A Gazetteer for the United States and Canada

Dayton, Alabama

Nearby Census Genealogy
Cemeteries Tidbits &
Other AL

The location of Dayton

Click for Interactive Map

Click for Interactive Map
(GPS coordinates provided by the GNIS)
Click here for an interactive map for Dayton
and the surrounding area.
Learn About
The Commemorative
Quarter for
The Commemorative Quarter for Alabama

Census Data for Dayton ...

Population ...

The most recent Census Estimate<1> was for 2016 and it gives Dayton a population of 49 people.

The last Decennial Census<2> was in 2010, giving Dayton a population of 52 people.

The town of Dayton is located in Marengo County. The 2010 Census gave Marengo County a population of 21,027 people. This means that Dayton had 0.25% of the county's total population, making it Marengo's 8th most populous community.

At the same time, Alabama had a population of 4,779,736 people.

Area ...

When the Census Bureau conducts a census for a town like Dayton, they draw a boundary around the area in which they are going to conduct their count - this is called a sampling area (or a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the town.

Things like the population, area and housing for Dayton reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Dayton might be slightly different, it's best to check with the U.S. Census Bureau if you need precision.

The 2010 Census shows that the sample polygon for Dayton has a total area of 1 square miles [2.6 km²].

Marengo County has a land area of 976 square miles [2,530.1 km²]. At 1 square miles [2.6 km²], Dayton has 0.1% of the county's total land area.

Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually at the center of the polygon). At the time of the 2010 Census, the sampling area was located at:

Lat:   32° 21' 3"   (or 32.35°)             [Map]

Lon:   -87° 38' 29"   (or -87.64°)

More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).

Population Density ...

Using the population (52 people) and land area (1 square miles [2.6 km²]) values from the 2010 Census, Dayton had a population density of 52.1 people per square mile [20.12 people/km²].

In comparison, the 2000 Census shows Dayton had a population of 60 people and a land area of 1 square miles [2.6 km²]. This gives a population density of 60.1 people per square mile [23.21 people/km²]

NOTE: Be aware that when comparing population density between the 2000 Census and the 2010 Census, there were changes in the sampling area for Dayton. You need to be careful when making such a comparison, the differences are likely to lead to a misleading comparison. More information about these differences can be found in the section Census-to-Census Observations ... (see below).

Housing Units ...

At the time of the 2010 Census, Dayton had 19 Housing Units<3> and with its population of 52 people, this averages 2.74 people per Housing Unit.

The 2010 Census shows Dayton had a land area of 1 square miles [2.6 km²]. This translates to 19.04 Housing Units per square mile [7.35 housing units/km²].

From the Census of 2000: Dayton had 28 Housing Units, a population of 60 people and a land area of 1 square miles [2.6 km²]. This gives a density of 2.14 people per Housing Unit and 28.06 Housing Units per square mile [10.83 housing units/km²].

NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 and the 2010 Census, there were changes in the sampling area for Dayton and you need to be careful when comparing numbers between the censuses. More information about the nature of these the changes can be found in the section called Census-to-Census Observations ... (see below).

Marengo County ...

Dayton is located in Marengo County.

The county had a population of 21,027 people at the 2010 Census. With it's population of 52 people, Dayton represented 0.25% of the county's total.

In addition, where the town of Dayton has a population density of 52.1 people per square mile [20.12 people/km²], Marengo County averages 21.52 people per square mile [8.31 people/km²].

For more information, please visit our Census Page for Marengo County.

Population Rings for Dayton ...

To help identify the number of people who live in Dayton and the surrounding area, we have drawn concentric rings centered on Dayton. We counted the number of communities within each ring and summed their populations.<4>

  Radius   No of
  Since 2010    
5 mi   [8 km]2440-6.18%
10 mi   [16 km]65,118+9.17%
15 mi   [24 km]712,137-0.28%
20 mi   [32 km]912,437-0.4%
25 mi   [40 km]1416,739-1.94%
30 mi   [48 km]1824,556-3.22%

Census-to-Census Observations ...

Introduction ...

When the Census Bureau takes a census count (or enumeration) for Dayton, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Dayton. It's important to note that from one Census to the next, the shape and location of the polygon can change. If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.

Area ...

There is only a very minor difference in the sampling area given between the 2010 Census and the 2000 Census.

The 2010 Census shows that the total area for Dayton was 1 square miles [2.6 km²]. Of this total, only a minor amount of the area is covered by water.

The 2000 Census shows a total area of 1 square miles [2.6 km²]. Of this total, only a minor amount of the area is covered by water.

Location ...

While generally coinciding with the GPS location (latitude/longitude) of Dayton, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Dayton.

For the 2010 Census, the location was given as:

Lat:   32.350958°   (or 32°21'3" N)             [Map]

Lon:   -87.641573°   (or -87°38'29" W)

For the 2000 Census, the location given was:

Lat:   32.349733°   (or 32°20'59" N)             [Map]

Lon:   -87.641247°   (or -87°38'28" W)

The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 457.8 feet to the north<5> of the location that was used in the 2000 Census.

The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2406361) to Dayton. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Dayton. The GNIS point has been mapped to the latitude/longitude:

Lat:   32.350958°   (or 32°21'3" N)             [Map]

Lon:   -87.641572°   (or -87°38'29" W)

The GSP location given for the 2010 Census lies 0.79 feet to the south<6> of the point given by the GNIS for Dayton. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Dayton.

Miscellaneous Information for Dayton ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has referenced one (or more) of the following identifiers when referring to either Marengo County or the town of Dayton:

The GNIS Codes ...

The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Dayton:

GNIS ID for Dayton: 2406361

GNIS ID for Marengo County: 161572

GNIS ID for Alabama: 1779775

The FIPS Codes ...

An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):

State Code: 01 (Alabama)

County Code: 091 (Marengo County)

Place Code: 19912 (Dayton)

State & County Code: 01/091 (Alabama / Marengo County)

State & Place Code: 01/19912 (Alabama / Dayton)

Misc. Census Codes ...

Dayton is located in Census Region #3 (the South Region) and Division #6 (the East South-Central Division).

For more information about the various Federal identification codes, please visit our Misc Page for Dayton.

Other Roadside Stops ...

Search for a Alabama Community

About Marengo County

About Alabama

Off-the-Road Links ...

The official website of the U.S. Census Bureau

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)

Unfortunately, we don't know of a website for Dayton. If you can help, please contact us through our Feedback Page.

The official website for State of Alabama: www.alabama.gov/

Footnotes ...

<1>Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2016.

- Return to Citation

<2>Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.

- Return to Citation

<3>A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).

- Return to Citation

<4>The communities in our count are those provided by the 2010 Census, so keep in mind that our population rings will only include the people living in those communities. Smaller communities usually don't participate directly in the Census and therefore they won't be included. While our count is a close approximation, it shouldn't be considered as a complete or accurate count.

- Return to Citation

<5>The calculated bearing (or the angle) to the 2010 Census location is 12 degrees.

- Return to Citation

<6>The calculated bearing (or the angle) to the GNIS point is 157 degrees.

- Return to Citation

For additional information, please visit our Glossary for Dayton.