Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Sumner had a population of 1,037 people in 1895 with a post office and railroad service. In 2020, Sumner had a population of 2,961 people.
The following communities are listed based on their distance from Sumner, with the one closest to Sumner listed first.
- Bridgeport
(5 miles [8 km] to the east)
- Amity
(5 miles [8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Amity. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Amity
- Amity is located in Richland County
- Google driving directions:
- From your current location to Amity
- From Sumner to Amity
- Claremont
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Claremont have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Claremont
- Claremont is located in Richland County
- Population from the 2020 Census: 168 people
- Jump to TripAdvisor's Tourism page for Claremont <2>
- Berryville
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Berryville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Berryville
- Berryville is located in Richland County
- Google driving directions:
- From your current location to Berryville
- From Sumner to Berryville
- Petersburg
(8 miles [12.9 km] to the south)
- Chauncey
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Chauncey have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chauncey
- Chauncey is located in Lawrence County
- Lawrenceville
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Lawrenceville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawrenceville
- Lawrenceville is located in Lawrence County
- Population from the 2020 Census: 4,380 people
- Jump to TripAdvisor's Tourism page for Lawrenceville <2>
- Westport
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Westport have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westport
- Westport is located in Lawrence County
- Calhoun
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Calhoun have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calhoun
- Calhoun is located in Richland County
- Population from the 2020 Census: 164 people
- Jump to TripAdvisor's Tourism page for Calhoun <2>
- Stringtown
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Stringtown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stringtown
- Stringtown is located in Richland County
- Landes
(10 miles [16.1 km] to the north)
- Billett
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Billett. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Billett
- Billett is located in Lawrence County
- Google driving directions:
- From your current location to Billett
- From Sumner to Billett
- Pinkstaff
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Pinkstaff have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinkstaff
- Pinkstaff is located in Lawrence County
- Rafetown
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Rafetown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rafetown
- Rafetown is located in Jasper County
- Olney
(12 miles [19.3 km] to the west)
- Parkersburg
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Parkersburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkersburg
- Parkersburg is located in Richland County
- Population from the 2020 Census: 201 people
- Jump to TripAdvisor's Tourism page for Parkersburg <2>
- Birds
(13 miles [20.9 km] to the northeast)
- Villas
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Villas have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Villas
- Villas is located in Crawford County
- Hardinville
(13 miles [20.9 km] to the north)
- Friendsville
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Friendsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Friendsville
- Friendsville is located in Wabash County
- Saint Francisville
(14 miles [22.5 km] to the southeast)
- Dundas
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Dundas have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dundas
- Dundas is located in Richland County
- Jump to TripAdvisor's Tourism page for Dundas <2>
- West Salem
(15 miles [24.1 km] to the southwest)
- Mills Prairie ‑ Historic
(15 miles [24.1 km] to the south)
- Allendale
(15 miles [24.1 km] to the southeast)
- Beal
(15 miles [24.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Beal. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Beal
- Beal is located in Knox County (IN)
- Google driving directions:
- From your current location to Beal
- From Sumner to Beal
- West Liberty
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for West Liberty have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Liberty
- West Liberty is located in Jasper County
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Sumner. If you can help, please contact us through our Feedback Page.
The official website for State of Illinois: https://illinois.gov
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Sumner, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |