|  | 
Nearby Communities in the 1890sWe largely built the following list with information that came from an Atlas published by Rand McNally in 1895.  The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available.  Over time, we will continue to add communities that we find during our research. If it applies, we indicate whether a community no longer exists and is now historic.<1> While we didn't find Glencoe in the Atlas, the following communities of the 1890's would have been found near the current location of Glencoe.  The following communities are listed based on their distance, with the one closest to Glencoe listed first. 
Fish Haven(Less than 2 miles to the north)
Garden City(4 miles [6.4 km] to the south)
Saint Charles(7 miles [11.3 km] to the north)
Meadowville(11 miles [17.7 km] to the south)
 
Jump to our Gazetteer entry for MeadowvilleMeadowville is located in Rich County (UT)Bloomington(12 miles [19.3 km] to the north)
Laketown(13 miles [20.9 km] to the south)
Paris(14 miles [22.5 km] to the north)
Dingle(16 miles [25.7 km] to the northeast)
Ovid(19 miles [30.6 km] to the north)
 
Jump to our Gazetteer entry for OvidOvid is located in Bear Lake CountyFranklin(20 miles [32.2 km] to the west)
 
Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for FranklinFranklin is located in Franklin CountyPopulation from the 2020 Census: 857 peopleJump to TripAdvisor's Tourism page for Franklin <2>Cove(20 miles [32.2 km] to the west)
 
Note: The GPS coordinates that we are using for Cove have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for CoveCove is located in Cache County (UT)Richmond(21 miles [33.8 km] to the west)
 
Note: The GPS coordinates that we are using for Richmond have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for RichmondRichmond is located in Cache County (UT)Population from the 2020 Census: 2,899 peopleJump to TripAdvisor's Tourism page for Richmond <2>Border(21 miles [33.8 km] to the northeast)
 
Note: We haven't been able to verify our GPS coordinates for Border.  Although the coordinates have been estimated, they should be in the vicinity.<4>Jump to our Gazetteer entry for BorderBorder is located in Bear Lake CountyLiberty(21 miles [33.8 km] to the north)
 
Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for LibertyLiberty is located in Bear Lake CountyMontpelier(22 miles [35.4 km] to the north)
Cokeville(23 miles [37 km] to the east)
Lewiston(23 miles [37 km] to the west)
 
Jump to our Gazetteer entry for LewistonLewiston is located in Cache County (UT)Population from the 2020 Census: 1,780 peopleFormer names for Lewiston:Cub HillPoverty FlatJump to TripAdvisor's Tourism page for Lewiston <2>Smithfield(24 miles [38.6 km] to the southwest)
Preston(24 miles [38.6 km] to the west)
 
Note: The GPS coordinates that we are using for Preston have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for PrestonPreston is located in Franklin CountyPopulation from the 2020 Census: 5,678 peopleJump to TripAdvisor's Tourism page for Preston <2>Hyde Park(25 miles [40.2 km] to the southwest)
Randolph(26 miles [41.8 km] to the southeast)
 
Note: The GPS coordinates that we are using for Randolph have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for RandolphRandolph is located in Rich County (UT)Population from the 2020 Census: 500 peopleJump to TripAdvisor's Tourism page for Randolph <2>Trenton(28 miles [45.1 km] to the west)
Logan(28 miles [45.1 km] to the southwest)
 
Jump to our Gazetteer entry for LoganLogan is located in Cache County (UT)Population from the 2020 Census: 51,680 peopleFormer name for Logan:Fort LoganLogan has also been known as:Logan CityJump to TripAdvisor's Tourism page for Logan <2>Anderson(28 miles [45.1 km] to the west)
 
Note: The GPS coordinates that we are using for Anderson have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for AndersonAnderson is located in Franklin CountyProvidence(29 miles [46.7 km] to the southwest)
 
Note: The GPS coordinates that we are using for Providence have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for ProvidenceProvidence is located in Cache County (UT)Population from the 2020 Census: 8,051 peopleJump to TripAdvisor's Tourism page for Providence <2> 
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists.  However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now.  Unfortunately our sources of data have proven to be unreliable.  If you can provide us with more specific information about Glencoe, please let us know so that we can improve our accuracy. |  | <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |  | <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS).  While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |  | <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates.  That said, we have some confidence that we have placed the marker near the actual location.  A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |  |  |