RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Illinois >> Knox County >> Rio >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Illinois


The Commemorative Quarter for Illinois







TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Rio. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Rio.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Rio - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 66 communities listed:

  • Abingdon
    (21 miles [33.8 km] to the south)
  • Aledo
    (19 miles [30.6 km] to the west)
    • Note: The GPS coordinates that we are using for Aledo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Aledo
    • Aledo is located in Mercer County
    • Population from the 2020 Census: 3,383 people
    • Jump to TripAdvisor's Tourism page for Aledo <2>
  • Alexis
    (8 miles [12.9 km] to the west)
  • Alpha
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Alpha have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Alpha
    • Alpha is located in Henry County
    • Population from the 2020 Census: 626 people
    • Jump to TripAdvisor's Tourism page for Alpha <2>
  • Altona
    (12 miles [19.3 km] to the east)
  • Andalusia
    (28 miles [45.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Andalusia have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Andalusia
    • Andalusia is located in Rock Island County
    • Population from the 2020 Census: 1,140 people
    • Jump to TripAdvisor's Tourism page for Andalusia <2>
  • Andover
    (14 miles [22.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Andover have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Andover
    • Andover is located in Henry County
    • Population from the 2020 Census: 565 people
    • Jump to TripAdvisor's Tourism page for Andover <2>
  • Atkinson
    (29 miles [46.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Atkinson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Atkinson
    • Atkinson is located in Henry County
    • Population from the 2020 Census: 955 people
    • Jump to TripAdvisor's Tourism page for Atkinson <2>
  • Avon
    (30 miles [48.3 km] to the south)
    • Note: The GPS coordinates that we are using for Avon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Avon
    • Avon is located in Fulton County
    • Population from the 2020 Census: 699 people
    • Jump to TripAdvisor's Tourism page for Avon <2>
  • Barstow
    (28 miles [45.1 km] to the north)
  • Berwick
    (22 miles [35.4 km] to the south)
    • Note: The GPS coordinates that we are using for Berwick have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Berwick
    • Berwick is located in Warren County
    • Jump to TripAdvisor's Tourism page for Berwick <2>
  • Bettendorf
    (30 miles [48.3 km] to the north)
  • Bishop Hill
    (15 miles [24.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bishop Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bishop Hill
    • Bishop Hill is located in Henry County
    • Population from the 2020 Census: 121 people
    • Jump to TripAdvisor's Tourism page for Bishop Hill <2>
  • Buffalo Prairie
    (28 miles [45.1 km] to the northwest)
  • Buffalo
    (30 miles [48.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Buffalo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Buffalo
    • Buffalo is located in Scott County (IA)
    • Population from the 2020 Census: 1,257 people
    • Jump to TripAdvisor's Tourism page for Buffalo <2>
  • Cambridge
    (17 miles [27.4 km] to the northeast)
  • Cameron
    (16 miles [25.7 km] to the south)
  • Carbon Cliff
    (26 miles [41.8 km] to the north)
    • Note: The GPS coordinates that we are using for Carbon Cliff have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Carbon Cliff
    • Carbon Cliff is located in Rock Island County
    • Population from the 2020 Census: 1,932 people
    • Jump to TripAdvisor's Tourism page for Carbon Cliff <2>
  • Coal Valley
    (23 miles [37 km] to the north)
    • Note: The GPS coordinates that we are using for Coal Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Coal Valley
    • Coal Valley is located in Rock Island County
    • Population from the 2020 Census: 3,719 people
    • Jump to TripAdvisor's Tourism page for Coal Valley <2>
  • Colona
    (24 miles [38.6 km] to the north)
    • Note: The GPS coordinates that we are using for Colona have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Colona
    • Colona is located in Henry County
    • Population from the 2020 Census: 5,049 people
    • Jump to TripAdvisor's Tourism page for Colona <2>
  • Dahinda
    (19 miles [30.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Dahinda have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dahinda
    • Dahinda is located in Knox County
    • Jump to TripAdvisor's Tourism page for Dahinda <2>
  • Elmira
    (29 miles [46.7 km] to the east)
    • Note: The GPS coordinates that we are using for Elmira have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elmira
    • Elmira is located in Stark County
    • Jump to TripAdvisor's Tourism page for Elmira <2>
  • Galesburg
    (11 miles [17.7 km] to the south)
  • Galva
    (18 miles [29 km] to the east)
  • Geneseo
    (26 miles [41.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Geneseo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Geneseo
    • Geneseo is located in Henry County
    • Population from the 2020 Census: 6,505 people
    • Jump to TripAdvisor's Tourism page for Geneseo <2>
  • Gerlaw
    (13 miles [20.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Gerlaw have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gerlaw
    • Gerlaw is located in Warren County
    • Jump to TripAdvisor's Tourism page for Gerlaw <2>
  • Gilson
    (19 miles [30.6 km] to the southeast)
  • Hampton
    (30 miles [48.3 km] to the north)
    • Note: The GPS coordinates that we are using for Hampton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hampton
    • Hampton is located in Rock Island County
    • Population from the 2020 Census: 1,738 people
    • Jump to TripAdvisor's Tourism page for Hampton <2>
  • Henderson
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Henderson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Henderson
    • Henderson is located in Knox County
    • Population from the 2020 Census: 241 people
    • Jump to TripAdvisor's Tourism page for Henderson <2>
  • Joy
    (25 miles [40.2 km] to the west)
    • Jump to our Gazetteer entry for Joy
    • Joy is located in Mercer County
    • Population from the 2020 Census: 377 people
    • Jump to TripAdvisor's Tourism page for Joy <2>
  • Keithsburg
    (27 miles [43.5 km] to the west)
  • Kewanee
    (26 miles [41.8 km] to the east)
    • Note: The GPS coordinates that we are using for Kewanee have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kewanee
    • Kewanee is located in Henry County
    • Population from the 2020 Census: 12,174 people
    • Jump to TripAdvisor's Tourism page for Kewanee <2>
  • Kirkwood
    (24 miles [38.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Kirkwood have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kirkwood
    • Kirkwood is located in Warren County
    • Population from the 2020 Census: 670 people
    • Jump to TripAdvisor's Tourism page for Kirkwood <2>
  • Knoxville
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Knoxville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Knoxville
    • Knoxville is located in Knox County
    • Population from the 2020 Census: 2,692 people
    • Jump to TripAdvisor's Tourism page for Knoxville <2>
  • La Fayette
    (22 miles [35.4 km] to the east)
    • Note: The GPS coordinates that we are using for La Fayette have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for La Fayette
    • La Fayette is located in Stark County
    • Population from the 2020 Census: 195 people
    • Jump to TripAdvisor's Tourism page for La Fayette <2>
  • Laura
    (27 miles [43.5 km] to the southeast)
  • Little York
    (19 miles [30.6 km] to the west)
    • Note: The GPS coordinates that we are using for Little York have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Little York
    • Little York is located in Warren County
    • Population from the 2020 Census: 304 people
    • Jump to TripAdvisor's Tourism page for Little York <2>
  • London Mills
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for London Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for London Mills
    • London Mills is located in Fulton County
    • Population from the 2020 Census: 367 people
    • Jump to TripAdvisor's Tourism page for London Mills <2>
  • Lynn Center
    (13 miles [20.9 km] to the north)
    • Note: The GPS coordinates that we are using for Lynn Center have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lynn Center
    • Lynn Center is located in Henry County
    • Jump to TripAdvisor's Tourism page for Lynn Center <2>
  • Maquon
    (24 miles [38.6 km] to the southeast)
  • Matherville
    (14 miles [22.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Matherville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Matherville
    • Matherville is located in Mercer County
    • Population from the 2020 Census: 651 people
    • Jump to TripAdvisor's Tourism page for Matherville <2>
  • Milan
    (25 miles [40.2 km] to the north)
    • Jump to our Gazetteer entry for Milan
    • Milan is located in Rock Island County
    • Population from the 2020 Census: 4,945 people
    • Jump to TripAdvisor's Tourism page for Milan <2>
  • Moline
    (28 miles [45.1 km] to the north)
    • Jump to our Gazetteer entry for Moline
    • Moline is located in Rock Island County
    • Population from the 2020 Census: 41,065 people
    • Jump to TripAdvisor's Tourism page for Moline <2>
  • Monmouth
    (18 miles [29 km] to the southwest)
    • Note: The GPS coordinates that we are using for Monmouth have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Monmouth
    • Monmouth is located in Warren County
    • Population from the 2020 Census: 8,801 people
    • Jump to TripAdvisor's Tourism page for Monmouth <2>
  • North Henderson
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for North Henderson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for North Henderson
    • North Henderson is located in Mercer County
    • Population from the 2020 Census: 172 people
    • Jump to TripAdvisor's Tourism page for North Henderson <2>
  • Oneida
    (9 miles [14.5 km] to the east)
  • Oquawka
    (30 miles [48.3 km] to the southwest)
  • Orion
    (16 miles [25.7 km] to the north)
  • Osco
    (17 miles [27.4 km] to the north)
    • Note: The GPS coordinates that we are using for Osco have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Osco
    • Osco is located in Henry County
    • Jump to TripAdvisor's Tourism page for Osco <2>
  • Preemption
    (17 miles [27.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Preemption have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Preemption
    • Preemption is located in Mercer County
    • Jump to TripAdvisor's Tourism page for Preemption <2>
  • Reynolds
    (20 miles [32.2 km] to the northwest)
  • Rock Island
    (28 miles [45.1 km] to the north)
  • Roseville
    (29 miles [46.7 km] to the southwest)
  • Saint Augustine
    (26 miles [41.8 km] to the south)
    • Note: The GPS coordinates that we are using for Saint Augustine have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Saint Augustine
    • Saint Augustine is located in Knox County
    • Population from the 2020 Census: 111 people
    • Jump to TripAdvisor's Tourism page for Saint Augustine <2>
  • Seaton
    (20 miles [32.2 km] to the west)
  • Sherrard
    (15 miles [24.1 km] to the north)
    • Note: The GPS coordinates that we are using for Sherrard have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sherrard
    • Sherrard is located in Mercer County
    • Population from the 2020 Census: 588 people
    • Jump to TripAdvisor's Tourism page for Sherrard <2>
  • Silvis
    (26 miles [41.8 km] to the north)
    • Note: The GPS coordinates that we are using for Silvis have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Silvis
    • Silvis is located in Rock Island County
    • Population from the 2020 Census: 7,473 people
    • Jump to TripAdvisor's Tourism page for Silvis <2>
  • Smithshire
    (29 miles [46.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Smithshire have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Smithshire
    • Smithshire is located in Warren County
    • Jump to TripAdvisor's Tourism page for Smithshire <2>
  • Taylor Ridge
    (23 miles [37 km] to the northwest)
    • Note: The GPS coordinates that we are using for Taylor Ridge have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Taylor Ridge
    • Taylor Ridge is located in Rock Island County
    • Jump to TripAdvisor's Tourism page for Taylor Ridge <2>
  • Toulon
    (27 miles [43.5 km] to the east)
    • Note: The GPS coordinates that we are using for Toulon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Toulon
    • Toulon is located in Stark County
    • Population from the 2020 Census: 1,144 people
    • Jump to TripAdvisor's Tourism page for Toulon <2>
  • Victoria
    (16 miles [25.7 km] to the east)
    • Note: The GPS coordinates that we are using for Victoria have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Victoria
    • Victoria is located in Knox County
    • Population from the 2020 Census: 282 people
    • Jump to TripAdvisor's Tourism page for Victoria <2>
  • Viola
    (11 miles [17.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Viola
    • Viola is located in Mercer County
    • Population from the 2020 Census: 874 people
    • Jump to TripAdvisor's Tourism page for Viola <2>
  • Wataga
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Wataga have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wataga
    • Wataga is located in Knox County
    • Population from the 2020 Census: 773 people
    • Jump to TripAdvisor's Tourism page for Wataga <2>
  • Williamsfield
    (23 miles [37 km] to the southeast)
    • Note: The GPS coordinates that we are using for Williamsfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Williamsfield
    • Williamsfield is located in Knox County
    • Population from the 2020 Census: 538 people
    • Jump to TripAdvisor's Tourism page for Williamsfield <2>
  • Woodhull
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Woodhull have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Woodhull
    • Woodhull is located in Henry County
    • Population from the 2020 Census: 771 people
    • Jump to TripAdvisor's Tourism page for Woodhull <2>
  • Yates City
    (30 miles [48.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Yates City have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Yates City
    • Yates City is located in Knox County
    • Population from the 2020 Census: 641 people
    • Jump to TripAdvisor's Tourism page for Yates City <2>

Unfortunately, we don't know of an official website for Rio. If you can help, please contact us through our Feedback Page.

The official website for State of Illinois: https://illinois.gov

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Rio) to Point B.Our distance measurements begin at a specific point in Rio. The point we use is located at these GPS coordinates - Latitude: 41.1093, Longitude: -90.3990       In this case, the coordinates for Rio have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024