Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Clinton had a population of 176 people in 1895 with a post office and no railroad service. In 2020, Clinton had a population of 2,506 people.
The following communities are listed based on their distance from Clinton, with the one closest to Clinton listed first.
- Choctaw
(4 miles [6.4 km] to the south) - Eglantine
(8 miles [12.9 km] to the east)- Jump to our Gazetteer entry for Eglantine
- Eglantine is located in Van Buren County
- Settlement ‑ Historic
(8 miles [12.9 km] to the northeast)- Note: The GPS coordinates that we are using for Settlement have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Settlement
- Settlement is located in Van Buren County
- Scotland
(9 miles [14.5 km] to the southwest)- Jump to our Gazetteer entry for Scotland
- Scotland is located in Van Buren County
- Jump to TripAdvisor's Tourism page for Scotland <3>
- Bee Branch
(10 miles [16.1 km] to the south)- Note: The GPS coordinates that we are using for Bee Branch have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bee Branch
- Bee Branch is located in Van Buren County
- Morganton
(10 miles [16.1 km] to the southeast) - Claude
(11 miles [17.7 km] to the southwest) - Dennard
(11 miles [17.7 km] to the north)- Jump to our Gazetteer entry for Dennard
- Dennard is located in Van Buren County
- Jump to TripAdvisor's Tourism page for Dennard <3>
- Copeland
(11 miles [17.7 km] to the northwest) - Edge ‑ Historic
(12 miles [19.3 km] to the southwest) - Chalk ‑ Historic
(12 miles [19.3 km] to the east) - Alread
(12 miles [19.3 km] to the west)- Jump to our Gazetteer entry for Alread
- Alread is located in Van Buren County
- Oak Flat ‑ Historic
(13 miles [20.9 km] to the northwest) - Latham
(13 miles [20.9 km] to the west) - Rushing
(14 miles [22.5 km] to the northeast) - Damascus
(15 miles [24.1 km] to the south)- Note: The GPS coordinates that we are using for Damascus have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Damascus
- Damascus is located in Van Buren County
- Population from the 2020 Census: 384 people
- Jump to TripAdvisor's Tourism page for Damascus <3>
- Liberty Springs ‑ Historic
(16 miles [25.7 km] to the southwest)- Note: The GPS coordinates that we are using for Liberty Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liberty Springs
- Liberty Springs is located in Van Buren County
- Leslie
(17 miles [27.4 km] to the north)- Note: The GPS coordinates that we are using for Leslie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leslie
- Leslie is located in Searcy County
- Population from the 2020 Census: 415 people
- Jump to TripAdvisor's Tourism page for Leslie <3>
- Shiloh ‑ Historic
(17 miles [27.4 km] to the east) - Cleveland
(18 miles [29 km] to the southwest)- Note: The GPS coordinates that we are using for Cleveland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cleveland
- Cleveland is located in Conway County
- Jump to TripAdvisor's Tourism page for Cleveland <3>
- Lick Mountain
(18 miles [29 km] to the southwest)- Note: The GPS coordinates that we are using for Lick Mountain have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lick Mountain
- Lick Mountain is located in Conway County
- Martinville
(18 miles [29 km] to the south)- Note: The GPS coordinates that we are using for Martinville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Martinville
- Martinville is located in Faulkner County
- Pinnacle Springs ‑ Historic
(18 miles [29 km] to the south)- Note: The GPS coordinates that we are using for Pinnacle Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinnacle Springs
- Pinnacle Springs is located in Faulkner County
- Guy
(19 miles [30.6 km] to the south) - Quitman
(19 miles [30.6 km] to the southeast)- Jump to our Gazetteer entry for Quitman
- Quitman is located in Cleburne County
- Population from the 2020 Census: 710 people
- Jump to TripAdvisor's Tourism page for Quitman <3>
- Campbell
(19 miles [30.6 km] to the north) - Watts
(19 miles [30.6 km] to the northwest)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Clinton. If you can help, please contact us through our Feedback Page.
The official website for State of Arkansas: https://portal.arkansas.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Clinton, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |