|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Mt. Zion Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Mt. Zion Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Mt. Zion Cemetery. We've listed the following communities based on their distance, with the closest first.
- Leesdale
(Less than 2 miles to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Leesdale. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Leesdale
- Leesdale is located in Morgan County
- Falkville
(2 miles [3.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Falkville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Falkville
- Falkville is located in Morgan County
- Population from the 2020 Census: 1,256 people
- Jump to TripAdvisor's Tourism page for Falkville <3>
- Lacon
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for Lacon
- Lacon is located in Morgan County
- Hartselle
(4 miles [6.4 km] to the northwest)
- Somerville
(6 miles [9.7 km] to the northeast)
- Jump to our Gazetteer entry for Somerville
- Somerville is located in Morgan County
- Population from the 2020 Census: 782 people
- Cedar Plains
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Cedar Plains. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Cedar Plains
- Cedar Plains is located in Morgan County
- Burningtree Mountain
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Burningtree Mountain have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burningtree Mountain
- Burningtree Mountain is located in Morgan County
- Eva
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Eva have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eva
- Eva is located in Morgan County
- Population from the 2020 Census: 498 people
- Jump to TripAdvisor's Tourism page for Eva <3>
- Priceville
(8 miles [12.9 km] to the north)
- Flint City
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Flint City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flint City
- Flint City is located in Morgan County
- Florette
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for Florette
- Florette is located in Morgan County
- Winton
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Winton. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Winton
- Winton is located in Morgan County
- South Vinemont
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for South Vinemont have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Vinemont
- South Vinemont is located in Cullman County
- Population from the 2020 Census: 636 people
- Vinemont
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Vinemont have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vinemont
- Vinemont is located in Cullman County
- Jump to TripAdvisor's Tourism page for Vinemont <3>
- Bluff City ‑ Historic
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Bluff City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bluff City
- Bluff City is located in Morgan County
- West Point
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for West Point have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Point
- West Point is located in Cullman County
- Population from the 2020 Census: 604 people
- Russell Village
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Russell Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Russell Village
- Russell Village is located in Morgan County
- Valhermoso Springs
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Valhermoso Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Valhermoso Springs
- Valhermoso Springs is located in Morgan County
- Former names for Valhermoso Springs:
- Chunn Springs
- White Sulphur Springs
- Jump to TripAdvisor's Tourism page for Valhermoso Springs <3>
- Danville
(12 miles [19.3 km] to the west)
- Central
(14 miles [22.5 km] to the southwest)
- Jump to our Gazetteer entry for Central
- Central is located in Cullman County
- Simcoe
(14 miles [22.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Simcoe. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Simcoe
- Simcoe is located in Cullman County
- Decatur
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Decatur
- Decatur is located in Morgan County
- Population from the 2020 Census: 54,381 people
- Former names for Decatur:
- Albany
- New Decatur
- Jump to TripAdvisor's Tourism page for Decatur <3>
- Simpson
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Simpson have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Simpson
- Simpson is located in Morgan County
- Austinville
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Austinville
- Austinville is located in Morgan County
- Swancott
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Swancott have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Swancott
- Swancott is located in Limestone County
- Westlake
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Westlake
- Westlake is located in Limestone County
Off-the-Road Links ...
The official website for Morgan County: www.co.morgan.al.us/ The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Mt. Zion Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.4020, Longitude: -86.8797 In this case, the coordinates for the Mt. Zion Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|