|  | 
Nearby Communities in the 1890sWe largely built the following list with information that came from an Atlas published by Rand McNally in 1895.  The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available.  Over time, we will continue to add communities that we find during our research. If it applies, we indicate whether a community no longer exists and is now historic.<1> The Rand McNally Atlas shows that in 1895, Red Bay had  a post office and no railroad service.  In 2020, Red Bay had a population of 3,108 people. The following communities are listed based on their distance from Red Bay, with the one closest to Red Bay listed first. 
Belmont(5 miles [8 km] to the northwest)
Eastman(8 miles [12.9 km] to the southwest)
 
Note: We haven't been able to verify our GPS coordinates for Eastman.  Although the coordinates have been estimated, they should be in the vicinity.<3>Jump to our Gazetteer entry for EastmanEastman is located in Itawamba County (MS)Google driving directions:From your current location to Eastman From Red Bay to Eastman Pleasant Site(8 miles [12.9 km] to the northeast)
Shottsville(12 miles [19.3 km] to the south)
 
Note: The GPS coordinates that we are using for Shottsville have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for ShottsvilleShottsville is located in Marion CountyGood Springs ‑ Historic(13 miles [20.9 km] to the north)
 
Note: The GPS coordinates that we are using for Good Springs have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for Good SpringsGood Springs is located in Colbert CountyMaud(13 miles [20.9 km] to the north)
 
Note: The GPS coordinates that we are using for Maud have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for MaudMaud is located in Colbert CountyDenton ‑ Historic(14 miles [22.5 km] to the northeast)
 
Note: The GPS coordinates that we are using for Denton have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for DentonDenton is located in Colbert CountyHazeldell(14 miles [22.5 km] to the west)
 
Note: The GPS coordinates that we are using for Hazeldell have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for HazeldellHazeldell is located in Prentiss County (MS)Tremont(15 miles [24.1 km] to the southwest)
Bishop(15 miles [24.1 km] to the north)
 
Note: We haven't been able to verify our GPS coordinates for Bishop.  Although the coordinates have been estimated, they should be in the vicinity.<3>Jump to our Gazetteer entry for BishopBishop is located in Colbert CountyGoogle driving directions:From your current location to Bishop From Red Bay to Bishop Belgreen(16 miles [25.7 km] to the east)
Rock Creek(16 miles [25.7 km] to the northeast)
 
Note: The GPS coordinates that we are using for Rock Creek have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for Rock CreekRock Creek is located in Colbert CountyNew Site(16 miles [25.7 km] to the northwest)
Bexar(17 miles [27.4 km] to the south)
 
Note: The GPS coordinates that we are using for Bexar have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for BexarBexar is located in Marion CountyBurton(17 miles [27.4 km] to the northwest)
 
Note: We haven't been able to verify our GPS coordinates for Burton.  Although the coordinates have been estimated, they should be in the vicinity.<3>Jump to our Gazetteer entry for BurtonBurton is located in Prentiss County (MS)Google driving directions:From your current location to Burton From Red Bay to Burton Marietta(18 miles [29 km] to the west)
 
Note: The GPS coordinates that we are using for Marietta have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for MariettaMarietta is located in Prentiss County (MS)Population from the 2020 Census: 253 peopleFulton(19 miles [30.6 km] to the southwest)
 
Note: The GPS coordinates that we are using for Fulton have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for FultonFulton is located in Itawamba County (MS)Population from the 2020 Census: 3,846 peopleJump to TripAdvisor's Tourism page for Fulton <2>Frankfort(19 miles [30.6 km] to the northeast)
 
Note: The GPS coordinates that we are using for Frankfort have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for FrankfortFrankfort is located in Franklin CountyKirkville(19 miles [30.6 km] to the west)
 
Note: We haven't been able to verify our GPS coordinates for Kirkville.  Although the coordinates have been estimated, they should be in the vicinity.<3>Jump to our Gazetteer entry for KirkvilleKirkville is located in Itawamba County (MS)Google driving directions:From your current location to Kirkville From Red Bay to Kirkville Rockwood(20 miles [32.2 km] to the east)
 
Note: We haven't been able to verify our GPS coordinates for Rockwood.  Although the coordinates have been estimated, they should be in the vicinity.<3>Jump to our Gazetteer entry for RockwoodRockwood is located in Franklin CountyGoogle driving directions:From your current location to Rockwood From Red Bay to Rockwood Mantachie(21 miles [33.8 km] to the southwest)
Tilden(21 miles [33.8 km] to the southwest)
 
Note: The GPS coordinates that we are using for Tilden have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for TildenTilden is located in Itawamba County (MS)Barnesville(21 miles [33.8 km] to the south)
 
Note: The GPS coordinates that we are using for Barnesville have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for BarnesvilleBarnesville is located in Marion CountyHackleburg(21 miles [33.8 km] to the southeast)
Hamilton(22 miles [35.4 km] to the southeast)
Isbell(22 miles [35.4 km] to the east)
 
Note: The GPS coordinates that we are using for Isbell have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for IsbellIsbell is located in Franklin CountyMargerum(22 miles [35.4 km] to the north)
 
Note: The GPS coordinates that we are using for Margerum have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for MargerumMargerum is located in Colbert CountyAltitude(22 miles [35.4 km] to the northwest)
Ratliff(22 miles [35.4 km] to the west)
 
Note: The GPS coordinates that we are using for Ratliff have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for RatliffRatliff is located in Itawamba County (MS) 
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists.  However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now.  Unfortunately our sources of data have proven to be unreliable.  If you can provide us with more specific information about Red Bay, please let us know so that we can improve our accuracy. |  | <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |  | <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates.  That said, we have some confidence that we have placed the marker near the actual location.  A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |  | <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS).  While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |  |  |