Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
Turnip itself is historic and described in the Rand McNally Atlas as having a post office and no railroad service.
The following communities are listed based on their distance from Turnip, with the one closest to Turnip listed first.
- Rose Bud
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Rose Bud. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rose Bud
- Rose Bud is located in White County
- Population from the 2020 Census: 493 people
- Jump to TripAdvisor's Tourism page for Rose Bud <3>
- Romance
(6 miles [9.7 km] to the southwest)
- Yuba
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Yuba. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Yuba
- Yuba is located in Cleburne County
- Floyd
(8 miles [12.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Floyd. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Floyd
- Floyd is located in White County
- Mount Vernon
(9 miles [14.5 km] to the southwest)
- Jump to our Gazetteer entry for Mount Vernon
- Mount Vernon is located in Faulkner County
- Population from the 2020 Census: 149 people
- Sunrise ‑ Historic
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Sunrise have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunrise
- Sunrise is located in White County
- Pangburn
(11 miles [17.7 km] to the northeast)
- Barney
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Barney have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barney
- Barney is located in Faulkner County
- Bristol ‑ Historic
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Bristol have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bristol
- Bristol is located in Faulkner County
- Hiram
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Hiram have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hiram
- Hiram is located in Cleburne County
- Quitman
(12 miles [19.3 km] to the west)
- Heber Springs
(12 miles [19.3 km] to the north)
- Jump to our Gazetteer entry for Heber Springs
- Heber Springs is located in Cleburne County
- Population from the 2020 Census: 6,906 people
- Former name for Heber Springs:
- Sugar Loaf
- Jump to TripAdvisor's Tourism page for Heber Springs <3>
- Enders
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Enders
- Enders is located in Faulkner County
- Antioch
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Antioch have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Antioch
- Antioch is located in White County
- Clay
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Clay. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Clay
- Clay is located in White County
- Enola
(14 miles [22.5 km] to the southwest)
- Jump to our Gazetteer entry for Enola
- Enola is located in Faulkner County
- Population from the 2020 Census: 354 people
- El Paso
(14 miles [22.5 km] to the south)
- Searcy
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Searcy have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Searcy
- Searcy is located in White County
- Population from the 2020 Census: 23,543 people
- Jump to TripAdvisor's Tourism page for Searcy <3>
- McRae
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for McRae have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McRae
- McRae is located in White County
- Population from the 2020 Census: 671 people
- Garner
(17 miles [27.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Garner. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Garner
- Garner is located in White County
- Population from the 2020 Census: 284 people
- Jump to TripAdvisor's Tourism page for Garner <3>
- Shiloh ‑ Historic
(17 miles [27.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Shiloh. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Shiloh
- Shiloh is located in Cleburne County
- Little Red
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Little Red have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Red
- Little Red is located in White County
- Tyler ‑ Historic
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Tyler have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tyler
- Tyler is located in Cleburne County
- Holland
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Holland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holland
- Holland is located in Faulkner County
- Population from the 2020 Census: 586 people
- Beebe
(18 miles [29 km] to the south)
- Higginson
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Higginson have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Higginson
- Higginson is located in White County
- Population from the 2020 Census: 743 people
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Turnip. If you can help, please contact us through our Feedback Page.
The official website for White County: www.whitecountyar.org/
The official website for State of Arkansas: https://portal.arkansas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Turnip, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |