|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Wiggins Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Wiggins Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Wiggins Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Wiggins
(Less than 2 miles to the west)
- Orchard
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Orchard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orchard
- Orchard is located in Morgan County
- Jump to TripAdvisor's Tourism page for Orchard <2>
- Weldona
(8 miles [12.9 km] to the northeast)
- Log Lane Village
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Log Lane Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Log Lane Village
- Log Lane Village is located in Morgan County
- Population from the 2020 Census: 848 people
- Dearfield ‑ Historic
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Dearfield
- Dearfield is located in Weld County
- Fort Morgan
(13 miles [20.9 km] to the east)
- Hoyt
(15 miles [24.1 km] to the south)
- Jump to our Gazetteer entry for Hoyt
- Hoyt is located in Morgan County
- Roggen
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Roggen have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roggen
- Roggen is located in Weld County
- Jump to TripAdvisor's Tourism page for Roggen <2>
- Twelvemile Corner
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for Twelvemile Corner
- Twelvemile Corner is located in Morgan County
- Comanche ‑ Historic
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Comanche have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Comanche
- Comanche is located in Adams County
- Hardin
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Hardin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hardin
- Hardin is located in Weld County
- Brush
(22 miles [35.4 km] to the east)
- Johnson
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Johnson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johnson
- Johnson is located in Weld County
- Snyder
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Snyder have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Snyder
- Snyder is located in Morgan County
- Jump to TripAdvisor's Tourism page for Snyder <2>
- Keenesburg
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Keenesburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Keenesburg
- Keenesburg is located in Weld County
- Population from the 2020 Census: 1,302 people
- Jump to TripAdvisor's Tourism page for Keenesburg <2>
- Shamrock
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Shamrock have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shamrock
- Shamrock is located in Adams County
- Hillrose
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Hillrose have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillrose
- Hillrose is located in Morgan County
- Population from the 2020 Census: 258 people
- Jump to TripAdvisor's Tourism page for Hillrose <2>
- Raymer
(28 miles [45.1 km] to the north)
- Jump to our Gazetteer entry for Raymer
- Raymer is located in Weld County
- Population from the 2020 Census: 120 people
- Raymer has also been known as:
- New Raymer
- Jump to TripAdvisor's Tourism page for Raymer <2>
- Spanish Village
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Spanish Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spanish Village
- Spanish Village is located in Weld County
- Woodrow
(29 miles [46.7 km] to the southeast)
- Kersey
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Kersey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kersey
- Kersey is located in Weld County
- Population from the 2020 Census: 1,798 people
- Jump to TripAdvisor's Tourism page for Kersey <2>
Off-the-Road Links ...
The official website for State of Colorado: https://www.colorado.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Wiggins Cemetery. The point we use is located at these GPS coordinates - Latitude: 40.2333, Longitude: -104.0500 In this case, the coordinates for the Wiggins Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|