RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Illinois >> La Salle County >> Oglesby >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Illinois

The Commemorative Quarter for Illinois





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Oglesby (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Oglesby. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Oglesby is located in La Salle County.

To see how the shape of Illinois' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of La Salle County: Bureau, DeKalb, Grundy, Kendall, Lee, Livingston, Marshall, Putnam & Woodford.

Below are the counties that are near Oglesby. For each of these counties, we show a sample of those communities that are closest to Oglesby:

  • La Salle County     (The home county of Oglesby)
    • The following are listed by their distance from Oglesby, with the one closest to Oglesby listed first.
    • Deer Park
      (Less than 2 miles to the east)
      • Note: The GPS coordinates that we are using for Deer Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Deer Park
      • Deer Park is located in La Salle County
    • Cedar Point
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Cedar Point have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cedar Point
      • Cedar Point is located in La Salle County
      • Population from the 2020 Census: 251 people
      • Jump to TripAdvisor's Tourism page for Cedar Point <2>
    • La Salle
      (4 miles [6.4 km] to the north)
      • Note: The GPS coordinates that we are using for La Salle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for La Salle
      • La Salle is located in La Salle County
      • Population from the 2020 Census: 8,897 people
      • Jump to TripAdvisor's Tourism page for La Salle <2>
    • North Utica
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for North Utica have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Utica
      • North Utica is located in La Salle County
      • Population from the 2020 Census: 1,333 people
    • Utica
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Utica have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Utica
      • Utica is located in La Salle County
      • Jump to TripAdvisor's Tourism page for Utica <2>
    • Peru
      (4 miles [6.4 km] to the northwest)
    • Vermilionville
      (4 miles [6.4 km] to the southeast)
    • Tonica
      (5 miles [8 km] to the south)
    • Leonore
      (8 miles [12.9 km] to the southeast)
    • Naplate
      (9 miles [14.5 km] to the east)
      • Note: The GPS coordinates that we are using for Naplate have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Naplate
      • Naplate is located in La Salle County
      • Population from the 2020 Census: 465 people
    • Waltham
      (9 miles [14.5 km] to the north)
    • Hitt
      (10 miles [16.1 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Hitt. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Hitt
      • Hitt is located in La Salle County
      • Google driving directions:
      • From your current location to Hitt
      • From Oglesby to Hitt
  • Bureau County
    • The following are listed by their distance from Oglesby, with the one closest to Oglesby listed first.
    • Spring Valley
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for Spring Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spring Valley
      • Spring Valley is located in Bureau County
      • Population from the 2020 Census: 5,065 people
      • Jump to TripAdvisor's Tourism page for Spring Valley <2>
    • Dalzell
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Dalzell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dalzell
      • Dalzell is located in Bureau County
      • Population from the 2020 Census: 653 people
      • Jump to TripAdvisor's Tourism page for Dalzell <2>
    • Ladd
      (10 miles [16.1 km] to the northwest)
    • Ottville
      (10 miles [16.1 km] to the west)
    • Seatonville
      (11 miles [17.7 km] to the northwest)
    • Cherry
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Cherry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cherry
      • Cherry is located in Bureau County
      • Population from the 2020 Census: 448 people
      • Jump to TripAdvisor's Tourism page for Cherry <2>
    • De Pue
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for De Pue have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for De Pue
      • De Pue is located in Bureau County
      • Population from the 2020 Census: 1,665 people
    • Hollowayville
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Hollowayville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hollowayville
      • Hollowayville is located in Bureau County
      • Population from the 2020 Census: 85 people
    • Arlington
      (15 miles [24.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Arlington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Arlington
      • Arlington is located in Bureau County
      • Population from the 2020 Census: 179 people
      • Jump to TripAdvisor's Tourism page for Arlington <2>
    • Bureau Junction
      (15 miles [24.1 km] to the west)
    • Zearing
      (16 miles [25.7 km] to the northwest)
    • Malden
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Malden have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Malden
      • Malden is located in Bureau County
      • Population from the 2020 Census: 338 people
      • Jump to TripAdvisor's Tourism page for Malden <2>
  • DeKalb County
  • Grundy County
  • Kendall County
    • Newark
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Newark have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Newark
      • Newark is located in Kendall County
      • Population from the 2020 Census: 1,029 people
      • Jump to TripAdvisor's Tourism page for Newark <2>
  • Lee County
    • The following are listed by their distance from Oglesby, with the one closest to Oglesby listed first.
    • Radley
      (24 miles [38.6 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Radley. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Radley
      • Radley is located in Lee County
      • Google driving directions:
      • From your current location to Radley
      • From Oglesby to Radley
    • Sublette
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for Sublette have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sublette
      • Sublette is located in Lee County
      • Population from the 2020 Census: 415 people
      • Jump to TripAdvisor's Tourism page for Sublette <2>
    • Compton
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Compton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Compton
      • Compton is located in Lee County
      • Population from the 2020 Census: 279 people
      • Jump to TripAdvisor's Tourism page for Compton <2>
    • East Paw Paw
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for East Paw Paw have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Paw Paw
      • East Paw Paw is located in Lee County
    • Paw Paw
      (27 miles [43.5 km] to the north)
    • West Brooklyn
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for West Brooklyn have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Brooklyn
      • West Brooklyn is located in Lee County
      • Population from the 2020 Census: 131 people
      • Jump to TripAdvisor's Tourism page for West Brooklyn <2>
    • The Burg
      (28 miles [45.1 km] to the north)
  • Livingston County
    • The following are listed by their distance from Oglesby, with the one closest to Oglesby listed first.
    • Munster
      (15 miles [24.1 km] to the southeast)
    • Coalville
      (17 miles [27.4 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Coalville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Coalville
      • Coalville is located in Livingston County
      • Google driving directions:
      • From your current location to Coalville
      • From Oglesby to Coalville
    • Vermilion City
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Vermilion City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vermilion City
      • Vermilion City is located in Livingston County
    • Ancona
      (20 miles [32.2 km] to the southeast)
    • Long Point
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Long Point have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Long Point
      • Long Point is located in Livingston County
      • Population from the 2020 Census: 212 people
      • Jump to TripAdvisor's Tourism page for Long Point <2>
    • Missal
      (21 miles [33.8 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Missal. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Missal
      • Missal is located in Livingston County
      • Google driving directions:
      • From your current location to Missal
      • From Oglesby to Missal
    • Blackstone
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Blackstone have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blackstone
      • Blackstone is located in Livingston County
      • Jump to TripAdvisor's Tourism page for Blackstone <2>
    • Budd
      (26 miles [41.8 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Budd. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Budd
      • Budd is located in Livingston County
      • Google driving directions:
      • From your current location to Budd
      • From Oglesby to Budd
    • Cornell
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cornell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cornell
      • Cornell is located in Livingston County
      • Population from the 2020 Census: 451 people
      • Jump to TripAdvisor's Tourism page for Cornell <2>
    • Flanagan
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Flanagan have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Flanagan
      • Flanagan is located in Livingston County
      • Population from the 2020 Census: 1,057 people
      • Jump to TripAdvisor's Tourism page for Flanagan <2>
    • Sunbury
      (30 miles [48.3 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Sunbury. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sunbury
      • Sunbury is located in Livingston County
      • Google driving directions:
      • From your current location to Sunbury
      • From Oglesby to Sunbury
  • Marshall County
    • The following are listed by their distance from Oglesby, with the one closest to Oglesby listed first.
    • Wenona
      (16 miles [25.7 km] to the south)
      • Note: The GPS coordinates that we are using for Wenona have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wenona
      • Wenona is located in Marshall County
      • Population from the 2020 Census: 926 people
      • Jump to TripAdvisor's Tourism page for Wenona <2>
    • Evans ‑ Historic
      (17 miles [27.4 km] to the south)
    • Varna
      (19 miles [30.6 km] to the southwest)
    • Toluca
      (20 miles [32.2 km] to the south)
    • Henry
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Henry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Henry
      • Henry is located in Marshall County
      • Population from the 2020 Census: 2,230 people
      • Jump to TripAdvisor's Tourism page for Henry <2>
    • La Rose
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for La Rose have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for La Rose
      • La Rose is located in Marshall County
      • Population from the 2020 Census: 127 people
      • Jump to TripAdvisor's Tourism page for La Rose <2>
    • Lacon
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lacon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lacon
      • Lacon is located in Marshall County
      • Population from the 2020 Census: 1,713 people
      • Jump to TripAdvisor's Tourism page for Lacon <2>
    • Sparland
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Sparland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sparland
      • Sparland is located in Marshall County
      • Population from the 2020 Census: 357 people
      • Jump to TripAdvisor's Tourism page for Sparland <2>
    • Hopewell
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Hopewell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hopewell
      • Hopewell is located in Marshall County
      • Population from the 2020 Census: 394 people
  • Putnam County
    • The following are listed by their distance from Oglesby, with the one closest to Oglesby listed first.
    • Standard
      (6 miles [9.7 km] to the southwest)
    • Mount Palatine
      (8 miles [12.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Mount Palatine have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Palatine
      • Mount Palatine is located in Putnam County
    • Granville
      (8 miles [12.9 km] to the west)
    • Mark
      (9 miles [14.5 km] to the west)
      • Note: The GPS coordinates that we are using for Mark have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mark
      • Mark is located in Putnam County
      • Population from the 2020 Census: 546 people
      • Jump to TripAdvisor's Tourism page for Mark <2>
    • McNabb
      (11 miles [17.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for McNabb have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McNabb
      • McNabb is located in Putnam County
      • Population from the 2020 Census: 258 people
      • Jump to TripAdvisor's Tourism page for McNabb <2>
    • Hennepin
      (13 miles [20.9 km] to the west)
      • Note: The GPS coordinates that we are using for Hennepin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hennepin
      • Hennepin is located in Putnam County
      • Population from the 2020 Census: 701 people
      • Jump to TripAdvisor's Tourism page for Hennepin <2>
    • Magnolia
      (14 miles [22.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Magnolia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Magnolia
      • Magnolia is located in Putnam County
      • Population from the 2020 Census: 244 people
      • Jump to TripAdvisor's Tourism page for Magnolia <2>
    • Putnam
      (18 miles [29 km] to the southwest)
  • Woodford County
    • The following are listed by their distance from Oglesby, with the one closest to Oglesby listed first.
    • Minonk
      (27 miles [43.5 km] to the south)
    • Washburn
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Washburn have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Washburn
      • Washburn is located in Woodford County
      • Population from the 2020 Census: 1,064 people
      • Jump to TripAdvisor's Tourism page for Washburn <2>
    • Benson
      (30 miles [48.3 km] to the south)

For an expanded list of the communities that are closest to Oglesby, see our County-by-County Page for Oglesby.

Cemeteries Near Oglesby ...

Below are cemeteries that are in the vicinity of Oglesby.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Oglesby covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Oglesby, with the one closest to Oglesby listed first.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that in 1895, Oglesby had a post office and railroad service. In 2020, Oglesby had a population of 3,526 people.

These communities are listed based on their distance from Oglesby, with the one closest to Oglesby listed first.

  • Deer Park
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for Deer Park have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Deer Park
    • Deer Park is located in La Salle County
  • La Salle
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for La Salle have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for La Salle
    • La Salle is located in La Salle County
    • Population from the 2020 Census: 8,897 people
    • Jump to TripAdvisor's Tourism page for La Salle <2>
  • Lowell
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Lowell have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lowell
    • Lowell is located in La Salle County
  • Vermilionville
    (4 miles [6.4 km] to the southeast)
  • Utica
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Utica have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Utica
    • Utica is located in La Salle County
    • Jump to TripAdvisor's Tourism page for Utica <2>
  • Peru
    (4 miles [6.4 km] to the northwest)
  • Tonica
    (5 miles [8 km] to the south)
  • Ticona
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Ticona have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ticona
    • Ticona is located in La Salle County
  • Spring Valley
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Spring Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spring Valley
    • Spring Valley is located in Bureau County
    • Population from the 2020 Census: 5,065 people
    • Jump to TripAdvisor's Tourism page for Spring Valley <2>
  • Granville
    (8 miles [12.9 km] to the west)
  • Mount Palatine
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Mount Palatine have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Palatine
    • Mount Palatine is located in Putnam County
  • Leonore
    (8 miles [12.9 km] to the southeast)
  • Continue List   (15 more) ...
    • Farm Ridge
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Farm Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Farm Ridge
      • Farm Ridge is located in La Salle County
    • Dimmick
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for Dimmick have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dimmick
      • Dimmick is located in La Salle County
    • Lostant
      (10 miles [16.1 km] to the south)

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Oglesby. See our List of 1890's Communities around Oglesby.

Newspapers Published in Oglesby ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 197 newspapers that have been published in the area around Oglesby.

Although we're unaware of any newspapers that were published in the immediate area of Oglesby, there are papers which were published within 27 miles [43.5 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Oglesby.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Oglesby:

Unfortunately, we don't know of a website for Oglesby. If you can help, please contact us through our Feedback Page.

The official website for La Salle County: www.lasallecounty.org/

The official website for State of Illinois: https://illinois.gov

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Oglesby, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Oglesby) to Point B.Our distance measurements begin at a specific point in Oglesby. The point we use is located at these GPS coordinates - Latitude: 41.2964, Longitude: -89.0625    









 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 13 Jul 2025