Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Yancy in the Atlas, the following communities of the 1890's would have been found near the current location of Yancy. The following communities are listed based on their distance, with the one closest to Yancy listed first.
- Buck Range
(2 miles [3.2 km] to the northwest)
- Buck Range is located in Howard County
- Jump to our Gazetteer entry for Buck Range
- Columbus
(3 miles [4.8 km] to the south)
- Clow
(4 miles [6.4 km] to the northeast)
- Clow is located in Hempstead County
- Jump to our Gazetteer entry for Clow
- Tollette
(5 miles [8 km] to the west)
- Tollette is located in Howard County
- Jump to our Gazetteer entry for Tollette
- Population from the 2020 Census: 247 people
- Allbrook
(5 miles [8 km] to the southwest)
- Allbrook is located in Howard County
- Jump to our Gazetteer entry for Allbrook
- Ozan
(5 miles [8 km] to the east)
- Ozan is located in Hempstead County
- Jump to our Gazetteer entry for Ozan
- Population from the 2020 Census: 79 people
- Compton ‑ Historic
(6 miles [9.7 km] to the north)
- Compton is located in Hempstead County
- Jump to our Gazetteer entry for Compton
- Saratoga
(7 miles [11.3 km] to the southwest)
- Nashville
(7 miles [11.3 km] to the north)
- Washington
(8 miles [12.9 km] to the southeast)
- Doyle
(8 miles [12.9 km] to the north)
- Doyle is located in Hempstead County
- Jump to our Gazetteer entry for Doyle
- Roy
(13 miles [20.9 km] to the northeast)
- Roy is located in Pike County
- Jump to our Gazetteer entry for Roy
- Millwood
(14 miles [22.5 km] to the southwest)
- Millwood is located in Little River County
- Jump to our Gazetteer entry for Millwood
- De Ann
(14 miles [22.5 km] to the east)
- De Ann is located in Hempstead County
- Jump to our Gazetteer entry for De Ann
- Corinth
(14 miles [22.5 km] to the north)
- Corinth is located in Howard County
- Jump to our Gazetteer entry for Corinth
- Brownstown
(14 miles [22.5 km] to the west)
- Brownstown is located in Sevier County
- Jump to our Gazetteer entry for Brownstown
- Fulton
(15 miles [24.1 km] to the south)
- Fulton is located in Hempstead County
- Jump to our Gazetteer entry for Fulton
- Population from the 2020 Census: 191 people
- Sheppard
(15 miles [24.1 km] to the south)
- Sheppard is located in Hempstead County
- Jump to our Gazetteer entry for Sheppard
- Guernsey
(15 miles [24.1 km] to the southeast)
- Guernsey is located in Hempstead County
- Jump to our Gazetteer entry for Guernsey
- Wallaceburg
(15 miles [24.1 km] to the east)
- Wallaceburg is located in Hempstead County
- Jump to our Gazetteer entry for Wallaceburg
- Center Point
(15 miles [24.1 km] to the northwest)
- Center Point is located in Howard County
- Jump to our Gazetteer entry for Center Point
- Perkins
(16 miles [25.7 km] to the north)
- Perkins is located in Howard County
- Jump to our Gazetteer entry for Perkins
- Hope
(17 miles [27.4 km] to the southeast)
- Murfreesboro
(17 miles [27.4 km] to the northeast)
- Ben Lomond
(17 miles [27.4 km] to the west)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Yancy, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |