|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Masonic Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Masonic Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Masonic Cemetery. We've listed the following communities based on their distance, with the closest first.
- Cypress
(Less than 2 miles to the north)
- Note: The GPS coordinates that we are using for Cypress have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cypress
- Cypress is located in Johnson County
- Population from the 2020 Census: 236 people
- Jump to TripAdvisor's Tourism page for Cypress <3>
- Perks
(4 miles [6.4 km] to the southwest)
- Karnak
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Karnak have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Karnak
- Karnak is located in Pulaski County
- Population from the 2020 Census: 422 people
- Jump to TripAdvisor's Tourism page for Karnak <3>
- Belknap
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Belknap have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belknap
- Belknap is located in Johnson County
- Population from the 2020 Census: 107 people
- Jump to TripAdvisor's Tourism page for Belknap <3>
- New Grand Chain
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for New Grand Chain have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Grand Chain
- New Grand Chain is located in Pulaski County
- Population from the 2020 Census: 178 people
- Grand Chain
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Grand Chain have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grand Chain
- Grand Chain is located in Pulaski County
- Jump to TripAdvisor's Tourism page for Grand Chain <3>
- Mount Pleasant
(7 miles [11.3 km] to the northwest)
- Jump to our Gazetteer entry for Mount Pleasant
- Mount Pleasant is located in Union County
- Bender ‑ Historic
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Bender have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bender
- Bender is located in Johnson County
- Vienna
(7 miles [11.3 km] to the northeast)
- Buncombe
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Buncombe have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buncombe
- Buncombe is located in Johnson County
- Population from the 2020 Census: 201 people
- Jump to TripAdvisor's Tourism page for Buncombe <3>
- Dongola
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Dongola have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dongola
- Dongola is located in Union County
- Population from the 2020 Census: 672 people
- Jump to TripAdvisor's Tourism page for Dongola <3>
- Ullin
(10 miles [16.1 km] to the southwest)
- Lick Creek
(12 miles [19.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Lick Creek. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lick Creek
- Lick Creek is located in Union County
- Olmsted
(12 miles [19.3 km] to the south)
- Mill Creek
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Mill Creek
- Mill Creek is located in Union County
- Population from the 2020 Census: 64 people
- Joppa
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Joppa have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Joppa
- Joppa is located in Massac County
- Population from the 2020 Census: 298 people
- Jump to TripAdvisor's Tourism page for Joppa <3>
- New Columbia
(13 miles [20.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for New Columbia. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for New Columbia
- New Columbia is located in Massac County
- Wartrace
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Wartrace
- Wartrace is located in Johnson County
- Elco
(14 miles [22.5 km] to the west)
- Pulaski
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Pulaski have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pulaski
- Pulaski is located in Pulaski County
- Population from the 2020 Census: 169 people
- Jump to TripAdvisor's Tourism page for Pulaski <3>
- Bandana
(14 miles [22.5 km] to the south)
- Jump to our Gazetteer entry for Bandana
- Bandana is located in Ballard County (KY)
- Goreville
(14 miles [22.5 km] to the north)
- Anna
(14 miles [22.5 km] to the northwest)
- Dutch Mills
(14 miles [22.5 km] to the west)
- Jump to our Gazetteer entry for Dutch Mills
- Dutch Mills is located in Union County
- Tamms
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Tamms have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tamms
- Tamms is located in Alexander County
- Population from the 2020 Census: 449 people
- Jump to TripAdvisor's Tourism page for Tamms <3>
- Ragland
(15 miles [24.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Ragland. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ragland
- Ragland is located in McCracken County (KY)
- Grantsburg
(15 miles [24.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Grantsburg. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Grantsburg
- Grantsburg is located in Johnson County
- Jump to TripAdvisor's Tourism page for Grantsburg <3>
- Deer Ridge
(15 miles [24.1 km] to the north)
- Jump to our Gazetteer entry for Deer Ridge
- Deer Ridge is located in Johnson County
- Jonesboro
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Jonesboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonesboro
- Jonesboro is located in Union County
- Population from the 2020 Census: 1,677 people
- Jump to TripAdvisor's Tourism page for Jonesboro <3>
Off-the-Road Links ...
The official website for State of Illinois: https://illinois.gov
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Masonic Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.3534, Longitude: -89.0178 In this case, the coordinates for the Masonic Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|