Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Kingston in the Atlas, the following communities of the 1890's would have been found near the current location of Kingston. The following communities are listed based on their distance, with the one closest to Kingston listed first.
- Chestline
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Chestline have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chestline
- Chestline is located in Adams County
- Richfield
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Richfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Richfield
- Richfield is located in Adams County
- Liberty
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liberty
- Liberty is located in Adams County
- Population from the 2020 Census: 500 people
- Jump to TripAdvisor's Tourism page for Liberty <3>
- Fishhook
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Fishhook have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fishhook
- Fishhook is located in Pike County
- Siloam
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Siloam have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Siloam
- Siloam is located in Brown County
- Plainville
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Plainville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainville
- Plainville is located in Adams County
- Population from the 2020 Census: 253 people
- Jump to TripAdvisor's Tourism page for Plainville <3>
- Barry
(8 miles [12.9 km] to the south)
- Hadley
(8 miles [12.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Hadley. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hadley
- Hadley is located in Pike County
- Baylis
(8 miles [12.9 km] to the southeast)
- Benville
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Benville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benville
- Benville is located in Brown County
- Kellerville
(9 miles [14.5 km] to the northeast)
- Jump to our Gazetteer entry for Kellerville
- Kellerville is located in Adams County
- Adams
(9 miles [14.5 km] to the west)
- Jump to our Gazetteer entry for Adams
- Adams is located in Adams County
- Kinderhook
(10 miles [16.1 km] to the southwest)
- Hull
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Hull have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hull
- Hull is located in Pike County
- Population from the 2020 Census: 421 people
- Jump to TripAdvisor's Tourism page for Hull <3>
- Payson
(11 miles [17.7 km] to the west)
- Shinn
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Shinn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shinn
- Shinn is located in Pike County
- New Canton
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for New Canton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Canton
- New Canton is located in Pike County
- Population from the 2020 Census: 338 people
- Morrelville
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Morrelville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morrelville
- Morrelville is located in Brown County
- White Oak Springs ‑ Historic
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for White Oak Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Oak Springs
- White Oak Springs is located in Brown County
- Seehorn
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Seehorn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seehorn
- Seehorn is located in Pike County
- El Dara
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for El Dara have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for El Dara
- El Dara is located in Pike County
- Population from the 2020 Census: 71 people
- Jump to TripAdvisor's Tourism page for El Dara <3>
- Columbus
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Columbus have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Columbus
- Columbus is located in Adams County
- Population from the 2020 Census: 96 people
- Buckhorn
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Buckhorn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckhorn
- Buckhorn is located in Brown County
- Burton
(13 miles [20.9 km] to the northwest)
- Jump to our Gazetteer entry for Burton
- Burton is located in Adams County
- Fall Creek
(14 miles [22.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Fall Creek. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Fall Creek
- Fall Creek is located in Adams County
- Maysville
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Maysville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maysville
- Maysville is located in Pike County
- Fargo
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Fargo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fargo
- Fargo is located in Brown County
Off-the-Road Links ...
The official website for Adams County: www.co.adams.il.us/
The official website for State of Illinois: https://illinois.gov
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Kingston, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |