|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Henderson in the Atlas, the following communities of the 1890's would have been found near the current location of Henderson. The following communities are listed based on their distance, with the one closest to Henderson listed first.
- Gillespie
(2 miles [3.2 km] to the southwest)
- Hornsby
(2 miles [3.2 km] to the east)
- Jump to our Gazetteer entry for Hornsby
- Hornsby is located in Macoupin County
- Dorchester
(6 miles [9.7 km] to the southwest)
- Jump to our Gazetteer entry for Dorchester
- Dorchester is located in Macoupin County
- Population from the 2020 Census: 137 people
- Mount Olive
(6 miles [9.7 km] to the southeast)
- Litchfield
(7 miles [11.3 km] to the east)
- Staunton
(9 miles [14.5 km] to the south)
- Carlinville
(9 miles [14.5 km] to the northwest)
- Barnett
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Barnett have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnett
- Barnett is located in Montgomery County
- Macoupin
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Macoupin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Macoupin
- Macoupin is located in Macoupin County
- Plainview
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Macoupin County
- Jump to TripAdvisor's Tourism page for Plainview <2>
- Bunker Hill
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Bunker Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bunker Hill
- Bunker Hill is located in Macoupin County
- Population from the 2020 Census: 1,664 people
- Jump to TripAdvisor's Tourism page for Bunker Hill <2>
- Walshville
(11 miles [17.7 km] to the southeast)
- Honey Bend
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for Honey Bend
- Honey Bend is located in Montgomery County
- Shop Creek
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Shop Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shop Creek
- Shop Creek is located in Montgomery County
- Atwater
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Atwater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atwater
- Atwater is located in Macoupin County
- Jump to TripAdvisor's Tourism page for Atwater <2>
- Shipman
(13 miles [20.9 km] to the west)
- Anderson
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Anderson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anderson
- Anderson is located in Macoupin County
- Zanesville
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Zanesville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zanesville
- Zanesville is located in Montgomery County
- Comer
(13 miles [20.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Comer. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Comer
- Comer is located in Macoupin County
- Prairietown
(14 miles [22.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Prairietown. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Prairietown
- Prairietown is located in Madison County
- New Douglas
(14 miles [22.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for New Douglas. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for New Douglas
- New Douglas is located in Madison County
- Population from the 2020 Census: 304 people
- Jump to TripAdvisor's Tourism page for New Douglas <2>
- Butler
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Butler have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Butler
- Butler is located in Montgomery County
- Population from the 2020 Census: 163 people
- Jump to TripAdvisor's Tourism page for Butler <2>
- Worden
(15 miles [24.1 km] to the south)
- Enos
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Enos have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Enos
- Enos is located in Macoupin County
- Dorsey
(16 miles [25.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Dorsey. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Dorsey
- Dorsey is located in Madison County
- Jump to TripAdvisor's Tourism page for Dorsey <2>
- Sorento
(16 miles [25.7 km] to the southeast)
- Nilwood
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Nilwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nilwood
- Nilwood is located in Macoupin County
- Population from the 2020 Census: 227 people
- Jump to TripAdvisor's Tourism page for Nilwood <2>
- Raymond
(16 miles [25.7 km] to the northeast)
- McVey
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for McVey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McVey
- McVey is located in Macoupin County
- Reader
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Reader have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reader
- Reader is located in Macoupin County
- Chesterfield
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Chesterfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chesterfield
- Chesterfield is located in Macoupin County
- Population from the 2020 Census: 175 people
- Jump to TripAdvisor's Tourism page for Chesterfield <2>
Off-the-Road Links ...
The official website for State of Illinois: https://illinois.gov
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Henderson, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|