RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Alabama >> Pike County >> Shiloh >> Nearby Communities - 1890sIndex...

Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Shiloh in the Atlas, the following communities of the 1890's would have been found near the current location of Shiloh. The following communities are listed based on their distance, with the one closest to Shiloh listed first.

  • Buckhorn
    (Less than 2 miles to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Buckhorn. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Buckhorn
    • Buckhorn is located in Pike County
  • Pronto
    (4 miles [6.4 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Pronto. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Pronto
    • Pronto is located in Pike County
  • Brundidge
    (5 miles [8 km] to the southwest)
  • Banks
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Banks have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Banks
    • Banks is located in Pike County
    • Population from the 2020 Census: 168 people
    • Jump to TripAdvisor's Tourism page for Banks <3>
  • Josie
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Josie have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Josie
    • Josie is located in Pike County
  • Catalpa
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Catalpa have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Catalpa
    • Catalpa is located in Pike County
  • Elamville
    (9 miles [14.5 km] to the southeast)
    • Jump to our Gazetteer entry for Elamville
    • Elamville is located in Barbour County
  • Clio
    (9 miles [14.5 km] to the southeast)
    • Jump to our Gazetteer entry for Clio
    • Clio is located in Barbour County
    • Population from the 2020 Census: 1,268 people
    • Jump to TripAdvisor's Tourism page for Clio <3>
  • Tennille
    (10 miles [16.1 km] to the south)
    • Jump to our Gazetteer entry for Tennille
    • Tennille is located in Pike County
  • Louisville
    (10 miles [16.1 km] to the east)
    • Note: The GPS coordinates that we are using for Louisville have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Louisville
    • Louisville is located in Barbour County
    • Population from the 2020 Census: 457 people
  • Star Hill
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Star Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Star Hill
    • Star Hill is located in Barbour County
  • Perote
    (11 miles [17.7 km] to the north)
    • Note: The GPS coordinates that we are using for Perote have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Perote
    • Perote is located in Bullock County
  • Linwood
    (12 miles [19.3 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Linwood. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Linwood
    • Linwood is located in Pike County
  • Omega
    (13 miles [20.9 km] to the north)
    • Note: The GPS coordinates that we are using for Omega have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Omega
    • Omega is located in Bullock County
  • Troy
    (13 miles [20.9 km] to the west)
    • Jump to our Gazetteer entry for Troy
    • Troy is located in Pike County
    • Population from the 2020 Census: 18,762 people
    • Jump to TripAdvisor's Tourism page for Troy <3>
  • Postoak
    (15 miles [24.1 km] to the north)
    • Jump to our Gazetteer entry for Postoak
    • Postoak is located in Bullock County
  • Inverness
    (16 miles [25.7 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Inverness. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Inverness
    • Inverness is located in Bullock County
  • Arguta
    (16 miles [25.7 km] to the southeast)
    • Jump to our Gazetteer entry for Arguta
    • Arguta is located in Dale County
  • Little Oak
    (18 miles [29 km] to the west)
    • Note: The GPS coordinates that we are using for Little Oak have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Little Oak
    • Little Oak is located in Pike County
  • Dillard
    (18 miles [29 km] to the south)
    • Note: The GPS coordinates that we are using for Dillard have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dillard
    • Dillard is located in Dale County
  • Clayton
    (18 miles [29 km] to the east)
  • Mount Andrew
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Mount Andrew have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Andrew
    • Mount Andrew is located in Barbour County
  • Skipperville
    (19 miles [30.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Skipperville have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Skipperville
    • Skipperville is located in Dale County
  • Pine Grove
    (19 miles [30.6 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for Pine Grove. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Pine Grove
    • Pine Grove is located in Bullock County
  • Orion
    (19 miles [30.6 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Orion. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Orion
    • Orion is located in Pike County

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Shiloh, please let us know so that we can improve our accuracy.
<2>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.