Census Data for River Falls ...
The most recent Census Estimate<1> was for 2019 and it gave River Falls a population of 535 people.
The last Decennial Census<2> was in 2010, which gave River Falls a population of 526 people.
The town of River Falls is located in Covington County. The 2010 Census gave Covington County; a population of 37,765 people. This means that River Falls had 1.39% of the county's total population, making it Covington's 5th most populous community.
At the same time, Alabama had a population of 4,779,736 people, meaning that River Falls had 0.01% of the total population of Alabama - making it the state's 331st most populous community.
The 2010 Census shows that the sampling area for River Falls has a total area of 7.1 square miles [18.4 km²]. Of this total, 6.84 square miles [17.7 km²] is land, with the balance (3.68%) being water (0.26 square miles [0.7 km²]).
Covington County has a land area of 1,030 square miles [2,668.9 km²]. At 6.84 square miles [17.7 km²], River Falls has 0.66% of the county's total land area.
- Continue Reading ...
- When the Census Bureau conducts a census for a town like River Falls, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the town.
- Things like population, area and housing for River Falls reflect the sampling area. Since the shape of the sampling area and the actual boundaries of River Falls might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
- Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
- Lat: 31° 21' 8" (or 31.35°)
- Lon: -86° 32' 40" (or -86.54°)
- More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, River Falls had 262 Housing Units<3> and with its population of 526 people, this averages 2.01 people per Housing Unit.
- Continue Reading ...
- The 2010 Census shows River Falls had a land area of 6.84 square miles [17.7 km²]. This translates to 36.92 Housing Units per square mile [14.26 housing units/km²].
- From the Census of 2000: River Falls had 307 Housing Units, a population of 616 people and a land area of 6.93 square miles [17.9 km²]. This gives a density of 2.01 people per Housing Unit and 43.15 Housing Units per square mile [16.66 housing units/km²].
- Note: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2010 Census and the 2000 Census, there were changes in the sampling area for River Falls and you need to be careful when comparing numbers between the censuses. More information about the nature of these the changes can be found in the section called Census-to-Census Observations ... (see below).
Covington County ...
The community of River Falls is located in Covington County<4>.
The county had a population of 37,765 people at the 2010 Census. With it's population of 526 people, River Falls represented 1.39% of the county's total.
In addition, where the town of River Falls has a population density of 74.1 people per square mile [28.62 people/km²], Covington County averages 36.65 people per square mile [14.15 people/km²].
For more information, please visit our Census Page for Covington County.
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for River Falls, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of River Falls. It's important to note that from one Census to the next, the shape and location of the polygon can change.
- Continue Reading ...
- Although we don't have specific information about the shape of the polygon for River Falls or how it changed has over time, there is some information that can give us some hints. For example, since the shape of the sampling area is directly related to the shape of the polygon, any change to area probably indicates a new shape for the polygon.
- If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
While generally coinciding with the GPS location (latitude/longitude) of River Falls, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for River Falls.
- Continue Reading ...
- For the 2010 Census, the location was given as:
- Lat: 31.352397° (or 31°21'8" N)
- Lon: -86.544609° (or -86°32'40" W)
- For the 2000 Census, the location given was:
- Lat: 31.351948° (or 31°21'7" N)
- Lon: -86.536680° (or -86°32'12" W)
- The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 2,474 feet to the west<5> of the location that was used in the 2000 Census.
- The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2407223) to River Falls. This identifier also marks a GPS point on the map, and that point lies within the boundaries of River Falls. The GNIS point has been mapped to the latitude/longitude:
- Lat: 31.352439° (or 31°21'8" N)
- Lon: -86.541127° (or -86°32'28" W)
- The GPS location given for the 2010 Census lies 1,084 feet to the west<6> of the point given by the GNIS for River Falls. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for River Falls.
Miscellaneous Information for River Falls ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Covington County or the town of River Falls:
- The GNIS Codes ...
- The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to River Falls:
- GNIS ID for River Falls: 2407223
- GNIS ID for Covington County: 161545
- GNIS ID for State of Alabama: 1779775
- Misc. Census Codes ...
- River Falls is located in Census Region #3 (the South Region) and Division #6 (the East South-Central Division).
- The US Postal Service ZIP Code ...
- While some people have used a ZIP code to identify a community, the purpose of the ZIP code was to make mail delivery more efficient by grouping addresses together. Although the ZIP Code doesn't specifically identify a town like River Falls, it does identify addresses that are in (or near) River Falls. It's important to remember that the boundaries of a ZIP Code can be changed, re-assigned or overlapped with other ZIP Codes.
- The ZIP code for River Falls:36476<7>
- Census ZCTA Codes ...
- The US Census Bureau created statistical entities that they call ZIP Code Tabulation Areas (ZCTAs) and these ZCTAs are frequently confused with the ZIP codes that come from the US Postal Service (USPS).
- ZCTAs were first created for the 2000 Census and at that time, they were based upon the USPS ZIP codes. While largely covering the same areas, the boundaries of a ZCTA do not necessarily match the boundaries of a postal ZIP code with the same number. For example, while a postal ZIP code can cross a county or state line, a Census ZCTA can not. They should be treated as separate entities with no correlation between them.
For more information about the various Federal identification codes, please visit our Misc Page for River Falls.
Other Roadside Stops ...
Visit our Community Index for Alabama
About Covington County
Off-the-Road Links ...
Unfortunately, we don't know of a website for River Falls. If you can help, please contact us through our Feedback Page.
The official website for State of Alabama: https://www.alabama.gov/
The official website of the U.S. Census Bureau
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
|<1>||Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2019.|
|<2>||Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.|
|<3>||A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).|
|<4>||If you're interested in how the shape of Alabama's counties, including Covington, have changed over time, we recommend the Atlas of Historical County Boundaries.|
|<5>||The calculated bearing (or angle) to the 2010 Census location is 86 degrees and a distance of 2,474 feet.|
|<6>||The calculated bearing (or angle) to the GNIS point is 90 degrees and a distance of 1,084 feet.|
|<7>||When looking for a ZIP Code, whether River Falls or elsewhere, it's always best to check the website of the United States Postal Service (USPS).|