TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Pangburn. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Pangburn.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Pangburn - within 30 miles [48.3 km]<1>.

Unless noted otherwise, the following communities are located in White County.

Our list sorts the communities in alphabetical order. There are 25 communities listed:

Augusta
(28 miles [45.1 km] to the east)
- Jump to our Gazetteer entry for Augusta
- Augusta is located in Woodruff County
- Population from the 2020 Census: 1,929 people
- Jump to TripAdvisor's Tourism page for Augusta <2>
- Google driving directions:
- From your current location to Augusta
- From Pangburn to Augusta
Bald Knob
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for Bald Knob
- Bald Knob is located in White County
- Population from the 2020 Census: 2,868 people
- Jump to TripAdvisor's Tourism page for Bald Knob <2>
- Google driving directions:
- From your current location to Bald Knob
- From Pangburn to Bald Knob
Batesville
(26 miles [41.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Batesville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Batesville
- Batesville is located in Independence County
- Population from the 2020 Census: 10,830 people
- Jump to TripAdvisor's Tourism page for Batesville <2>
- Google driving directions:
- From your current location to Batesville
- From Pangburn to Batesville
Beebe
(24 miles [38.6 km] to the south)
- Jump to our Gazetteer entry for Beebe
- Beebe is located in White County
- Population from the 2020 Census: 8,205 people
- Jump to TripAdvisor's Tourism page for Beebe <2>
- Google driving directions:
- From your current location to Beebe
- From Pangburn to Beebe
Edgemont
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Edgemont have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edgemont
- Edgemont is located in Cleburne County
- Jump to TripAdvisor's Tourism page for Edgemont <2>
El Paso
(25 miles [40.2 km] to the southwest)
- Jump to our Gazetteer entry for El Paso
- El Paso is located in White County
- Jump to TripAdvisor's Tourism page for El Paso <2>
- Google driving directions:
- From your current location to El Paso
- From Pangburn to El Paso
Fairfield Bay
(27 miles [43.5 km] to the northwest)
- Jump to our Gazetteer entry for Fairfield Bay
- Fairfield Bay is located in Van Buren County
- Estimated population in 2015: 2,268 people
- Jump to TripAdvisor's Tourism page for Fairfield Bay <2>
- Google driving directions:
- From your current location to Fairfield Bay
- From Pangburn to Fairfield Bay
Garner
(19 miles [30.6 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Garner. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Garner
- Garner is located in White County
- Population from the 2020 Census: 284 people
- Jump to TripAdvisor's Tourism page for Garner <2>
- Google driving directions:
- From your current location to Garner
- From Pangburn to Garner
Greers Ferry
(21 miles [33.8 km] to the northwest)
- Jump to our Gazetteer entry for Greers Ferry
- Greers Ferry is located in Cleburne County
- Population from the 2020 Census: 860 people
- Jump to TripAdvisor's Tourism page for Greers Ferry <2>
- Google driving directions:
- From your current location to Greers Ferry
- From Pangburn to Greers Ferry
Heber Springs
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Heber Springs
- Heber Springs is located in Cleburne County
- Population from the 2020 Census: 6,906 people
- Former name for Heber Springs:
- Sugar Loaf
- Jump to TripAdvisor's Tourism page for Heber Springs <2>
- Google driving directions:
- From your current location to Heber Springs
- From Pangburn to Heber Springs
Higden
(22 miles [35.4 km] to the northwest)
- Jump to our Gazetteer entry for Higden
- Higden is located in Cleburne County
- Population from the 2020 Census: 122 people
- Jump to TripAdvisor's Tourism page for Higden <2>
- Google driving directions:
- From your current location to Higden
- From Pangburn to Higden
Ida
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Ida have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ida
- Ida is located in Cleburne County
- Jump to TripAdvisor's Tourism page for Ida <2>
Judsonia
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Judsonia have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Judsonia
- Judsonia is located in White County
- Population from the 2020 Census: 1,992 people
- Jump to TripAdvisor's Tourism page for Judsonia <2>
Kensett
(16 miles [25.7 km] to the southeast)
- Jump to our Gazetteer entry for Kensett
- Kensett is located in White County
- Population from the 2020 Census: 1,615 people
- Jump to TripAdvisor's Tourism page for Kensett <2>
- Google driving directions:
- From your current location to Kensett
- From Pangburn to Kensett
Newark
(29 miles [46.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Newark. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Newark
- Newark is located in Independence County
- Population from the 2020 Census: 1,193 people
- Jump to TripAdvisor's Tourism page for Newark <2>
- Google driving directions:
- From your current location to Newark
- From Pangburn to Newark
Oil Trough
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Oil Trough have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oil Trough
- Oil Trough is located in Independence County
- Population from the 2020 Census: 272 people
- Jump to TripAdvisor's Tourism page for Oil Trough <2>
Prim
(23 miles [37 km] to the northwest)
- Jump to our Gazetteer entry for Prim
- Prim is located in Cleburne County
- Jump to TripAdvisor's Tourism page for Prim <2>
- Google driving directions:
- From your current location to Prim
- From Pangburn to Prim
Quitman
(21 miles [33.8 km] to the west)
- Jump to our Gazetteer entry for Quitman
- Quitman is located in Cleburne County
- Population from the 2020 Census: 710 people
- Jump to TripAdvisor's Tourism page for Quitman <2>
- Google driving directions:
- From your current location to Quitman
- From Pangburn to Quitman
Romance
(17 miles [27.4 km] to the southwest)
- Jump to our Gazetteer entry for Romance
- Romance is located in White County
- Jump to TripAdvisor's Tourism page for Romance <2>
- Google driving directions:
- From your current location to Romance
- From Pangburn to Romance
Rose Bud
(15 miles [24.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Rose Bud. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Rose Bud
- Rose Bud is located in White County
- Population from the 2020 Census: 493 people
- Jump to TripAdvisor's Tourism page for Rose Bud <2>
- Google driving directions:
- From your current location to Rose Bud
- From Pangburn to Rose Bud
Russell
(18 miles [29 km] to the east)
- Jump to our Gazetteer entry for Russell
- Russell is located in White County
- Population from the 2020 Census: 216 people
- Jump to TripAdvisor's Tourism page for Russell <2>
- Google driving directions:
- From your current location to Russell
- From Pangburn to Russell
Searcy
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Searcy have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Searcy
- Searcy is located in White County
- Population from the 2020 Census: 23,543 people
- Jump to TripAdvisor's Tourism page for Searcy <2>
Shirley
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Shirley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shirley
- Shirley is located in Van Buren County
- Population from the 2020 Census: 276 people
- Jump to TripAdvisor's Tourism page for Shirley <2>
Tumbling Shoals
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for Tumbling Shoals
- Tumbling Shoals is located in Cleburne County
- Jump to TripAdvisor's Tourism page for Tumbling Shoals <2>
- Google driving directions:
- From your current location to Tumbling Shoals
- From Pangburn to Tumbling Shoals
Ward
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Ward have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ward
- Ward is located in Lonoke County
- Population from the 2020 Census: 5,486 people
- Jump to TripAdvisor's Tourism page for Ward <2>

Off-the-Road Links ...

Unfortunately, we don't know of an official website for Pangburn. If you can help, please contact us through our Feedback Page.

The official website for White County: www.whitecountyar.org/

The official website for State of Arkansas: https://portal.arkansas.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Pangburn) to Point B.Our distance measurements begin at a specific point in Pangburn. The point we use is located at these GPS coordinates - Latitude: 35.4265, Longitude: -91.8367
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.