|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hight Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hight Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hight Cemetery. We've listed the following communities based on their distance, with the closest first.
- Cecil
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Cecil have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cecil
- Cecil is located in Franklin County
- Mulberry
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Mulberry have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mulberry
- Mulberry is located in Crawford County
- Population from the 2020 Census: 1,694 people
- Jump to TripAdvisor's Tourism page for Mulberry <3>
- Cravens
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Cravens. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Cravens
- Cravens is located in Franklin County
- Dyer
(7 miles [11.3 km] to the west)
- Dahoma ‑ Historic
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Dahoma have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dahoma
- Dahoma is located in Franklin County
- Webb City
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Webb City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Webb City
- Webb City is located in Franklin County
- Ozark
(9 miles [14.5 km] to the east)
- White Oak
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for White Oak. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for White Oak
- White Oak is located in Franklin County
- Felkner Town
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Felkner Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Felkner Town
- Felkner Town is located in Franklin County
- Donald ‑ Historic
(11 miles [17.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Donald. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Donald
- Donald is located in Franklin County
- Etna
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Etna. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Etna
- Etna is located in Franklin County
- Watalula
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for Watalula
- Watalula is located in Franklin County
- New Town
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Town
- New Town is located in Crawford County
- Ursula
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for Ursula
- Ursula is located in Sebastian County
- Branch
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Branch have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Branch
- Branch is located in Franklin County
- Population from the 2020 Census: 345 people
- Jump to TripAdvisor's Tourism page for Branch <3>
- Alma
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Alma have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alma
- Alma is located in Crawford County
- Population from the 2020 Census: 5,887 people
- Jump to TripAdvisor's Tourism page for Alma <3>
- Kibler
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Kibler have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kibler
- Kibler is located in Crawford County
- Population from the 2020 Census: 1,028 people
- Charleston
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Charleston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Charleston
- Charleston is located in Franklin County
- Population from the 2020 Census: 2,500 people
- Jump to TripAdvisor's Tourism page for Charleston <3>
- Locke
(13 miles [20.9 km] to the north)
- Jump to our Gazetteer entry for Locke
- Locke is located in Crawford County
- Altus
(13 miles [20.9 km] to the east)
- Wiederkehr Village
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Wiederkehr Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wiederkehr Village
- Wiederkehr Village is located in Franklin County
- Population from the 2020 Census: 48 people
- Mountainburg
(13 miles [20.9 km] to the northwest)
- Lavaca
(14 miles [22.5 km] to the southwest)
- Ratcliff
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Ratcliff have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ratcliff
- Ratcliff is located in Logan County
- Population from the 2020 Census: 182 people
- Jump to TripAdvisor's Tourism page for Ratcliff <3>
- Caulksville
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Caulksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caulksville
- Caulksville is located in Logan County
- Population from the 2020 Census: 208 people
- Denning
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Denning have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Denning
- Denning is located in Franklin County
- Population from the 2020 Census: 250 people
- Concord
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Concord
- Concord is located in Crawford County
Off-the-Road Links ...
The official website for State of Arkansas: https://portal.arkansas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hight Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.4870, Longitude: -94.0044 In this case, the coordinates for the Hight Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|