|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Goble Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Goble Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Goble Cemetery. We've listed the following communities based on their distance, with the closest first.
- Hooppole
(2 miles [3.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Hooppole have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hooppole
- Hooppole is located in Henry County
- Population from the 2020 Census: 189 people
- Jump to TripAdvisor's Tourism page for Hooppole <3>
- Yorktown
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for Yorktown
- Yorktown is located in Bureau County
- Annawan
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Annawan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Annawan
- Annawan is located in Henry County
- Population from the 2020 Census: 843 people
- Jump to TripAdvisor's Tourism page for Annawan <3>
- Atkinson
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Atkinson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atkinson
- Atkinson is located in Henry County
- Population from the 2020 Census: 955 people
- Jump to TripAdvisor's Tourism page for Atkinson <3>
- Mineral
(8 miles [12.9 km] to the south)
- New Bedford
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for New Bedford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Bedford
- New Bedford is located in Bureau County
- Population from the 2020 Census: 69 people
- Jump to TripAdvisor's Tourism page for New Bedford <3>
- Tampico
(10 miles [16.1 km] to the northeast)
- Manlius
(11 miles [17.7 km] to the east)
- Prophetstown
(12 miles [19.3 km] to the north)
- Sheffield
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Sheffield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sheffield
- Sheffield is located in Bureau County
- Population from the 2020 Census: 855 people
- Jump to TripAdvisor's Tourism page for Sheffield <3>
- Geneseo
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Geneseo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Geneseo
- Geneseo is located in Henry County
- Population from the 2020 Census: 6,505 people
- Jump to TripAdvisor's Tourism page for Geneseo <3>
- Deer Grove
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Deer Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Deer Grove
- Deer Grove is located in Whiteside County
- Population from the 2020 Census: 45 people
- Jump to TripAdvisor's Tourism page for Deer Grove <3>
- Neponset
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Neponset have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Neponset
- Neponset is located in Bureau County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Neponset <3>
- Buda
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Buda have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buda
- Buda is located in Bureau County
- Population from the 2020 Census: 497 people
- Jump to TripAdvisor's Tourism page for Buda <3>
- Erie
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Erie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Erie
- Erie is located in Whiteside County
- Population from the 2020 Census: 1,482 people
- Jump to TripAdvisor's Tourism page for Erie <3>
- Lyndon
(15 miles [24.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Lyndon. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lyndon
- Lyndon is located in Whiteside County
- Population from the 2020 Census: 604 people
- Jump to TripAdvisor's Tourism page for Lyndon <3>
- Walnut
(16 miles [25.7 km] to the east)
- Hillsdale
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Hillsdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillsdale
- Hillsdale is located in Rock Island County
- Population from the 2020 Census: 502 people
- Jump to TripAdvisor's Tourism page for Hillsdale <3>
- Kewanee
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Kewanee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kewanee
- Kewanee is located in Henry County
- Population from the 2020 Census: 12,174 people
- Jump to TripAdvisor's Tourism page for Kewanee <3>
- Fenton
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Fenton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fenton
- Fenton is located in Whiteside County
- Jump to TripAdvisor's Tourism page for Fenton <3>
- Joslin
(17 miles [27.4 km] to the west)
- Jump to our Gazetteer entry for Joslin
- Joslin is located in Rock Island County
- Wyanet
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Wyanet have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wyanet
- Wyanet is located in Bureau County
- Population from the 2020 Census: 914 people
- Jump to TripAdvisor's Tourism page for Wyanet <3>
- Hickory Hills
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Hickory Hills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hickory Hills
- Hickory Hills is located in Henry County
- Rustic Acres
(19 miles [30.6 km] to the west)
- Jump to our Gazetteer entry for Rustic Acres
- Rustic Acres is located in Rock Island County
- Cambridge
(20 miles [32.2 km] to the southwest)
- Osceola
(20 miles [32.2 km] to the south)
- Jump to our Gazetteer entry for Osceola
- Osceola is located in Stark County
- Newton Corners
(20 miles [32.2 km] to the northwest)
- Jump to our Gazetteer entry for Newton Corners
- Newton Corners is located in Whiteside County
Off-the-Road Links ...
The official website for Henry County: www.henrycty.com/ The official website for State of Illinois: https://illinois.gov
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Goble Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.4934, Longitude: -89.8921 In this case, the coordinates for the Goble Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|