RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Illinois >> Putnam County >> Standard >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Illinois

The Commemorative Quarter for Illinois





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Standard (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Standard. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Standard is located in Putnam County.

To see how the shape of Illinois' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Putnam County: Bureau, La Salle & Marshall.

Below are the counties that are near Standard. For each of these counties, we show a sample of those communities that are closest to Standard:

  • Putnam County     (The home county of Standard)
    • The following are listed by their distance from Standard, with the one closest to Standard listed first.
    • Granville
      (2 miles [3.2 km] to the west)
      • Note: The GPS coordinates that we are using for Granville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Granville
      • Granville is located in Putnam County
      • Population from the 2020 Census: 1,298 people
      • Jump to TripAdvisor's Tourism page for Granville <2>
    • Mark
      (3 miles [4.8 km] to the west)
      • Note: The GPS coordinates that we are using for Mark have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mark
      • Mark is located in Putnam County
      • Population from the 2020 Census: 546 people
      • Jump to TripAdvisor's Tourism page for Mark <2>
    • Mount Palatine
      (4 miles [6.4 km] to the south)
      • Note: The GPS coordinates that we are using for Mount Palatine have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Palatine
      • Mount Palatine is located in Putnam County
    • McNabb
      (5 miles [8 km] to the south)
      • Note: The GPS coordinates that we are using for McNabb have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McNabb
      • McNabb is located in Putnam County
      • Population from the 2020 Census: 258 people
      • Jump to TripAdvisor's Tourism page for McNabb <2>
    • Hennepin
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for Hennepin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hennepin
      • Hennepin is located in Putnam County
      • Population from the 2020 Census: 701 people
      • Jump to TripAdvisor's Tourism page for Hennepin <2>
    • Magnolia
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Magnolia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Magnolia
      • Magnolia is located in Putnam County
      • Population from the 2020 Census: 244 people
      • Jump to TripAdvisor's Tourism page for Magnolia <2>
    • Putnam
      (12 miles [19.3 km] to the southwest)
  • Bureau County
    • The following are listed by their distance from Standard, with the one closest to Standard listed first.
    • Spring Valley
      (4 miles [6.4 km] to the north)
      • Note: The GPS coordinates that we are using for Spring Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spring Valley
      • Spring Valley is located in Bureau County
      • Population from the 2020 Census: 5,065 people
      • Jump to TripAdvisor's Tourism page for Spring Valley <2>
    • Dalzell
      (6 miles [9.7 km] to the north)
      • Note: The GPS coordinates that we are using for Dalzell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dalzell
      • Dalzell is located in Bureau County
      • Population from the 2020 Census: 653 people
      • Jump to TripAdvisor's Tourism page for Dalzell <2>
    • De Pue
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for De Pue have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for De Pue
      • De Pue is located in Bureau County
      • Population from the 2020 Census: 1,665 people
    • Ottville
      (7 miles [11.3 km] to the northwest)
      • Jump to our Gazetteer entry for Ottville
      • Ottville is located in Bureau County
    • Ladd
      (8 miles [12.9 km] to the north)
      • Jump to our Gazetteer entry for Ladd
      • Ladd is located in Bureau County
      • Population from the 2020 Census: 1,184 people
      • Jump to TripAdvisor's Tourism page for Ladd <2>
    • Seatonville
      (8 miles [12.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Seatonville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Seatonville
      • Seatonville is located in Bureau County
      • Population from the 2020 Census: 293 people
      • Jump to TripAdvisor's Tourism page for Seatonville <2>
    • Hollowayville
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hollowayville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hollowayville
      • Hollowayville is located in Bureau County
      • Population from the 2020 Census: 85 people
    • Bureau Junction
      (10 miles [16.1 km] to the west)
      • Jump to our Gazetteer entry for Bureau Junction
      • Bureau Junction is located in Bureau County
      • Population from the 2020 Census: 297 people
      • Bureau Junction has also been known as:
      • Bureau
      • Jump to TripAdvisor's Tourism page for Bureau Junction <2>
    • Cherry
      (11 miles [17.7 km] to the north)
      • Note: The GPS coordinates that we are using for Cherry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cherry
      • Cherry is located in Bureau County
      • Population from the 2020 Census: 448 people
      • Jump to TripAdvisor's Tourism page for Cherry <2>
    • Zearing
      (14 miles [22.5 km] to the northwest)
      • Jump to our Gazetteer entry for Zearing
      • Zearing is located in Bureau County
    • Arlington
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Arlington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Arlington
      • Arlington is located in Bureau County
      • Population from the 2020 Census: 179 people
      • Jump to TripAdvisor's Tourism page for Arlington <2>
    • Malden
      (15 miles [24.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Malden have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Malden
      • Malden is located in Bureau County
      • Population from the 2020 Census: 338 people
      • Jump to TripAdvisor's Tourism page for Malden <2>
    • Dover
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Dover have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dover
      • Dover is located in Bureau County
      • Population from the 2020 Census: 151 people
      • Jump to TripAdvisor's Tourism page for Dover <2>
  • La Salle County
    • The following are listed by their distance from Standard, with the one closest to Standard listed first.
    • Cedar Point
      (2 miles [3.2 km] to the east)
      • Note: The GPS coordinates that we are using for Cedar Point have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cedar Point
      • Cedar Point is located in La Salle County
      • Population from the 2020 Census: 251 people
      • Jump to TripAdvisor's Tourism page for Cedar Point <2>
    • Oglesby
      (6 miles [9.7 km] to the northeast)
    • Peru
      (6 miles [9.7 km] to the northeast)
      • Jump to our Gazetteer entry for Peru
      • Peru is located in La Salle County
      • Population from the 2020 Census: 9,612 people
      • Jump to TripAdvisor's Tourism page for Peru <2>
    • Tonica
      (6 miles [9.7 km] to the southeast)
    • Deer Park
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Deer Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Deer Park
      • Deer Park is located in La Salle County
    • Priscilla ‑ Historic
      (8 miles [12.9 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Priscilla. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Priscilla
      • Priscilla is located in La Salle County
    • Vermilionville
      (9 miles [14.5 km] to the east)
      • Jump to our Gazetteer entry for Vermilionville
      • Vermilionville is located in La Salle County
    • La Salle
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for La Salle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for La Salle
      • La Salle is located in La Salle County
      • Population from the 2020 Census: 8,897 people
      • Jump to TripAdvisor's Tourism page for La Salle <2>
    • North Utica
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for North Utica have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Utica
      • North Utica is located in La Salle County
      • Population from the 2020 Census: 1,333 people
    • Utica
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Utica have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Utica
      • Utica is located in La Salle County
      • Jump to TripAdvisor's Tourism page for Utica <2>
    • Lostant
      (10 miles [16.1 km] to the southeast)
      • Jump to our Gazetteer entry for Lostant
      • Lostant is located in La Salle County
      • Population from the 2020 Census: 477 people
      • Lostant has also been known as:
      • Lost Ant
      • Jump to TripAdvisor's Tourism page for Lostant <2>
    • Leonore
      (11 miles [17.7 km] to the southeast)
    • Waltham
      (14 miles [22.5 km] to the northeast)
      • Jump to our Gazetteer entry for Waltham
      • Waltham is located in La Salle County
  • Lee County
    • The following are listed by their distance from Standard, with the one closest to Standard listed first.
    • Sublette
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Sublette have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sublette
      • Sublette is located in Lee County
      • Population from the 2020 Census: 415 people
      • Jump to TripAdvisor's Tourism page for Sublette <2>
    • Radley
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Radley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Radley
      • Radley is located in Lee County
    • Compton
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Compton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Compton
      • Compton is located in Lee County
      • Population from the 2020 Census: 279 people
      • Jump to TripAdvisor's Tourism page for Compton <2>
    • West Brooklyn
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for West Brooklyn have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Brooklyn
      • West Brooklyn is located in Lee County
      • Population from the 2020 Census: 131 people
      • Jump to TripAdvisor's Tourism page for West Brooklyn <2>
  • Livingston County
    • The following are listed by their distance from Standard, with the one closest to Standard listed first.
    • Munster
      (17 miles [27.4 km] to the southeast)
      • Jump to our Gazetteer entry for Munster
      • Munster is located in Livingston County
    • Ancona
      (21 miles [33.8 km] to the southeast)
    • Vermilion City
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Vermilion City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vermilion City
      • Vermilion City is located in Livingston County
    • Long Point
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Long Point have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Long Point
      • Long Point is located in Livingston County
      • Population from the 2020 Census: 212 people
      • Jump to TripAdvisor's Tourism page for Long Point <2>
    • Missal
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Missal have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Missal
