Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Thomas Place in the Atlas, the following communities of the 1890's would have been found near the current location of Thomas Place. The following communities are listed based on their distance, with the one closest to Thomas Place listed first.
- Battleground
(Less than 2 miles to the south)
- Battleground is located in Cullman County
- Jump to our Gazetteer entry for Battleground
- Massey
(3 miles [4.8 km] to the northwest)
- Massey is located in Morgan County
- Jump to our Gazetteer entry for Massey
- Cedar Plains
(3 miles [4.8 km] to the north)
- Cedar Plains is located in Morgan County
- Jump to our Gazetteer entry for Cedar Plains
- Clifty
(4 miles [6.4 km] to the west)
- Clifty is located in Cullman County
- Jump to our Gazetteer entry for Clifty
- Wilhites
(5 miles [8 km] to the east)
- Wilhites is located in Morgan County
- Jump to our Gazetteer entry for Wilhites
- Falkville
(5 miles [8 km] to the northeast)
- Leesdale
(6 miles [9.7 km] to the northeast)
- Leesdale is located in Morgan County
- Jump to our Gazetteer entry for Leesdale
- Jones' Chapel
(8 miles [12.9 km] to the southwest)
- Jones' Chapel is located in Cullman County
- Jump to our Gazetteer entry for Jones' Chapel
- Upshaw
(9 miles [14.5 km] to the west)
- Upshaw is located in Winston County
- Jump to our Gazetteer entry for Upshaw
- Hartselle
(9 miles [14.5 km] to the north)
- Baldwin
(10 miles [16.1 km] to the southeast)
- Baldwin is located in Cullman County
- Jump to our Gazetteer entry for Baldwin
- Neel
(10 miles [16.1 km] to the north)
- Neel is located in Morgan County
- Jump to our Gazetteer entry for Neel
- Nesmith
(11 miles [17.7 km] to the southwest)
- Nesmith is located in Cullman County
- Jump to our Gazetteer entry for Nesmith
- Jesseton
(11 miles [17.7 km] to the northwest)
- Jesseton is located in Lawrence County
- Jump to our Gazetteer entry for Jesseton
- Logan
(12 miles [19.3 km] to the south)
- Oakville
(12 miles [19.3 km] to the northwest)
- Oakville is located in Lawrence County
- Jump to our Gazetteer entry for Oakville
- Addison
(13 miles [20.9 km] to the southwest)
- Cullman
(13 miles [20.9 km] to the southeast)
- Eva
(13 miles [20.9 km] to the east)
- Trimble
(15 miles [24.1 km] to the south)
- Trimble is located in Cullman County
- Jump to our Gazetteer entry for Trimble
- Stringer
(15 miles [24.1 km] to the northeast)
- Stringer is located in Morgan County
- Jump to our Gazetteer entry for Stringer
- Somerville
(15 miles [24.1 km] to the northeast)
- Somerville is located in Morgan County
- Jump to our Gazetteer entry for Somerville
- Population from the 2020 Census: 782 people
- Priceville
(15 miles [24.1 km] to the northeast)
- Crane Hill
(16 miles [25.7 km] to the south)
- Phelan
(16 miles [25.7 km] to the southeast)
- Phelan is located in Cullman County
- Jump to our Gazetteer entry for Phelan
- Simcoe
(16 miles [25.7 km] to the southeast)
- Simcoe is located in Cullman County
- Jump to our Gazetteer entry for Simcoe
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Thomas Place, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |