey County
- Google driving directions:
- From your current location to Atterson
- From Belltown to Atterson
- Butchertown
(22 miles [35.4 km] to the east)
- Creston
(23 miles [37 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Creston. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Creston
- Creston is located in Casey County
- Google driving directions:
- From your current location to Creston
- From Belltown to Creston
- Rheber
(24 miles [38.6 km] to the southeast)
- Liberty
(25 miles [40.2 km] to the southeast)
- Evans Ford
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Evans Ford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evans Ford
- Evans Ford is located in Casey County
- Rubert Ford
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Rubert Ford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rubert Ford
- Rubert Ford is located in Casey County
- Cantown
(28 miles [45.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Cantown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Cantown
- Cantown is located in Casey County
- Google driving directions:
- From your current location to Cantown
- From Belltown to Cantown
- Dunnville
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Dunnville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunnville
- Dunnville is located in Casey County
- Middleburg
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Middleburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middleburg
- Middleburg is located in Casey County
- Phil
(29 miles [46.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Phil. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Phil
- Phil is located in Casey County
- Google driving directions:
- From your current location to Phil
- From Belltown to Phil
- Yosemite
(29 miles [46.7 km] to the southeast)
- Green County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Allendale
(19 miles [30.6 km] to the southwest)
- Summersville
(19 miles [30.6 km] to the southwest)
- Roachville
(21 miles [33.8 km] to the south)
- Gabe
(21 miles [33.8 km] to the southwest)
- Greensburg
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Greensburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greensburg
- Greensburg is located in Green County
- Population from the 2020 Census: 2,057 people
- Jump to TripAdvisor's Tourism page for Greensburg <3>
- Exie
(28 miles [45.1 km] to the southwest)
- Hardin County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Younger Creek
(27 miles [43.5 km] to the northwest)
- Colesburg
(30 miles [48.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Colesburg. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Colesburg
- Colesburg is located in Hardin County
- Google driving directions:
- From your current location to Colesburg
- From Belltown to Colesburg
- Glendale Junction
(30 miles [48.3 km] to the west)
- Hart County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Hammonville
(28 miles [45.1 km] to the west)
- Rio
(29 miles [46.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Rio. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Rio
- Rio is located in Hart County
- Google driving directions:
- From your current location to Rio
- From Belltown to Rio
- Canmer
(30 miles [48.3 km] to the southwest)
- Larue County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Gleanings
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Gleanings. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Gleanings
- Gleanings is located in Larue County
- Google driving directions:
- From your current location to Gleanings
- From Belltown to Gleanings
- White City ‑ Historic
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for White City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White City
- White City is located in Larue County
- Mount Sherman
(20 miles [32.2 km] to the west)
- Buffalo
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Buffalo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Larue County
- Roanoke
(23 miles [37 km] to the northwest)
- Hodgenville
(23 miles [37 km] to the west)
- Magnolia
(24 miles [38.6 km] to the west)
- Tonieville
(27 miles [43.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Tonieville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Tonieville
- Tonieville is located in Larue County
- Google driving directions:
- From your current location to Tonieville
- From Belltown to Tonieville
- Lincoln County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Milledgeville
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Milledgeville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milledgeville
- Milledgeville is located in Lincoln County
- Hustonville
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Hustonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hustonville
- Hustonville is located in Lincoln County
- Population from the 2020 Census: 368 people
- Jump to TripAdvisor's Tourism page for Hustonville <3>
- Moreland
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Moreland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moreland
- Moreland is located in Lincoln County
- Mount Salem
(28 miles [45.1 km] to the east)
- Chicken Bristle
(29 miles [46.7 km] to the east)
- McKinney
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for McKinney have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McKinney
- McKinney is located in Lincoln County
- Jump to TripAdvisor's Tourism page for McKinney <3>
- New Salem
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for New Salem have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Salem
- New Salem is located in Lincoln County
- Mercer County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Stewart
(19 miles [30.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Stewart. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Stewart
- Stewart is located in Mercer County
- Google driving directions:
- From your current location to Stewart
- From Belltown to Stewart
- Dixville
(22 miles [35.4 km] to the northeast)
- Nevada
(24 miles [38.6 km] to the northeast)
- Duncan
(27 miles [43.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Duncan. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Duncan
- Duncan is located in Mercer County
- Google driving directions:
- From your current location to Duncan
- From Belltown to Duncan
- Tablow
(27 miles [43.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Tablow. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Tablow
- Tablow is located in Mercer County
- Google driving directions:
- From your current location to Tablow
- From Belltown to Tablow
- Harrodsburg
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Harrodsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harrodsburg
- Harrodsburg is located in Mercer County
- Population from the 2020 Census: 8,544 people
- Jump to TripAdvisor's Tourism page for Harrodsburg <3>
- Jackson
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Jackson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jackson
- Jackson is located in Mercer County
- Nelson County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- New Hope
(12 miles [19.3 km] to the northwest)
- Gethsemane
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Gethsemane have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gethsemane
- Gethsemane is located in Nelson County
- Stiles
(14 miles [22.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Stiles. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Stiles
- Stiles is located in Nelson County
- Google driving directions:
- From your current location to Stiles
- From Belltown to Stiles
- Greenbrier
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Greenbrier have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenbrier
- Greenbrier is located in Nelson County
- Howardstown
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Howardstown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howardstown
- Howardstown is located in Nelson County
- Botland
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Botland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Botland
- Botland is located in Nelson County
- Balltown
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Balltown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Balltown
- Balltown is located in Nelson County
- Blue Gap
(17 miles [27.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Blue Gap. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Blue Gap
- Blue Gap is located in Nelson County
- Google driving directions:
- From your current location to Blue Gap
- From Belltown to Blue Gap
- Culvertown
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Culvertown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Culvertown
- Culvertown is located in Nelson County
- New Haven
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for New Haven have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Haven
- New Haven is located in Nelson County
- Population from the 2020 Census: 900 people
- Jump to TripAdvisor's Tourism page for New Haven <3>
- Woodlawn
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Woodlawn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodlawn
- Woodlawn is located in Nelson County
- Bardstown
(20 miles [32.2 km] to the northwest)
- Spencer County
- Wakefield
(29 miles [46.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Wakefield. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Wakefield
- Wakefield is located in Spencer County
- Google driving directions:
- From your current location to Wakefield
- From Belltown to Wakefield
- Taylor County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Saloma
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Saloma. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Saloma
- Saloma is located in Taylor County
- Google driving directions:
- From your current location to Saloma
- From Belltown to Saloma
- Maple
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Maple. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Maple
- Maple is located in Taylor County
- Google driving directions:
- From your current location to Maple
- From Belltown to Maple
- Mannsville
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Mannsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mannsville
- Mannsville is located in Taylor County
- Acton
(13 miles [20.9 km] to the south)
- Campbellsville
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Campbellsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campbellsville
- Campbellsville is located in Taylor County
- Population from the 2020 Census: 11,430 people
- Jump to TripAdvisor's Tourism page for Campbellsville <3>
- Bengal
(14 miles [22.5 km] to the southwest)
- Elk Horn
(15 miles [24.1 km] to the south)
- Wright's
(16 miles [25.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Wright's. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Wright's
- Wright's is located in Taylor County
- Google driving directions:
- From your current location to Wright's
- From Belltown to Wright's
- Washington County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Springfield
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in Washington County
- Population from the 2020 Census: 2,987 people
- Jump to TripAdvisor's Tourism page for Springfield <3>
- Saint Catharine
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Saint Catharine have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Catharine
- Saint Catharine is located in Washington County
- Fredericktown
(15 miles [24.1 km] to the north)
- Booker
(16 miles [25.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Booker. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Booker
- Booker is located in Washington County
- Google driving directions:
- From your current location to Booker
- From Belltown to Booker
- Thompsonville
(16 miles [25.7 km] to the northeast)
- Litsey
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Litsey. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Litsey
- Litsey is located in Washington County
- Google driving directions:
- From your current location to Litsey
- From Belltown to Litsey
- Mooresville
(18 miles [29 km] to the north)
- Jenkinsville
(19 miles [30.6 km] to the northeast)
- Mackville
(19 miles [30.6 km] to the northeast)
- Willisburg
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Willisburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willisburg
- Willisburg is located in Washington County
- Population from the 2020 Census: 282 people
- Jump to TripAdvisor's Tourism page for Willisburg <3>
- Brush Grove
(22 miles [35.4 km] to the north)
- Pulliam
(22 miles [35.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Pulliam. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Pulliam
- Pulliam is located in Washington County
- Google driving directions:
- From your current location to Pulliam
- From Belltown to Pulliam
For an expanded list of the communities that are closest to Belltown, see our County-by-County Page for Belltown.
Cemeteries Near Belltown ...
Below are cemeteries that are in the vicinity of Belltown.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Belltown covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Belltown, with the one closest to Belltown listed first.
- Holy Name of Mary Cemetery
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for the Holy Name of Mary Cemetery
- Note: The GPS coordinates that we are using for the Holy Name of Mary Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Lebanon National Cemetery
(2 miles [3.2 km] to the northeast)
- St. Agustines Cemetery
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for the St. Agustines Cemetery
- Note: The GPS coordinates that we are using for the St. Agustines Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- St. Charles Cemetery
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for the St. Charles Cemetery
- Note: The GPS coordinates that we are using for the St. Charles Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Ryder Cemetery
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for the Ryder Cemetery
- Note: The GPS coordinates that we are using for the Ryder Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- St. Matthews Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the St. Matthews Cemetery
- Note: The GPS coordinates that we are using for the St. Matthews Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Benningfield Cemetery
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for the Benningfield Cemetery
- Note: The GPS coordinates that we are using for the Benningfield Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Feather Cemetery
(6 miles [9.7 km] to the southwest)
- Jump to our Gazetteer entry for the Feather Cemetery
- Note: The GPS coordinates that we are using for the Feather Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- St. Francis Xavier Cemetery
(6 miles [9.7 km] to the west)
- Kerr Cemetery
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for the Kerr Cemetery
- Note: The GPS coordinates that we are using for the Kerr Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Colvin Cemetery
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for the Colvin Cemetery
- Note: The GPS coordinates that we are using for the Colvin Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Brookman Cemetery
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for the Brookman Cemetery
- Note: The GPS coordinates that we are using for the Brookman Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Continue List (384 more) ...
- Liberty Cemetery
(7 miles [11.3 km] to the southeast)
- Jump to our Gazetteer entry for the Liberty Cemetery
- Note: The GPS coordinates that we are using for the Liberty Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Old Liberty Cemetery
(7 miles [11.3 km] to the southeast)
- Mt. Washington Cemetery
(8 miles [12.9 km] to the southwest)
- Jump to our Gazetteer entry for the Mt. Washington Cemetery
- Note: The GPS coordinates that we are using for the Mt. Washington Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>
While we didn't find Belltown in the Atlas, the following 1895 communities would have been found near the current location of Belltown.
These communities are listed based on their distance from Belltown, with the one closest to Belltown listed first.
- New Market
(2 miles [3.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for New Market. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for New Market
- New Market is located in Marion County
- Google driving directions:
- From your current location to New Market
- From Belltown to New Market
- Calvary
(2 miles [3.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Calvary have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calvary
- Calvary is located in Marion County
- Lebanon
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Marion County
- Population from the 2020 Census: 5,733 people
- Jump to TripAdvisor's Tourism page for Lebanon <3>
- Finley
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Finley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Finley
- Finley is located in Taylor County
- Phillipsburg
(6 miles [9.7 km] to the southeast)
- Raywick
(7 miles [11.3 km] to the west)
- Willowtown
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Willowtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willowtown
- Willowtown is located in Taylor County
- Spurlington
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Spurlington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spurlington
- Spurlington is located in Taylor County
- Penick
(8 miles [12.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Penick. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Penick
- Penick is located in Marion County
- Google driving directions:
- From your current location to Penick
- From Belltown to Penick
- Loretto
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Loretto have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loretto
- Loretto is located in Marion County
- Population from the 2020 Census: 692 people
- Jump to TripAdvisor's Tourism page for Loretto <3>
- Saloma
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Saloma. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Saloma
- Saloma is located in Taylor County
- Google driving directions:
- From your current location to Saloma
- From Belltown to Saloma
- Bradfordsville
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Bradfordsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bradfordsville
- Bradfordsville is located in Marion County
- Population from the 2020 Census: 299 people
- Jump to TripAdvisor's Tourism page for Bradfordsville <3>
- Continue List (15 more) ...
- Dant
(10 miles [16.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Dant. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Dant
- Dant is located in Marion County
- Google driving directions:
- From your current location to Dant
- From Belltown to Dant
- Attilla
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Attilla have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Attilla
- Attilla is located in Larue County
- Maple
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Maple. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Maple
- Maple is located in Taylor County
- Google driving directions:
- From your current location to Maple
- From Belltown to Maple
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Belltown. See our List of 1890's Communities around Belltown.
Newspapers Published in Belltown ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 65 newspapers that have been published in the area around Belltown.
Although we're unaware of any newspapers that were published in the immediate area of Belltown, there are papers which were published within 23 miles [37 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Belltown.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Belltown:
- Websites specific to Kentucky
- Pages specific to Marion County
- Genealogy information for nearby counties
- Adair County
- Anderson County
- Boyle County
- Bullitt County
- Casey County
- Green County
- Hardin County
- Hart County
- Larue County
- Lincoln County
- Mercer County
- Nelson County
- Spencer County
- Taylor County
- Washington County
- Cemetery Information and Directories for Kentucky
Off-the-Road Links ...
Unfortunately, we don't know of a website for Belltown. If you can help, please contact us through our Feedback Page.
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Belltown, please let us know so that we can improve our accuracy. |
<5> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Belltown) to Point B.Our distance measurements begin at a specific point in Belltown. The point we use is located at these GPS coordinates - Latitude: 37.5374, Longitude: -85.3060 |