      • Missal is located in Livingston County
    • Blackstone
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Blackstone have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blackstone
      • Blackstone is located in Livingston County
      • Jump to TripAdvisor's Tourism page for Blackstone <2>
    • Cornell
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cornell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cornell
      • Cornell is located in Livingston County
      • Population from the 2020 Census: 451 people
      • Jump to TripAdvisor's Tourism page for Cornell <2>
    • Budd
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Budd have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Budd
      • Budd is located in Livingston County
  • Marshall County
    • The following are listed by their distance from Standard, with the one closest to Standard listed first.
    • Henry
      (13 miles [20.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Henry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Henry
      • Henry is located in Marshall County
      • Population from the 2020 Census: 2,230 people
      • Jump to TripAdvisor's Tourism page for Henry <2>
    • Evans ‑ Historic
      (15 miles [24.1 km] to the south)
      • Jump to our Gazetteer entry for Evans
      • Evans is located in Marshall County
    • Varna
      (15 miles [24.1 km] to the south)
      • Note: The GPS coordinates that we are using for Varna have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Varna
      • Varna is located in Marshall County
      • Population from the 2020 Census: 342 people
      • Jump to TripAdvisor's Tourism page for Varna <2>
    • Wenona
      (15 miles [24.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Wenona have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wenona
      • Wenona is located in Marshall County
      • Population from the 2020 Census: 926 people
      • Jump to TripAdvisor's Tourism page for Wenona <2>
    • Toluca
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Toluca have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Toluca
      • Toluca is located in Marshall County
      • Population from the 2020 Census: 1,249 people
      • Jump to TripAdvisor's Tourism page for Toluca <2>
    • La Rose
      (19 miles [30.6 km] to the south)
      • Note: The GPS coordinates that we are using for La Rose have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for La Rose
      • La Rose is located in Marshall County
      • Population from the 2020 Census: 127 people
      • Jump to TripAdvisor's Tourism page for La Rose <2>
    • Lacon
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lacon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lacon
      • Lacon is located in Marshall County
      • Population from the 2020 Census: 1,713 people
      • Jump to TripAdvisor's Tourism page for Lacon <2>
    • Sparland
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Sparland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sparland
      • Sparland is located in Marshall County
      • Population from the 2020 Census: 357 people
      • Jump to TripAdvisor's Tourism page for Sparland <2>
    • Hopewell
      (23 miles [37 km] to the southwest)
      • Note: The GPS coordinates that we are using for Hopewell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hopewell
      • Hopewell is located in Marshall County
      • Population from the 2020 Census: 394 people
    • Camp Grove
      (26 miles [41.8 km] to the southwest)
  • Peoria County
    • The following are listed by their distance from Standard, with the one closest to Standard listed first.
    • Chillicothe
      (28 miles [45.1 km] to the southwest)
    • Rome
      (30 miles [48.3 km] to the southwest)
  • Stark County
    • The following are listed by their distance from Standard, with the one closest to Standard listed first.
    • Bradford
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Bradford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bradford
      • Bradford is located in Stark County
      • Population from the 2020 Census: 668 people
      • Jump to TripAdvisor's Tourism page for Bradford <2>
    • Castleton
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Castleton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Castleton
      • Castleton is located in Stark County
      • Jump to TripAdvisor's Tourism page for Castleton <2>
    • Speer
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Speer have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Speer
      • Speer is located in Stark County
      • Jump to TripAdvisor's Tourism page for Speer <2>
  • Woodford County
    • The following are listed by their distance from Standard, with the one closest to Standard listed first.
    • Washburn
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Washburn have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Washburn
      • Washburn is located in Woodford County
      • Population from the 2020 Census: 1,064 people
      • Jump to TripAdvisor's Tourism page for Washburn <2>
    • Minonk
      (25 miles [40.2 km] to the south)
    • Benson
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Benson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Benson
      • Benson is located in Woodford County
      • Population from the 2020 Census: 401 people
      • Jump to TripAdvisor's Tourism page for Benson <2>
    • Woodford
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Woodford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodford
      • Woodford is located in Woodford County

For an expanded list of the communities that are closest to Standard, see our County-by-County Page for Standard.

Newspapers Published in Standard ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 141 newspapers that have been published in the area around Standard.

Although we're unaware of any newspapers that were published in the immediate area of Standard, there are papers which were published within 26 miles [41.8 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Standard.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Standard:

Cemeteries Near Standard ...

Below are cemeteries that are in the vicinity of Standard.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Standard covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Standard, with the one closest to Standard listed first.

  • Sacred Heart Cemetery
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for the Sacred Heart Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Sacred Heart Cemetery
  • Granville Cemetery
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for the Granville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Granville Cemetery
  • St. Josephs Cemetery
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for the St. Josephs Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Josephs Cemetery
  • Union Grove Cemetery
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for the Union Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Union Grove Cemetery
  • Mt. Palatine Cemetery
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for the Mt. Palatine Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mt. Palatine Cemetery
  • St. Bede Cemetery
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for the St. Bede Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Bede Cemetery
  • Florid Cemetery
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for the Florid Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Florid Cemetery
  • Florid Cemetery
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for the Florid Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Florid Cemetery
  • Immaculate Conception Cemetery
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for the Immaculate Conception Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Immaculate Conception Cemetery
  • Miller Cemetery
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Miller Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Miller Cemetery
  • St. George Syrian Cemetery
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the St. George Syrian Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. George Syrian Cemetery
  • St.s Peter & Paul Cemetery
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the St.s Peter & Paul Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St.s Peter & Paul Cemetery
  • Continue List   (272 more) ...
    • Mt. Olivet Catholic Cemetery
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for the Mt. Olivet Catholic Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Mt. Olivet Catholic Cemetery
    • St. Valentines Cemetery
      (5 miles [8 km] to the north)
    • Lithuanian Cemetery
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for the Lithuanian Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Lithuanian Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

While we didn't find Standard in the Atlas, the following 1895 communities would have been found near the current location of Standard.

These communities are listed based on their distance from Standard, with the one closest to Standard listed first.

  • Granville
    (2 miles [3.2 km] to the west)
    • Note: The GPS coordinates that we are using for Granville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Granville
    • Granville is located in Putnam County
    • Population from the 2020 Census: 1,298 people
    • Jump to TripAdvisor's Tourism page for Granville <2>
  • Mount Palatine
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Mount Palatine have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Palatine
    • Mount Palatine is located in Putnam County
  • Spring Valley
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Spring Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spring Valley
    • Spring Valley is located in Bureau County
    • Population from the 2020 Census: 5,065 people
    • Jump to TripAdvisor's Tourism page for Spring Valley <2>
  • Florid
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Florid have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Florid
    • Florid is located in Putnam County
  • Tonica
    (6 miles [9.7 km] to the southeast)
  • Ticona
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Ticona have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ticona
    • Ticona is located in La Salle County
  • Oglesby
    (6 miles [9.7 km] to the northeast)
  • Peru
    (6 miles [9.7 km] to the northeast)
    • Jump to our Gazetteer entry for Peru
    • Peru is located in La Salle County
    • Population from the 2020 Census: 9,612 people
    • Jump to TripAdvisor's Tourism page for Peru <2>
  • Deer Park
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Deer Park have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Deer Park
    • Deer Park is located in La Salle County
  • De Pue
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for De Pue have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for De Pue
    • De Pue is located in Bureau County
    • Population from the 2020 Census: 1,665 people
  • Hennepin
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Hennepin have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hennepin
    • Hennepin is located in Putnam County
    • Population from the 2020 Census: 701 people
    • Jump to TripAdvisor's Tourism page for Hennepin <2>
  • Ladd
    (8 miles [12.9 km] to the north)
    • Jump to our Gazetteer entry for Ladd
    • Ladd is located in Bureau County
    • Population from the 2020 Census: 1,184 people
    • Jump to TripAdvisor's Tourism page for Ladd <2>
  • Continue List   (14 more) ...
    • Lowell
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Lowell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lowell
      • Lowell is located in La Salle County
    • Seatonville
      (8 miles [12.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Seatonville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Seatonville
      • Seatonville is located in Bureau County
      • Population from the 2020 Census: 293 people
      • Jump to TripAdvisor's Tourism page for Seatonville <2>
    • Magnolia
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Magnolia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Magnolia
      • Magnolia is located in Putnam County
      • Population from the 2020 Census: 244 people
      • Jump to TripAdvisor's Tourism page for Magnolia <2>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Standard. See our List of 1890's Communities around Standard.

Unfortunately, we don't know of a website for Standard. If you can help, please contact us through our Feedback Page.

The official website for State of Illinois: https://illinois.gov

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Standard) to Point B.Our distance measurements begin at a specific point in Standard. The point we use is located at these GPS coordinates - Latitude: 41.2569, Longitude: -89.1783    
<5>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Standard, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024