Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Bedford had a post office and no railroad service.
The following communities are listed based on their distance from Bedford, with the one closest to Bedford listed first.
- Montezuma
(Less than 2 miles to the north)
- Note: The GPS coordinates that we are using for Montezuma have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montezuma
- Montezuma is located in Pike County
- Milton
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Milton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milton
- Milton is located in Pike County
- Population from the 2020 Census: 259 people
- Jump to TripAdvisor's Tourism page for Milton <3>
- Pearl
(5 miles [8 km] to the southwest)
- Glasgow
(5 miles [8 km] to the east)
- Florence
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Florence
- Florence is located in Pike County
- Population from the 2020 Census: 36 people
- Patterson
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patterson
- Patterson is located in Greene County
- Jump to TripAdvisor's Tourism page for Patterson <3>
- Detroit
(7 miles [11.3 km] to the northwest)
- Time
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Time have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Time
- Time is located in Pike County
- Population from the 2020 Census: 23 people
- Straut
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Straut. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Straut
- Straut is located in Pike County
- Google driving directions:
- From your current location to Straut
- From Bedford to Straut
- Alsey
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Alsey have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alsey
- Alsey is located in Scott County
- Population from the 2020 Census: 210 people
- Jump to TripAdvisor's Tourism page for Alsey <3>
- Bee Creek
(9 miles [14.5 km] to the south)
- Barrow
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Barrow have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barrow
- Barrow is located in Greene County
- Walkerville
(10 miles [16.1 km] to the southeast)
- Cliffdale
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Cliffdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cliffdale
- Cliffdale is located in Calhoun County
- White Hall
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for White Hall have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Hall
- White Hall is located in Greene County
- Population from the 2020 Census: 2,269 people
- Jump to TripAdvisor's Tourism page for White Hall <3>
- Roodhouse
(11 miles [17.7 km] to the east)
- Nebo
(12 miles [19.3 km] to the southwest)
- Valley City
(12 miles [19.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Valley City. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Valley City
- Valley City is located in Pike County
- Population from the 2020 Census: 14 people
- Google driving directions:
- From your current location to Valley City
- From Bedford to Valley City
- Oxville
(12 miles [19.3 km] to the north)
- Pittsfield
(12 miles [19.3 km] to the northwest)
- Manchester
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Manchester have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manchester
- Manchester is located in Scott County
- Population from the 2020 Census: 269 people
- Jump to TripAdvisor's Tourism page for Manchester <3>
- Exeter
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Exeter have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Exeter
- Exeter is located in Scott County
- Population from the 2020 Census: 60 people
- Martinsburg
(13 miles [20.9 km] to the west)
- Griggsville
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Griggsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Griggsville
- Griggsville is located in Pike County
- Population from the 2020 Census: 1,125 people
- Jump to TripAdvisor's Tourism page for Griggsville <3>
- Riggston
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Riggston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riggston
- Riggston is located in Scott County
Off-the-Road Links ...
The official website for State of Illinois: https://illinois.gov
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Bedford, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |