|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Range had a post office and no railroad service.
The following communities are listed based on their distance from Range, with the one closest to Range listed first.
- Repton
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Repton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Repton
- Repton is located in Conecuh County
- Population from the 2020 Census: 254 people
- Jump to TripAdvisor's Tourism page for Repton <3>
- Wallace
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Wallace have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wallace
- Wallace is located in Escambia County
- Belleville
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Belleville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belleville
- Belleville is located in Conecuh County
- Castleberry
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Castleberry have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Castleberry
- Castleberry is located in Conecuh County
- Population from the 2020 Census: 527 people
- Bermuda
(12 miles [19.3 km] to the north)
- Hammac
(13 miles [20.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Hammac. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hammac
- Hammac is located in Escambia County
- Google driving directions:
- From your current location to Hammac
- From Range to Hammac
- Kirkland
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Kirkland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kirkland
- Kirkland is located in Escambia County
- Monroeville
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Monroeville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monroeville
- Monroeville is located in Monroe County
- Population from the 2020 Census: 5,623 people
- Jump to TripAdvisor's Tourism page for Monroeville <3>
- Sparta ‑ Historic
(15 miles [24.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Sparta. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Sparta
- Sparta is located in Conecuh County
- Sparta has also been known as:
- Old Sparta
- Google driving directions:
- From your current location to Sparta
- From Range to Sparta
- Brewton
(17 miles [27.4 km] to the southeast)
- Jay Villa ‑ Historic
(17 miles [27.4 km] to the east)
- Burnt Corn
(17 miles [27.4 km] to the north)
- Evergreen
(18 miles [29 km] to the northeast)
- Axle
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Axle have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Axle
- Axle is located in Monroe County
- Pollard
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Pollard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pollard
- Pollard is located in Escambia County
- Population from the 2020 Census: 132 people
- Perdue Hill
(20 miles [32.2 km] to the northwest)
- Flomaton
(21 miles [33.8 km] to the south)
- Claiborne
(22 miles [35.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Claiborne. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Claiborne
- Claiborne is located in Monroe County
- Google driving directions:
- From your current location to Claiborne
- From Range to Claiborne
- Bowles
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Bowles have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bowles
- Bowles is located in Conecuh County
- Boykin
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Boykin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boykin
- Boykin is located in Escambia County
- Roberts
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Roberts have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roberts
- Roberts is located in Escambia County
- Wilcox
(25 miles [40.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Wilcox. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Wilcox
- Wilcox is located in Conecuh County
- Google driving directions:
- From your current location to Wilcox
- From Range to Wilcox
- Barlow Bend
(25 miles [40.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Barlow Bend. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Barlow Bend
- Barlow Bend is located in Clarke County
- Google driving directions:
- From your current location to Barlow Bend
- From Range to Barlow Bend
- Bluff Springs
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Bluff Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bluff Springs
- Bluff Springs is located in Escambia County (FL)
- Skinnerton
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Skinnerton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Skinnerton
- Skinnerton is located in Conecuh County
Off-the-Road Links ...
The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Range, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|