Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Allensville had a population of 426 people in 1895 with a post office and railroad service. In 2010, Allensville had a population of 157 people.
The following communities are listed based on their distance from Allensville, with the one closest to Allensville listed first.
- Olmstead
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Olmstead have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olmstead
- Olmstead is located in Logan County
- Hadensville
(4 miles [6.4 km] to the southwest)
- Anderson
(5 miles [8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Anderson. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Anderson
- Anderson is located in Todd County
- Google driving directions:
- From your current location to Anderson
- From Allensville to Anderson
- Keysburg
(5 miles [8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Keysburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Keysburg
- Keysburg is located in Logan County
- Google driving directions:
- From your current location to Keysburg
- From Allensville to Keysburg
- Daysville
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Daysville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Daysville
- Daysville is located in Todd County
- Dot
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Dot have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dot
- Dot is located in Logan County
- Ferguson
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Ferguson. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ferguson
- Ferguson is located in Logan County
- Google driving directions:
- From your current location to Ferguson
- From Allensville to Ferguson
- Bradshaw
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Bradshaw have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bradshaw
- Bradshaw is located in Todd County
- Guthrie
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Guthrie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Guthrie
- Guthrie is located in Todd County
- Population from the 2020 Census: 1,426 people
- Jump to TripAdvisor's Tourism page for Guthrie <4>
- Pinchem
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Pinchem have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinchem
- Pinchem is located in Todd County
- Forts ‑ Historic
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Forts have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forts
- Forts is located in Robertson County (TN)
- Cave Spring
(8 miles [12.9 km] to the northeast)
- Elkton
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Elkton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elkton
- Elkton is located in Todd County
- Population from the 2020 Census: 2,157 people
- Jump to TripAdvisor's Tourism page for Elkton <4>
- Gordonsville
(9 miles [14.5 km] to the north)
- Oakville
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Oakville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakville
- Oakville is located in Logan County
- Trenton
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Trenton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trenton
- Trenton is located in Todd County
- Population from the 2020 Census: 378 people
- Jump to TripAdvisor's Tourism page for Trenton <4>
- Claymour
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Claymour have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Claymour
- Claymour is located in Todd County
- Hampton Station
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Hampton Station have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hampton Station
- Hampton Station is located in Montgomery County (TN)
- Cedar Hill
(11 miles [17.7 km] to the south)
- Barren Plain
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Barren Plain have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barren Plain
- Barren Plain is located in Robertson County (TN)
- Justice
(11 miles [17.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Justice. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Justice
- Justice is located in Logan County
- Google driving directions:
- From your current location to Justice
- From Allensville to Justice
- Port Royal
(12 miles [19.3 km] to the south)
- Adairville
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Adairville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Adairville
- Adairville is located in Logan County
- Population from the 2020 Census: 894 people
- Jump to TripAdvisor's Tourism page for Adairville <4>
- Holmansville ‑ Historic
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Holmansville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holmansville
- Holmansville is located in Robertson County (TN)
- Russellville
(13 miles [20.9 km] to the northeast)
- Sharon Grove
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Sharon Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sharon Grove
- Sharon Grove is located in Todd County
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Allensville. If you can help, please contact us through our Feedback Page.
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Allensville, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |