|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Liberty in the Atlas, the following communities of the 1890's would have been found near the current location of Liberty. The following communities are listed based on their distance, with the one closest to Liberty listed first.
- Ledford
(Less than 2 miles to the southwest)
- Harrisburg
(Less than 2 miles to the northeast)
- Carrier Mills
(4 miles [6.4 km] to the southwest)
- Mitchellsville
(5 miles [8 km] to the south)
- Somerset
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Somerset have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Somerset
- Somerset is located in Saline County
- Raleigh
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Raleigh have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raleigh
- Raleigh is located in Saline County
- Population from the 2020 Census: 328 people
- Jump to TripAdvisor's Tourism page for Raleigh <2>
- Galatia
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Galatia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galatia
- Galatia is located in Saline County
- Population from the 2020 Census: 868 people
- Jump to TripAdvisor's Tourism page for Galatia <2>
- Eldorado
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Eldorado have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eldorado
- Eldorado is located in Saline County
- Population from the 2020 Census: 3,837 people
- Jump to TripAdvisor's Tourism page for Eldorado <2>
- Oak
(11 miles [17.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Oak. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Oak
- Oak is located in Pope County
- Google driving directions:
- From your current location to Oak
- From Liberty to Oak
- Long Branch
(11 miles [17.7 km] to the north)
- Attila
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Attila have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Attila
- Attila is located in Williamson County
- Equality
(12 miles [19.3 km] to the east)
- Crab Orchard
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Crab Orchard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crab Orchard
- Crab Orchard is located in Williamson County
- McCormick
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for McCormick. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for McCormick
- McCormick is located in Pope County
- Google driving directions:
- From your current location to McCormick
- From Liberty to McCormick
- Hartsville
(13 miles [20.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Hartsville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hartsville
- Hartsville is located in Pope County
- Google driving directions:
- From your current location to Hartsville
- From Liberty to Hartsville
- Kedron
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Kedron have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kedron
- Kedron is located in Gallatin County
- West End
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for West End have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West End
- West End is located in Saline County
- Locust Grove ‑ Historic
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Locust Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Locust Grove
- Locust Grove is located in Franklin County
- Corinth
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Corinth have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Corinth
- Corinth is located in Williamson County
- New Burnside
(14 miles [22.5 km] to the southwest)
- Texas City
(14 miles [22.5 km] to the northeast)
- Walpole
(14 miles [22.5 km] to the north)
- Eddyville
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Eddyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eddyville
- Eddyville is located in Pope County
- Population from the 2020 Census: 97 people
- Jump to TripAdvisor's Tourism page for Eddyville <2>
- Leamington
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Leamington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leamington
- Leamington is located in Gallatin County
- Lawler
(15 miles [24.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Lawler. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lawler
- Lawler is located in Gallatin County
- Google driving directions:
- From your current location to Lawler
- From Liberty to Lawler
- Elba
(15 miles [24.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Elba. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Elba
- Elba is located in Gallatin County
- Google driving directions:
- From your current location to Elba
- From Liberty to Elba
- Broughton
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Broughton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Broughton
- Broughton is located in Hamilton County
- Population from the 2020 Census: 185 people
- Jump to TripAdvisor's Tourism page for Broughton <2>
- New Dennison
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for New Dennison have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Dennison
- New Dennison is located in Williamson County
Off-the-Road Links ...
The official website for State of Illinois: https://illinois.gov
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Liberty, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|