Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Sand Cut in the Atlas, the following communities of the 1890's would have been found near the current location of Sand Cut. The following communities are listed based on their distance, with the one closest to Sand Cut listed first.
- Castleberry
(5 miles [8 km] to the east)
- Castleberry is located in Conecuh County
- Jump to our Gazetteer entry for Castleberry
- Population from the 2020 Census: 527 people
- Range
(6 miles [9.7 km] to the west)
- Range is located in Conecuh County
- Jump to our Gazetteer entry for Range
- Belleville
(7 miles [11.3 km] to the north)
- Belleville is located in Conecuh County
- Jump to our Gazetteer entry for Belleville
- Sparta ‑ Historic
(8 miles [12.9 km] to the east)
- Sparta is located in Conecuh County
- Jump to our Gazetteer entry for Sparta
- Sparta has also been known as:
- Old Sparta
- Wallace
(9 miles [14.5 km] to the southwest)
- Wallace is located in Escambia County
- Jump to our Gazetteer entry for Wallace
- Repton
(9 miles [14.5 km] to the northwest)
- Kirkland
(10 miles [16.1 km] to the southeast)
- Kirkland is located in Escambia County
- Jump to our Gazetteer entry for Kirkland
- Jay Villa ‑ Historic
(10 miles [16.1 km] to the east)
- Jay Villa is located in Conecuh County
- Jump to our Gazetteer entry for Jay Villa
- Bermuda
(12 miles [19.3 km] to the north)
- Bermuda is located in Conecuh County
- Jump to our Gazetteer entry for Bermuda
- Evergreen
(12 miles [19.3 km] to the northeast)
- Hammac
(14 miles [22.5 km] to the southwest)
- Hammac is located in Escambia County
- Jump to our Gazetteer entry for Hammac
- Brewton
(14 miles [22.5 km] to the south)
- Burnt Corn
(16 miles [25.7 km] to the north)
- Burnt Corn is located in Monroe County
- Jump to our Gazetteer entry for Burnt Corn
- Boykin
(18 miles [29 km] to the southeast)
- Boykin is located in Escambia County
- Jump to our Gazetteer entry for Boykin
- Monroeville
(18 miles [29 km] to the northwest)
- Wilcox
(19 miles [30.6 km] to the northeast)
- Wilcox is located in Conecuh County
- Jump to our Gazetteer entry for Wilcox
- Bowles
(19 miles [30.6 km] to the northeast)
- Bowles is located in Conecuh County
- Jump to our Gazetteer entry for Bowles
- Pollard
(20 miles [32.2 km] to the south)
- Pollard is located in Escambia County
- Jump to our Gazetteer entry for Pollard
- Population from the 2020 Census: 132 people
- Brooklyn
(20 miles [32.2 km] to the east)
- Brooklyn is located in Conecuh County
- Jump to our Gazetteer entry for Brooklyn
- Roberts
(21 miles [33.8 km] to the southeast)
- Roberts is located in Escambia County
- Jump to our Gazetteer entry for Roberts
- Mount Union
(21 miles [33.8 km] to the east)
- Mount Union is located in Conecuh County
- Jump to our Gazetteer entry for Mount Union
- Axle
(22 miles [35.4 km] to the northwest)
- Axle is located in Monroe County
- Jump to our Gazetteer entry for Axle
- Flomaton
(23 miles [37 km] to the south)
- Garland
(24 miles [38.6 km] to the northeast)
- Garland is located in Butler County
- Jump to our Gazetteer entry for Garland
- Skinnerton
(24 miles [38.6 km] to the north)
- Skinnerton is located in Conecuh County
- Jump to our Gazetteer entry for Skinnerton
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Sand Cut, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |