|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Mount Vernon had a population of 200 people in 1895 with a post office and no railroad service. In 2020, Mount Vernon had a population of 149 people.
The following communities are listed based on their distance from Mount Vernon, with the one closest to Mount Vernon listed first.
- Enola
(4 miles [6.4 km] to the southwest)
- Bristol ‑ Historic
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Bristol have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bristol
- Bristol is located in Faulkner County
- Romance
(4 miles [6.4 km] to the east)
- Barney
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Barney have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barney
- Barney is located in Faulkner County
- El Paso
(7 miles [11.3 km] to the south)
- Rose Bud
(7 miles [11.3 km] to the north)
- Sunrise ‑ Historic
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Sunrise have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunrise
- Sunrise is located in White County
- Holland
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Holland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holland
- Holland is located in Faulkner County
- Population from the 2020 Census: 586 people
- Floyd
(9 miles [14.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Floyd. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Floyd
- Floyd is located in White County
- Google driving directions:
- From your current location to Floyd
- From Mount Vernon to Floyd
- Turnip ‑ Historic
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Turnip have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turnip
- Turnip is located in White County
- Enders
(9 miles [14.5 km] to the northwest)
- Vilonia
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Vilonia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vilonia
- Vilonia is located in Faulkner County
- Population from the 2020 Census: 4,725 people
- Jump to TripAdvisor's Tourism page for Vilonia <3>
- Quitman
(12 miles [19.3 km] to the northwest)
- Antioch
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Antioch have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Antioch
- Antioch is located in White County
- Hamlet
(14 miles [22.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Hamlet. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hamlet
- Hamlet is located in Faulkner County
- Google driving directions:
- From your current location to Hamlet
- From Mount Vernon to Hamlet
- Otto
(14 miles [22.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Otto. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Otto
- Otto is located in Faulkner County
- Google driving directions:
- From your current location to Otto
- From Mount Vernon to Otto
- Yuba
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Yuba. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Yuba
- Yuba is located in Cleburne County
- Google driving directions:
- From your current location to Yuba
- From Mount Vernon to Yuba
- Guy
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Guy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Guy
- Guy is located in Faulkner County
- Population from the 2020 Census: 792 people
- Greenbrier
(14 miles [22.5 km] to the west)
- Linder
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Linder have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linder
- Linder is located in Faulkner County
- Pinnacle Springs ‑ Historic
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Pinnacle Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinnacle Springs
- Pinnacle Springs is located in Faulkner County
- Austin
(17 miles [27.4 km] to the southeast)
- Ward
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Ward have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ward
- Ward is located in Lonoke County
- Population from the 2020 Census: 5,486 people
- Jump to TripAdvisor's Tourism page for Ward <3>
- Beebe
(17 miles [27.4 km] to the southeast)
- Warsaw
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Warsaw have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warsaw
- Warsaw is located in Pulaski County
- Cabot
(18 miles [29 km] to the south)
- McRae
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for McRae have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McRae
- McRae is located in White County
- Population from the 2020 Census: 671 people
- Damascus
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Damascus have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Damascus
- Damascus is located in Van Buren County
- Population from the 2020 Census: 384 people
- Jump to TripAdvisor's Tourism page for Damascus <3>
- Wooster
(18 miles [29 km] to the west)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Mount Vernon. If you can help, please contact us through our Feedback Page. The official website for State of Arkansas: https://portal.arkansas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Mount Vernon, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|