Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Old Side Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Old Side Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Old Side Cemetery. We've listed the following communities based on their distance, with the closest first.
- Sumterville
(Less than 2 miles to the northeast)- Jump to our Gazetteer entry for Sumterville
- Sumterville is located in Sumter County
- Bethel ‑ Historic
(3 miles [4.8 km] to the northwest) - Sledge ‑ Historic
(3 miles [4.8 km] to the west) - Emelle
(4 miles [6.4 km] to the northwest)- Jump to our Gazetteer entry for Emelle
- Emelle is located in Sumter County
- Population from the 2020 Census: 46 people
- Boyd
(5 miles [8 km] to the southwest) - Livingston
(7 miles [11.3 km] to the southeast)- Note: The GPS coordinates that we are using for Livingston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Livingston
- Livingston is located in Sumter County
- Population from the 2020 Census: 3,135 people
- Jump to TripAdvisor's Tourism page for Livingston <4>
- Epes
(7 miles [11.3 km] to the east) - Miller
(10 miles [16.1 km] to the east) - Gainesville
(10 miles [16.1 km] to the northeast)- Note: The GPS coordinates that we are using for Gainesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gainesville
- Gainesville is located in Sumter County
- Population from the 2020 Census: 182 people
- Narkeeta ‑ Historic
(12 miles [19.3 km] to the west) - Geiger
(12 miles [19.3 km] to the north)- Jump to our Gazetteer entry for Geiger
- Geiger is located in Sumter County
- Population from the 2020 Census: 142 people
- Moore Town
(12 miles [19.3 km] to the southeast)- Note: The GPS coordinates that we are using for Moore Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moore Town
- Moore Town is located in Sumter County
- Giles
(12 miles [19.3 km] to the northwest)- Jump to our Gazetteer entry for Giles
- Giles is located in Kemper County (MS)
- Porterville
(12 miles [19.3 km] to the west)- Jump to our Gazetteer entry for Porterville
- Porterville is located in Kemper County (MS)
- Boligee
(13 miles [20.9 km] to the east)- Jump to our Gazetteer entry for Boligee
- Boligee is located in Greene County
- Population from the 2020 Census: 276 people
- Jump to TripAdvisor's Tourism page for Boligee <4>
- Electric Mills
(13 miles [20.9 km] to the northwest)- Jump to our Gazetteer entry for Electric Mills
- Electric Mills is located in Kemper County (MS)
- Sucarnoochee
(13 miles [20.9 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Sucarnoochee. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sucarnoochee
- Sucarnoochee is located in Kemper County (MS)
- York
(14 miles [22.5 km] to the south)- Jump to our Gazetteer entry for York
- York is located in Sumter County
- Population from the 2020 Census: 2,218 people
- Former names for York:
- New York Station
- York Station
- Jump to TripAdvisor's Tourism page for York <4>
- Lizzieville
(14 miles [22.5 km] to the northeast)- Jump to our Gazetteer entry for Lizzieville
- Lizzieville is located in Greene County
- Brewersville
(15 miles [24.1 km] to the southeast)- Jump to our Gazetteer entry for Brewersville
- Brewersville is located in Sumter County
- Arrington
(16 miles [25.7 km] to the southeast) - Scooba
(16 miles [25.7 km] to the northwest)- Note: The GPS coordinates that we are using for Scooba have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scooba
- Scooba is located in Kemper County (MS)
- Population from the 2020 Census: 680 people
- Jump to TripAdvisor's Tourism page for Scooba <4>
- Coatopa
(17 miles [27.4 km] to the southeast)- Jump to our Gazetteer entry for Coatopa
- Coatopa is located in Sumter County
- Binnsville
(17 miles [27.4 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Binnsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Binnsville
- Binnsville is located in Kemper County (MS)
- Panola
(17 miles [27.4 km] to the north)- Jump to our Gazetteer entry for Panola
- Panola is located in Sumter County
Off-the-Road Links ...
The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Old Side Cemetery. The point we use is located at these GPS coordinates - Latitude: 32.6912, Longitude: -88.2525 In this case, the coordinates for the Old Side Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |