Welcome to Burton ...
Burton is located in Mississippi County<1>.
Burton is 250 feet [76 m] above sea level.<2>.
Time Zone: Burton lies in the Central Time Zone (CST/CDT) and observes daylight saving time
Area Codes for Burton: 870 & 327<3>
Communities Also Named Burton ...
Using our Gazetteer, we found that there are 34 communities that are also named Burton - they are located in Arizona, British Columbia, California, Georgia, Idaho, Illinois, Indiana (2), Kentucky, Louisiana, Michigan (2), Mississippi, Missouri, Montana, Nebraska, New Brunswick, North Carolina, Ohio, Oklahoma (2), Ontario (2), Prince Edward Island, South Carolina, South Dakota, Tennessee (2), Texas, Utah, Washington (2), West Virginia and Wisconsin.
For more information, see our Tidbits & Trivia Page for Burton.
Communities near Burton ...
We have created a list of 10 communities that are near Burton.
- Mengelwood
(19 miles [30.6 km] to the northeast)
- Jump to our Gazetteer entry for Mengelwood
- Mengelwood is located in Dyer County (TN)
- Estimated population in 2014: 656,861 people
- Osceola
(16 miles [25.7 km] to the south)
- Manila
(17 miles [27.4 km] to the west)
- Gosnell
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Gosnell have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gosnell
- Gosnell is located in Mississippi County
- Population from the 2020 Census: 3,066 people
- Daniels Point Landing
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Daniels Point Landing have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Daniels Point Landing
- Daniels Point Landing is located in Lauderdale County (TN)
- Estimated population in 2014: 2,874 people
- Steele
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Steele have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Steele
- Steele is located in Pemiscot County (MO)
- Population from the 2020 Census: 1,853 people
- Jump to TripAdvisor's Tourism page for Steele <4>
- Luxora
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Luxora have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Luxora
- Luxora is located in Mississippi County
- Population from the 2020 Census: 1,007 people
- Hornersville
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Hornersville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hornersville
- Hornersville is located in Dunklin County (MO)
- Population from the 2020 Census: 586 people
- Cooter
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Cooter have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cooter
- Cooter is located in Pemiscot County (MO)
- Population from the 2020 Census: 397 people
- Jump to TripAdvisor's Tourism page for Cooter <4>
- Holland
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Holland have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holland
- Holland is located in Pemiscot County (MO)
- Population from the 2020 Census: 193 people
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Burton. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Burton.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Burton. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Burton.
We also have a detailed list of newspapers that have been published in the area around Burton. See our Newspapers Page for Burton.
TripAdvisor Tourism Pages for Burton ...
Looking for more information about Burton? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Burton, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Burton.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Burton. If you can help, please contact us through our Feedback Page.
The official website for Mississippi County: www.mcagov.com/
The official website for State of Arkansas: https://portal.arkansas.gov/
Footnotes ...
<1> | If you're interested in how the shape of Arkansas' counties, including Mississippi, have changed over time, we recommend the Atlas of Historical County Boundaries. |
<2> | The elevation is an estimate for the area around Burton - it will be higher in some places and lower in others. |
<3> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 870 code has been Overlayed with the 327 area code. New phone numbers in the Burton area will be assigned with one of these codes: 870 or 327. As a result, placing a call in the Burton area will require 10-digit dialing (where you enter both the area code and then the phone number). |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |