Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Malone in the Atlas, the following communities of the 1890's would have been found near the current location of Malone. The following communities are listed based on their distance, with the one closest to Malone listed first.
- Margerum
(3 miles [4.8 km] to the northeast)
- Margerum is located in Colbert County
- Jump to our Gazetteer entry for Margerum
- Bishop
(4 miles [6.4 km] to the south)
- Bishop is located in Colbert County
- Jump to our Gazetteer entry for Bishop
- Maud
(5 miles [8 km] to the south)
- Maud is located in Colbert County
- Jump to our Gazetteer entry for Maud
- Good Springs ‑ Historic
(6 miles [9.7 km] to the south)
- Good Springs is located in Colbert County
- Jump to our Gazetteer entry for Good Springs
- Ingleton ‑ Historic
(6 miles [9.7 km] to the northeast)
- Ingleton is located in Colbert County
- Jump to our Gazetteer entry for Ingleton
- Cherokee
(7 miles [11.3 km] to the east)
- Iuka
(7 miles [11.3 km] to the northwest)
- Iuka is located in Tishomingo County (MS)
- Jump to our Gazetteer entry for Iuka
- Population from the 2020 Census: 2,928 people
- Jump to TripAdvisor's Tourism page for Iuka <2>
- Riverton
(11 miles [17.7 km] to the north)
- Riverton is located in Colbert County
- Jump to our Gazetteer entry for Riverton
- Pleasant Site
(12 miles [19.3 km] to the south)
- Pleasant Site is located in Franklin County
- Jump to our Gazetteer entry for Pleasant Site
- Denton ‑ Historic
(12 miles [19.3 km] to the southeast)
- Denton is located in Colbert County
- Jump to our Gazetteer entry for Denton
- Mountain Mills ‑ Historic
(12 miles [19.3 km] to the east)
- Mountain Mills is located in Colbert County
- Jump to our Gazetteer entry for Mountain Mills
- Barton
(12 miles [19.3 km] to the east)
- Barton is located in Colbert County
- Jump to our Gazetteer entry for Barton
- Rock Creek
(13 miles [20.9 km] to the southeast)
- Rock Creek is located in Colbert County
- Jump to our Gazetteer entry for Rock Creek
- Smithsonia
(13 miles [20.9 km] to the east)
- Smithsonia is located in Lauderdale County
- Jump to our Gazetteer entry for Smithsonia
- Waterloo
(13 miles [20.9 km] to the north)
- Burton
(14 miles [22.5 km] to the southwest)
- Burton is located in Prentiss County (MS)
- Jump to our Gazetteer entry for Burton
- Wright
(14 miles [22.5 km] to the northeast)
- Wright is located in Lauderdale County
- Jump to our Gazetteer entry for Wright
- Burnsville
(14 miles [22.5 km] to the northwest)
- Belmont
(15 miles [24.1 km] to the south)
- Short
(15 miles [24.1 km] to the north)
- Short is located in Tishomingo County (MS)
- Jump to our Gazetteer entry for Short
- Gravelly Springs
(15 miles [24.1 km] to the northeast)
- Gravelly Springs is located in Lauderdale County
- Jump to our Gazetteer entry for Gravelly Springs
- Rhodesville
(16 miles [25.7 km] to the northeast)
- Rhodesville is located in Lauderdale County
- Jump to our Gazetteer entry for Rhodesville
- Frankfort
(18 miles [29 km] to the southeast)
- Frankfort is located in Franklin County
- Jump to our Gazetteer entry for Frankfort
- Jacinto
(18 miles [29 km] to the west)
- Jacinto is located in Alcorn County (MS)
- Jump to our Gazetteer entry for Jacinto
- Haddock ‑ Historic
(18 miles [29 km] to the north)
- Haddock is located in Lauderdale County
- Jump to our Gazetteer entry for Haddock
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Malone, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |