Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Anthoston had a population of 84 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Anthoston, with the one closest to Anthoston listed first.
- Rankin
(2 miles [3.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Rankin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rankin
- Rankin is located in Henderson County
- Niagara
(3 miles [4.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Niagara. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Niagara
- Niagara is located in Henderson County
- Zion
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Zion have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zion
- Zion is located in Henderson County
- Weaverton
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Weaverton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weaverton
- Weaverton is located in Henderson County
- Robards
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Robards have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Robards
- Robards is located in Henderson County
- Population from the 2020 Census: 497 people
- Jump to TripAdvisor's Tourism page for Robards <4>
- Cairo
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Cairo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cairo
- Cairo is located in Henderson County
- Henderson
(6 miles [9.7 km] to the northwest)
- Delaware
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Delaware have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Delaware
- Delaware is located in Daviess County
- Hebbardsville
(8 miles [12.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Hebbardsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hebbardsville
- Hebbardsville is located in Henderson County
- Baskett
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Baskett have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Baskett
- Baskett is located in Henderson County
- Dixie
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Dixie. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Dixie
- Dixie is located in Henderson County
- Bluff City
(9 miles [14.5 km] to the east)
- Jump to our Gazetteer entry for Bluff City
- Bluff City is located in Henderson County
- Spottsville
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Spottsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Spottsville
- Spottsville is located in Henderson County
- Geneva
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Geneva have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Geneva
- Geneva is located in Henderson County
- Corydon
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Corydon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Corydon
- Corydon is located in Henderson County
- Population from the 2020 Census: 685 people
- Jump to TripAdvisor's Tourism page for Corydon <4>
- Sebree
(10 miles [16.1 km] to the south)
- Jonesburg
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Jonesburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonesburg
- Jonesburg is located in Henderson County
- Congleton
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Congleton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Congleton
- Congleton is located in McLean County
- Cypress
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Cypress have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cypress
- Cypress is located in Vanderburgh County (IN)
- Curdsville
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Curdsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Curdsville
- Curdsville is located in Daviess County
- Vaughan
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Vaughan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vaughan
- Vaughan is located in Vanderburgh County (IN)
- Reed
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for Reed
- Reed is located in Henderson County
- Wanamaker
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Wanamaker have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wanamaker
- Wanamaker is located in Webster County
- Elba
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Elba. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Elba
- Elba is located in McLean County
- Saint Joseph
(12 miles [19.3 km] to the east)
- Jump to our Gazetteer entry for Saint Joseph
- Saint Joseph is located in Daviess County
Off-the-Road Links ...
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Anthoston, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |