TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Geraldine. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Geraldine.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Geraldine - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 38 communities listed:
- Albertville
(13 miles [20.9 km] to the southwest)
- Altoona
(28 miles [45.1 km] to the southwest)
- Anderson
(18 miles [29 km] to the southeast)
- Arab
(28 miles [45.1 km] to the west)
- Attalla
(24 miles [38.6 km] to the south)
- Boaz
(13 miles [20.9 km] to the southwest)
- Cedar Bluff
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Cedar Bluff have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Bluff
- Cedar Bluff is located in Cherokee County
- Population from the 2020 Census: 1,829 people
- Jump to TripAdvisor's Tourism page for Cedar Bluff <2>
- Centre
(22 miles [35.4 km] to the southeast)
- Cloudland
(30 miles [48.3 km] to the east)
- Collinsville
(9 miles [14.5 km] to the southeast)
- Crossville
(4 miles [6.4 km] to the south)
- Fort Payne
(17 miles [27.4 km] to the east)
- Fyffe
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Fyffe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fyffe
- Fyffe is located in DeKalb County
- Population from the 2020 Census: 1,076 people
- Jump to TripAdvisor's Tourism page for Fyffe <2>
- Gadsden
(23 miles [37 km] to the south)
- Gaylesville
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Gaylesville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gaylesville
- Gaylesville is located in Cherokee County
- Population from the 2020 Census: 200 people
- Jump to TripAdvisor's Tourism page for Gaylesville <2>
- Glencoe
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Glencoe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glencoe
- Glencoe is located in Etowah County
- Population from the 2020 Census: 5,080 people
- Jump to TripAdvisor's Tourism page for Glencoe <2>
- Grant
(18 miles [29 km] to the northwest)
- Guntersville
(17 miles [27.4 km] to the west)
- Henagar
(23 miles [37 km] to the northeast)
- Hokes Bluff
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Hokes Bluff have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hokes Bluff
- Hokes Bluff is located in Etowah County
- Population from the 2020 Census: 4,240 people
- Jump to TripAdvisor's Tourism page for Hokes Bluff <2>
- Hollywood
(25 miles [40.2 km] to the north)
- Ider
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Ider have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ider
- Ider is located in DeKalb County
- Population from the 2020 Census: 737 people
- Jump to TripAdvisor's Tourism page for Ider <2>
- Langston
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Langston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Langston
- Langston is located in Jackson County
- Population from the 2020 Census: 262 people
- Jump to TripAdvisor's Tourism page for Langston <2>
- Leesburg
(18 miles [29 km] to the southeast)
- Mentone
(28 miles [45.1 km] to the northeast)
- New Hope
(25 miles [40.2 km] to the northwest)
- Owens' Cross Roads
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Owens' Cross Roads have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Owens' Cross Roads
- Owens' Cross Roads is located in Madison County
- Population from the 2020 Census: 2,233 people
- Jump to TripAdvisor's Tourism page for Owens' Cross Roads <2>
- Pisgah
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Pisgah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pisgah
- Pisgah is located in Jackson County
- Population from the 2020 Census: 687 people
- Jump to TripAdvisor's Tourism page for Pisgah <2>
- Rainbow City
(27 miles [43.5 km] to the south)
- Rainsville
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Rainsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rainsville
- Rainsville is located in DeKalb County
- Population from the 2020 Census: 5,149 people
- Jump to TripAdvisor's Tourism page for Rainsville <2>
- Scottsboro
(21 miles [33.8 km] to the north)
- Section
(15 miles [24.1 km] to the north)
- Snead
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Snead have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Snead
- Snead is located in Blount County
- Population from the 2020 Census: 837 people
- Jump to TripAdvisor's Tourism page for Snead <2>
- Steele
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Steele have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Steele
- Steele is located in Saint Clair County
- Population from the 2020 Census: 1,093 people
- Jump to TripAdvisor's Tourism page for Steele <2>
- Trenton
(30 miles [48.3 km] to the northwest)
- Union Grove
(25 miles [40.2 km] to the west)
- Valley Head
(26 miles [41.8 km] to the northeast)
- Woodville
(24 miles [38.6 km] to the northwest)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Geraldine. If you can help, please contact us through our Feedback Page.
The official website for DeKalb County: www.dekalbcountyal.us/
The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Geraldine) to Point B.Our distance measurements begin at a specific point in Geraldine. The point we use is located at these GPS coordinates - Latitude: 34.3517, Longitude: -86.0010 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |