|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Tarentum in the Atlas, the following communities of the 1890's would have been found near the current location of Tarentum. The following communities are listed based on their distance, with the one closest to Tarentum listed first.
- Tennille
(6 miles [9.7 km] to the east)
- Brundidge
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Brundidge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brundidge
- Brundidge is located in Pike County
- Population from the 2020 Census: 1,872 people
- Jump to TripAdvisor's Tourism page for Brundidge <3>
- Pronto
(8 miles [12.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Pronto. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Pronto
- Pronto is located in Pike County
- Google driving directions:
- From your current location to Pronto
- From Tarentum to Pronto
- Henderson
(11 miles [17.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Henderson. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Henderson
- Henderson is located in Pike County
- Google driving directions:
- From your current location to Henderson
- From Tarentum to Henderson
- Tabernacle
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Tabernacle have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tabernacle
- Tabernacle is located in Coffee County
- Troy
(12 miles [19.3 km] to the northwest)
- Banks
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Banks have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Banks
- Banks is located in Pike County
- Population from the 2020 Census: 168 people
- Jump to TripAdvisor's Tourism page for Banks <3>
- Little Oak
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Little Oak have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Oak
- Little Oak is located in Pike County
- Dillard
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Dillard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dillard
- Dillard is located in Dale County
- Elamville
(13 miles [20.9 km] to the east)
- Buckhorn
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Buckhorn. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Buckhorn
- Buckhorn is located in Pike County
- Google driving directions:
- From your current location to Buckhorn
- From Tarentum to Buckhorn
- Hallsville
(15 miles [24.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Hallsville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hallsville
- Hallsville is located in Pike County
- Google driving directions:
- From your current location to Hallsville
- From Tarentum to Hallsville
- Clintonville
(16 miles [25.7 km] to the south)
- Clio
(16 miles [25.7 km] to the east)
- Catalpa
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Catalpa have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Catalpa
- Catalpa is located in Pike County
- Arguta
(17 miles [27.4 km] to the east)
- Bullock
(18 miles [29 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Bullock. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bullock
- Bullock is located in Crenshaw County
- Google driving directions:
- From your current location to Bullock
- From Tarentum to Bullock
- Ozark
(18 miles [29 km] to the southeast)
- Josie
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Josie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Josie
- Josie is located in Pike County
- Edwardsville
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Edwardsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edwardsville
- Edwardsville is located in Coffee County
- Elba
(19 miles [30.6 km] to the southwest)
- Vidette
(19 miles [30.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Vidette. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Vidette
- Vidette is located in Crenshaw County
- Google driving directions:
- From your current location to Vidette
- From Tarentum to Vidette
- Peacock ‑ Historic
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Peacock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peacock
- Peacock is located in Crenshaw County
- Skipperville
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Skipperville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Skipperville
- Skipperville is located in Dale County
- Linwood
(20 miles [32.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Linwood. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Linwood
- Linwood is located in Pike County
- Google driving directions:
- From your current location to Linwood
- From Tarentum to Linwood
- Wingard
(20 miles [32.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Wingard. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Wingard
- Wingard is located in Pike County
- Google driving directions:
- From your current location to Wingard
- From Tarentum to Wingard
Off-the-Road Links ...
The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Tarentum, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|