Census Data for Repton ...
The most recent Census Estimate<1> was for 2019 and it gave Repton a population of 258 people.
The last Decennial Census<2> was in 2010, which gave Repton a population of 282 people.
The town of Repton is located in Conecuh County. The 2010 Census gave Conecuh County; a population of 13,228 people. This means that Repton had 2.13% of the county's total population, making it Conecuh's 3rd most populous community.
At the same time, Alabama had a population of 4,779,736 people.
The 2010 Census shows that the sampling area for Repton has a total area of 0.96 square miles [2.5 km²]. Of this total, a small amount of the area is covered by water (0 square miles [0 km²]).
Conecuh County has a land area of 850 square miles [2,201.9 km²]. At 0.96 square miles [2.5 km²], Repton has 0.11% of the county's total land area.
- Continue Reading ...
- When the Census Bureau conducts a census for a town like Repton, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the town.
- Things like population, area and housing for Repton reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Repton might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
- Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
- Lat: 31° 24' 34" (or 31.41°)
- Lon: -87° 14' 20" (or -87.24°)
- More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Repton had 140 Housing Units<3> and with its population of 282 people, this averages 2.01 people per Housing Unit.
- Continue Reading ...
- The 2010 Census shows Repton had a land area of 0.96 square miles [2.5 km²]. This translates to 145.2 Housing Units per square mile [56.1 housing units/km²].
- From the Census of 2000: Repton had 129 Housing Units, a population of 280 people and a land area of 0.52 square miles [1.3 km²]. This gives a density of 2.17 people per Housing Unit and 247.6 Housing Units per square mile [95.6 housing units/km²].
- Note: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2010 and the 2000 Census, there were changes in the sampling area for Repton and you need to be careful when comparing numbers between the censuses. More information about the changes can be found in the section called Census-to-Census Observations ... (see below).
Conecuh County ...
The community of Repton is located in Conecuh County<4>.
The county had a population of 13,228 people at the 2010 Census. With it's population of 282 people, Repton represented 2.13% of the county's total.
In addition, where the town of Repton has a population density of 292.5 people per square mile [112.9 people/km²], Conecuh County averages 15.56 people per square mile [6.01 people/km²].
For more information, please visit our Census Page for Conecuh County.
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for Repton, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Repton. It's important to note that from one Census to the next, the shape and location of the polygon can change.
- Continue Reading ...
- Although we don't have specific information about the shape of the polygon for Repton or how it changed has over time, there is some information that can give us some hints. For example, since the shape of the sampling area is directly related to the shape of the polygon, any change to area probably indicates a new shape for the polygon.
- If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
While generally coinciding with the GPS location (latitude/longitude) of Repton, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Repton.
- Continue Reading ...
- For the 2010 Census, the location was given as:
- Lat: 31.409716° (or 31°24'34" N)
- Lon: -87.238931° (or -87°14'20" W)
- For the 2000 Census, the location given was:
- Lat: 31.408991° (or 31°24'32" N)
- Lon: -87.239326° (or -87°14'21" W)
- The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 291.5 feet to the northeast<5> of the location that was used in the 2000 Census.
- The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2407200) to Repton. This identifier also marks a GPS point on the map, and that point lies within the boundaries of Repton. The GNIS point has been mapped to the latitude/longitude:
- Lat: 31.408304° (or 31°24'29" N)
- Lon: -87.240521° (or -87°14'25" W)
- The GPS location given for the 2010 Census lies 713 feet to the northeast<6> of the point given by the GNIS for Repton. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Repton.
Miscellaneous Information for Repton ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Conecuh County or the town of Repton:
- The GNIS Codes ...
- The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Repton:
- GNIS ID for Repton: 2407200
- GNIS ID for Conecuh County: 161543
- GNIS ID for State of Alabama: 1779775
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 01 (Alabama)
- County Code: 035 (Conecuh County)
- Place Code: 64368 (Repton)
- State & County Code: 01/035 (Alabama / Conecuh County)
- State & Place Code: 01/64368 (Alabama / Repton)
- Misc. Census Codes ...
- Repton is located in Census Region #3 (the South Region) and Division #6 (the East South-Central Division).
- The US Postal Service ZIP Code ...
- While some people have used a ZIP code to identify a community, the purpose of the ZIP code was to make mail delivery more efficient by grouping addresses together. Although the ZIP Code doesn't specifically identify a town like Repton, it does identify addresses that are in (or near) Repton. It's important to remember that the boundaries of a ZIP Code can be changed, re-assigned or overlapped with other ZIP Codes.
- The ZIP code for Repton:36475<7>
- Census ZCTA Codes ...
- The US Census Bureau created statistical entities that they call ZIP Code Tabulation Areas (ZCTAs) and these ZCTAs are frequently confused with the ZIP codes that come from the US Postal Service (USPS).
- ZCTAs were first created for the 2000 Census and at that time, they were based upon the USPS ZIP codes. While largely covering the same areas, the boundaries of a ZCTA do not necessarily match the boundaries of a postal ZIP code with the same number. For example, while a postal ZIP code can cross a county or state line, a Census ZCTA can not. They should be treated as separate entities with no correlation between them.
For more information about the various Federal identification codes, please visit our Misc Page for Repton.
Other Roadside Stops ...
Search for a Community in Alabama
About Conecuh County
Off-the-Road Links ...
Unfortunately, we don't know of a website for Repton. If you can help, please contact us through our Feedback Page.
The official website for State of Alabama: https://www.alabama.gov/
The official website of the U.S. Census Bureau
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
|<1>||Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2019.|
|<2>||Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.|
|<3>||A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).|
|<4>||If you're interested in how the shape of Alabama's counties, including Conecuh, have changed over time, we recommend the Atlas of Historical County Boundaries.|
|<5>||The calculated bearing (or angle) to the 2010 Census location is 335 degrees and a distance of 291.5 feet.|
|<6>||The calculated bearing (or angle) to the GNIS point is 316 degrees and a distance of 713 feet.|
|<7>||When looking for a ZIP Code, whether Repton or elsewhere, it's always best to check the website of the United States Postal Service (USPS).|